Razer DeathAdder V2 Pro
The Razer DeathAdder V2 Pro is a right-handed ergonomic wireless gaming mouse with textured side grips. It connects three ways: Razer HyperSpeed Wireless (2.4 GHz) through the included USB dongle, Bluetooth, or wired through the Speedflex charging cable. It uses a Razer Focus+ 20K DPI optical sensor, optical mouse switches rated for 70M clicks, and seven buttons plus a tactile scroll wheel (listed as “(7+1) independently programmable buttons”).
Up to five on-board profiles let your settings follow you to computers that don’t have Razer Synapse installed. In Razer Synapse you can reassign buttons, change DPI stages and polling rate, tune lift-off distance, and set up Razer Chroma RGB lighting.
What’s in the box
Package contents
- Razer DeathAdder V2 Pro mouse
- Wireless USB dongle (stored in the mouse’s dongle compartment)
- Razer Speedflex charging cable
- USB dongle adapter
- Important Product Information Guide
Requirements
- Product: a PC with a free USB port or Bluetooth 5.0 connectivity.
- Razer Synapse: Windows 7 64-bit (or higher) and an internet connection for software installation.
Mouse parts and controls
| Label | Part | Notes |
|---|---|---|
| A | Left mouse button | |
| B | Right mouse button | |
| C | Scroll wheel | |
| D | DPI stage up | |
| E | DPI stage down | |
| F | Mouse button 5 | |
| G | Mouse button 4 | |
| H | Ultraslick mouse feet | |
| I | Wireless USB dongle compartment | |
| J | Razer Focus+ 20K DPI optical sensor | |
| K | Profile indicator | |
| L | Profile button | |
| M | Mouse dock connector | Mouse dock sold separately |
| N | Slider switch | Bluetooth mode, Power off mode, Razer HyperSpeed Wireless (2.4 GHz) mode |
| O | Wireless USB dongle |
Technical specifications
| Specification | Detail |
|---|---|
| Sensor | True 20,000 DPI Focus+ optical sensor, 99.6% resolution accuracy |
| Maximum speed / acceleration | Up to 650 inches per second (IPS) / 50 G |
| Switches | Razer Optical Mouse Switches rated for 70M clicks |
| Wireless | Dual wireless: HyperSpeed (2.4 GHz) and BLE |
| Buttons | (7+1) independently programmable buttons |
| Mouse feet | 100% PTFE, 0.8 mm thick |
| Default DPI stages | 400 / 800 / 1600 / 3200 / 6400 |
| On-board memory | 4+1 profiles |
| Lighting | Razer Chroma RGB, 16.8 million customizable colors, inter-device color synchronization |
| Cable | 1.8 m / 6 ft Speedflex cable for charging and wired use |
| Battery life | Approximately 70 hours with HyperSpeed wireless and 120 hours with BLE (estimates without lighting; actual life depends on usage settings) |
| Length / width / height | 127 mm / 5.0 in; 72.6 mm / 2.86 in; 42.7 mm / 1.68 in |
| Weight | 88 g / 0.194 lbs (excluding cable and dongle) |
| Other | Razer Synapse 3 enabled; Razer mouse charging dock compatible |
Charging your mouse
Charge the battery
Plug the charging cable from your computer’s USB port into the mouse. Fully charge the mouse before first use for best results. A depleted battery takes approximately 4 hours to charge fully. The cable connection also works as the wired mode.
The mouse needs a USB connection that can supply enough power. Charging may be affected on a non-powered USB hub or a non-powered USB port, such as those commonly found on keyboards and peripherals. Connect the mouse directly to a USB port on your computer.
Low power indicator
When the battery falls below 5%, the Razer logo blinks red twice at repeated intervals. The sequence repeats until the battery is drained or you connect the mouse to the PC with the charging cable.
Connecting your mouse
Razer HyperSpeed Wireless (2.4 GHz) mode
- Remove the compartment cover on the underside of the mouse and take out the wireless USB dongle.
- Reattach the compartment cover, then insert the dongle into a USB port on your PC.
- Push the slider switch to Razer HyperSpeed Wireless (2.4 GHz) mode.
The mouse is now ready to use in wireless mode.
Bluetooth mode
- Push the slider switch to Bluetooth mode.
- Press and hold the two side buttons and the DPI stage up button at the same time for three seconds to activate pairing mode. The Razer logo blinks twice at repeated intervals while the mouse is in pairing mode.
- On your device, turn on Bluetooth, search for new devices, and select “Razer DeathAdder V2 Pro” from the list.
- Wait for the mouse to pair. When it pairs, the Razer logo briefly turns static blue and then returns to its current lighting effect.
Once paired, the mouse automatically reconnects whenever it is in Bluetooth mode and within range. Keep the two devices close together for a faster, more stable connection.
