Mega SwiftLid Trash Can HME0085

hOmeLabs SwiftLid Trash Can HME0085

The hOmeLabs Mega SwiftLid Trash Can is a 13-gallon automatic trash can designed for household waste disposal. It features an infrared sensor that opens the lid when a hand is waved over the sensor area, along with manual buttons for opening and closing the lid.

The Mega SwiftLid Trash Can is available under model numbers HME0085, HME0086, and HME0087. It uses three AA batteries to operate the electronic lid mechanism and includes a 430 stainless steel barrel, a bag retention ring, and an anti-slip base.

The trash can offers two operating methods. The automatic sensor opens the lid and closes it after 5 seconds, while the manual opening button keeps the lid open for 5 minutes. Proper battery installation, sensor cleaning, and lid clearance are important for normal operation.

Product Overview

The hOmeLabs Mega SwiftLid Trash Can combines a stainless steel waste container with a battery-powered lid mechanism. It is intended for household use and allows garbage to be disposed of using either automatic sensor operation or manual controls.

The infrared sensor is located on the control panel near the front of the lid. When activated by hand movement, it opens the lid automatically. Two separate buttons also allow manual control of the lid.

Key Features

• 13-gallon capacity: Provides a waste container for household garbage.
• Infrared sensor operation: Opens the lid automatically when a hand is waved over the sensor area.
• Manual opening button: Opens the lid and keeps it open for 5 minutes.
• Manual closing button: Closes the lid gently when pressed.
• Automatic closing: The lid closes after 5 seconds during sensor operation.
• 430 stainless steel barrel: Forms the main body of the trash can.
• Bag retention ring: Holds the garbage bag in position.
• Anti-slip base: Provides the bottom support for the trash can.
• Battery-powered mechanism: Operates using three AA batteries.

Parts and Components

The Mega SwiftLid Trash Can consists of the electronic lid assembly, stainless steel barrel, bag retention ring, control panel, and battery compartment.

The battery compartment is attached to a string to allow access when batteries need to be installed or replaced.

Control Panel and Button Guide

The SwiftLid control panel contains two manual buttons with an infrared sensor area positioned between them.

The manual opening and closing buttons provide an alternative to infrared sensor operation.

Important: The lid must not be pushed or forced closed. It should be allowed to close automatically or by using the manual closing button.

Technical Specifications

Important Safety Instructions

The hOmeLabs Mega SwiftLid Trash Can contains battery-powered electronic components. Basic safety precautions must be followed to reduce the risk of injury, electrical shock, battery leakage, and damage to the appliance.

General Safety Precautions

• Allow enough space around the trash can for the lid to open and close without obstruction.
• Do not press down on or force the lid to close while it is open.
• Allow the lid to close through its normal operating mechanism.
• Keep the infrared sensor panel away from direct sunlight.
• Keep the sensor panel clean for normal operation.
• Do not use the trash can for purposes other than its intended household use.
• Do not expose the appliance to excessive temperatures.
• Do not use solvents or other chemicals for cleaning.
• Do not immerse the electronic lid cover in water.

Battery Safety

The trash can uses three AA batteries. Incorrect handling may cause battery leakage, damage, or injury.

• Use batteries of the same or equivalent type recommended for the appliance.
• Do not mix new and used batteries.
• Do not mix alkaline, standard carbon-zinc, or rechargeable battery types.
• Do not attempt to recharge non-rechargeable batteries.
• Do not use damaged or modified batteries.
• Prevent metal objects from short-circuiting the battery terminals.
• Remove exhausted batteries and dispose of them safely.
• Remove the batteries when the appliance will not be used for a long period.
• Keep batteries away from excessive temperatures.

Warning: Putting batteries into a fire or hot oven, crushing them, or cutting them may cause an explosion.

Batteries exposed to extremely high temperatures or extremely low air pressure may explode or leak flammable liquids or gases.

Child Safety

The appliance is not intended for use by individuals, including children, with reduced physical, sensory, or mental capabilities or insufficient experience and knowledge unless they have received appropriate supervision or instruction from a person responsible for their safety.

Children must be supervised to prevent them from playing with the appliance.

Water and Electrical Safety

The lid cover contains electronic components and must not be immersed in water.

A damp cloth may be used to clean the lid cover.

If the electrical circuits become damp, the power source must not be connected. The trash can may only be operated when the circuits are dry.

Before First Use

Before operating the Mega SwiftLid Trash Can, the garbage bag must be installed, the batteries must be positioned correctly, and the power switch must be activated.

The lid also requires sufficient clearance for opening and closing.

Initial Preparation

1. Identify the lid, control panel, bag retention ring, and battery compartment.
2. Position the trash can where the lid can move without obstruction.
3. Keep the infrared sensor area away from direct sunlight.
4. Prepare an empty garbage bag.
5. Locate the three AA batteries.
6. Follow the installation procedure to secure the garbage bag and activate the electronic lid.

Setup and Installation Instructions

Step 1: Install the Garbage Bag

The garbage bag must be secured around the bag retention ring to keep it properly positioned inside the trash can.

1. Place an empty garbage bag inside the trash can body.
2. Position the upper opening of the bag around the bag retention ring.
3. Secure the garbage bag around the ring.
4. Adjust the bag so that it sits correctly around the opening.
5. Check that the bag is properly positioned and free of wrinkles.

The garbage bag should fit neatly around the retention ring rather than hanging loosely over the outside of the trash can.