Using the USB dongle adapter
The USB dongle adapter makes the wireless dongle easier to reach and extends its range. Connect the charging cable to a USB port on your computer, plug the other end into the adapter, and then plug the wireless USB dongle into the adapter.
DPI stages and sensitivity
The default DPI stages are 400, 800, 1600 (default), 3200 and 6400. Use the DPI stage up and DPI stage down buttons to move between them. You can customize the stages in Razer Synapse.
In the Performance subtab, sensitivity can be set from 100 to 20000 DPI, with up to 5 stages. By default, the X-axis (horizontal) and Y-axis (vertical) share the same value. Select Enable X-Y Sensitivity to give each axis its own value; this can be used alongside sensitivity stages.
Setting up Razer Synapse
Install Razer Synapse when prompted, or download the installer from razer.com/synapse. An internet connection is required for installation, updates and cloud-based features. Registering a Razer ID account is recommended but optional. Listed features may change with the software version, the connected devices, and supported apps and software.
Synapse tab
The Synapse tab is the default tab when you first launch Razer Synapse.
- Dashboard: an overview where you can reach your Razer devices, modules and online services.
- Modules: shows installed modules and modules available for installation, such as Alexa, Chroma Connect, Chroma Studio, Chroma Visualizer, Hue and Macro.
- Global Shortcuts: lets you bind operations or Razer Synapse functions to custom key combinations. These apply across all device profiles. Only Razer Synapse-enabled device inputs are recognized.
Mouse tab
The Mouse tab is the main tab for this mouse. It holds the Customize, Performance, Lighting, Calibration and Power subtabs. Changes made here are saved automatically to your system and cloud storage.
Customizing buttons
Select a button on the Customize subtab, or click the Sidebar button to see all current assignments. Each button can be changed to one of these functions:
| Function | What it does |
|---|---|
| Default | Returns the button to its original setting |
| Keyboard Function | Assigns a keyboard function; Turbo mode can repeat it while the button is held |
| Mouse Function | Substitutes another mouse function: Left Click, Right Click, Scroll Click, Double Click, Mouse Button 4 (“Backward” in most browsers), Mouse Button 5 (“Forward” in most browsers), Scroll Up, Scroll Down, Scroll Left, Scroll Right. Turbo mode is available on some of these. |
| Sensitivity | Sensitivity Clutch, Sensitivity Stage Up, Sensitivity Stage Down, On-The-Fly Sensitivity, Cycle Up Sensitivity Stages, Cycle Down Sensitivity Stages |
| Macro | Runs a prerecorded sequence of keystrokes and button presses; visible only when the Macro module is installed |
| Inter-device | Changes the functionality of other Razer Synapse-enabled devices, for example using a Razer keyboard to change this mouse’s sensitivity stage |
| Switch Profile | Loads a new set of button assignments; an on-screen notification appears when you switch |
| Switch Lighting | Switches between advanced lighting effects; visible only when the Chroma Studio module is installed |
| Razer Hypershift | Activates Hypershift mode while the button is held |
| Launch Program | Opens an app or website |
| Multimedia | Volume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All, Play / Pause, Previous Track, Next Track |
| Windows Shortcuts | Assigns a Windows operating system shortcut command |
| Text Function | Types prewritten text when pressed, with full Unicode support |
| Disable | Makes the button unusable, useful if it interferes with your gaming |
Sensitivity function details
- Sensitivity Clutch: switches to a predefined DPI while the designated button is held, then returns to the previous sensitivity on release.
- On-The-Fly Sensitivity: press the designated button and move the scroll wheel up or down to raise or lower the DPI.
- Cycle Up / Cycle Down: Cycle Up wraps from the highest stage back to stage 1. Cycle Down wraps from stage 1 to the highest stage.
Hypershift
Hypershift is a secondary set of button assignments that is active while the Hypershift key is held down. By default the Hypershift key is the fn key on a Razer Synapse-supported keyboard. You can also assign any mouse button as a Hypershift key.
Profiles and on-board memory
A profile stores all of a Razer peripheral’s settings. By default its name is based on your system’s name. To add, rename, duplicate or delete a profile, press the Miscellaneous button.
The mouse can store up to 5 profiles from Razer Synapse, so you can use them on systems without the app installed. Press the profile button on the underside to cycle through the stored profiles. The profile indicator color shows which one is selected:
| Profile | Indicator color |
|---|---|
| Active Profile | White |
| Profile 1 | Red |
| Profile 2 | Green |
| Profile 3 | Blue |
| Profile 4 | Cyan |
To assign a profile to an on-board memory slot, click the On-board Profiles button and drag the profile to the slot you want.
Profiles tab and Linked Games
The Profiles tab lets you manage profiles and link them to games and applications. On the Devices subtab you can import profiles from your computer or the cloud with the import button, or create new ones with the add button. The Miscellaneous button renames, duplicates, exports or deletes a profile. Each profile can activate automatically when you run an application through the Linked Games option.
The Linked Games subtab lets you add games, view linked devices, search added games, and sort by alphabetical order, last played or most played. To link a game, click it in the list, click Select a device and its profile to launch automatically during gameplay, and choose the Razer device or Chroma Effect. Added games stay listed even if they aren’t linked to a Razer device.
Performance settings
Polling rate
A higher polling rate means the computer receives the mouse’s status more often, which increases pointer reaction time. Choose 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms) from the dropdown menu in the Performance subtab.
Mouse properties
The Performance subtab also links to Windows Mouse Properties, where you can change operating system settings that directly affect the mouse.
Lighting
Brightness and switch-off lighting
Toggle Brightness to turn lighting off, or use the slider to raise or lower it. Switch Off Lighting is a power-saving tool that can disable lighting when your system display turns off, and/or power the mouse down after it has been idle for a set number of minutes.
Quick effects
| Effect | Description | Setup |
|---|---|---|
| Audio meter | LEDs light up according to the audio level with a default spectrum of colors | Select a Color Boost level |
| Breathing | Lighting fades in and out of the selected color(s) | Select up to 2 colors or randomize colors |
| Reactive | LEDs light up when you click any mouse button | Select a color and a duration |
| Spectrum cycling | Lighting cycles through 16.8 million colors indefinitely | No further customization required |
| Static | LEDs stay lit in the selected color | Select a color |
To synchronize quick effects with other supported Razer Chroma-enabled devices, click the Chroma Sync button. Only devices that support the selected effect will synchronize. Advanced Effects lets you choose a Chroma Effect, and the Chroma Studio button opens the tool for making your own.
Surface calibration and lift-off distance
The Calibration subtab optimizes the sensor for better tracking on your surface.
- Smart Tracking: sets the distance at which the sensor stops tracking when lifted, to avoid unwanted cursor movement. The slider runs from 1 mm to 3 mm. Select Enable Asymmetric Cut-Off to set different lift-off and landing distances.
- Manual Calibration: click Add A Surface, then choose from a list of Razer mouse mats or add your own mat.
Power management
The Power subtab manages energy use when the mouse runs on battery. Wireless Power Saving puts the mouse into sleep mode after it has been idle for a chosen number of minutes (the slider runs from 1 to 15). Low Power Mode lets you choose the battery percentage (0 to 100) below which the wireless mouse enters Low Power Mode.
Settings window and factory reset
Open the Settings window with the gear button in Razer Synapse.
- General tab: change the display language, start-up behavior, theme and on-screen notifications. You can also sync profiles to the cloud manually or view the master guide for connected devices.
- Reset tab: perform a factory reset on all connected Razer devices with on-board memory, and/or reset Razer Synapse tutorials. Resetting a device erases all profiles stored in its on-board memory.
- About tab: shows software information and the copyright statement, and gives links to the terms of use. It also lets you check for software updates and reach Razer’s social communities.
Safety, comfort and maintenance
Safety guidelines
- If the mouse doesn’t work properly and troubleshooting doesn’t help, unplug it and contact the Razer hotline or go to support.razer.com.
- Don’t take the device apart or operate it under abnormal current loads. Doing so voids your warranty.
- Keep the mouse away from liquid, humidity and moisture.
- Operate it only within 0°C (32°F) to 40°C (104°F). If the temperature goes above this range, unplug and/or switch off the mouse until the temperature stabilizes.
Comfort
Long periods of repetitive motion, improper positioning of peripherals, incorrect body position and poor habits may be associated with discomfort and injury to nerves, tendons and muscles. The guide recommends the following:
- Position the keyboard and monitor directly in front of you with the mouse next to it, elbows at your sides and the keyboard within easy reach.
- Set your chair and table height so the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, posture straight and shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. Avoid bending, extending or twisting your hands for long periods during repetitive tasks.
- Don’t rest your wrists on hard surfaces for long periods. Use a wrist rest.
- Don’t sit in one position all day. Get up and stretch your arms, shoulders, neck and legs.
If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back, consult a qualified medical doctor immediately.
Cleaning and surface
Once a month, unplug the mouse from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Don’t use soap or harsh cleaning agents. Some surfaces cause undue wear on the mouse feet, requiring constant care and eventual replacement. The sensor is tuned for Razer mouse mats, which Razer recommends for the best movement and control.
Battery warning
The mouse contains a Li-ion rechargeable battery, and its life expectancy depends on usage. If you suspect the battery is drained, try charging it. Caution: don’t open, mutilate, or expose the battery to conducting materials (metal), moisture, liquid, fire or heat. Doing so may cause the battery to leak or explode, resulting in personal injury.
Warranty and support
The mouse comes with a 2-year limited warranty. Register at razerid.razer.com for Razer benefits. The serial number is printed on the underside of the mouse. For questions, contact the Razer Support Team at support.razer.com. For current warranty terms, visit razer.com/warranty.
Frequently Asked Questions
How long does the DeathAdder V2 Pro take to charge?
A depleted battery charges fully in approximately 4 hours. Plug the charging cable into your computer’s USB port and into the mouse. Charge it fully before first use for best results. Connect it directly to a USB port on your computer, because non-powered hubs and keyboard USB ports may not supply enough power and can affect charging.
How do I connect the mouse with the 2.4 GHz wireless dongle?
Remove the compartment cover on the underside, take out the wireless USB dongle, and put the cover back. Plug the dongle into a USB port on your PC, then push the slider switch to Razer HyperSpeed Wireless (2.4 GHz) mode. If you need a more convenient or longer reach, plug the dongle into the included USB dongle adapter, which connects to your computer with the charging cable.
How do I pair the DeathAdder V2 Pro over Bluetooth?
Push the slider switch to Bluetooth mode. Then press and hold the two side buttons and the DPI stage up button together for three seconds. The Razer logo blinks twice at repeated intervals to show pairing mode is active. On your device, search for Bluetooth devices and choose “Razer DeathAdder V2 Pro.” When pairing succeeds, the logo briefly turns static blue and then returns to its normal lighting effect. After the first pairing, the mouse reconnects automatically in Bluetooth mode when it’s in range.
What does it mean when the Razer logo blinks red twice?
The battery is below 5%. The red double blink repeats until the battery is drained or you connect the mouse to the PC with the charging cable, so plug it in as soon as you see it. The wired connection also lets you keep using the mouse while it charges.
What are the default DPI stages, and how do I change them?
The default stages are 400, 800, 1600 (the default), 3200 and 6400. Press the DPI stage up or down button to move between them. To change the values, open Razer Synapse, go to Mouse > Performance, and edit the stages. You can create up to 5 stages, with sensitivity between 100 and 20000 DPI. Enabling X-Y Sensitivity lets you set different values for horizontal and vertical movement.
How do I change the polling rate?
Open Razer Synapse, go to the Mouse tab, and select the Performance subtab. Use the Polling Rate dropdown to choose 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms). A higher rate makes the computer receive the mouse’s status more often, which increases pointer reaction time.
Can I use my saved profiles on a computer without Razer Synapse?
Yes, if you’ve saved them to the mouse. It can store up to 5 profiles from Razer Synapse. In Mouse > Customize, click the On-board Profiles button and drag a profile into a memory slot. Afterward, press the profile button on the underside to cycle through them. The profile indicator color shows the selected profile: red for Profile 1, green for Profile 2, blue for Profile 3 and cyan for Profile 4. White indicates the active profile.
How do I reassign a button or turn one off?
Open Razer Synapse, go to Mouse > Customize, and select the button you want to change. You can choose from functions such as keyboard functions, other mouse functions, sensitivity controls, profile switching, Hypershift, multimedia controls, Windows shortcuts, text, or launching a program or website. To stop a button from working, choose Disable. To restore it, choose Default. Changes in the Mouse tab are saved automatically to your system and cloud storage.
What is Hypershift, and how do I use it?
Hypershift is a second set of button assignments that is active only while the Hypershift key is held. By default that key is the fn key on a Razer Synapse-supported keyboard. You can also set any mouse button to the Razer Hypershift function so that holding it switches the mouse to the secondary assignments.
How do I stop the cursor from moving when I lift the mouse?
Use Smart Tracking in Razer Synapse under Mouse > Calibration. It lets you set the distance at which the sensor stops tracking when lifted, from 1 mm to 3 mm. If you want different lift-off and landing distances, select Enable Asymmetric Cut-Off. For surface-specific tuning, use Manual Calibration and click Add A Surface to choose a Razer mouse mat or add your own.
How long does the battery last, and how can I conserve it?
Approximate battery life is 70 hours with HyperSpeed wireless and 120 hours with Bluetooth Low Energy. These estimates are without lighting, and actual life depends on usage settings. To conserve power, open Razer Synapse and use the Power subtab to set Wireless Power Saving, which puts the mouse into sleep mode after a chosen idle time of 1 to 15 minutes. Low Power Mode can be set to engage below a battery percentage you choose. Lighting settings also offer a Switch Off Lighting option and a Brightness control.
How do I clean the mouse, and how do I factory reset it?
For cleaning, unplug the mouse from the computer about once a month and wipe it with a soft cloth or cotton swab to prevent dirt buildup. Don’t use soap or harsh cleaning agents. For a factory reset, open the Razer Synapse Settings window with the gear button and use the Reset tab. Resetting a device erases all profiles stored in its on-board memory, so export or save any profiles you want to keep first.
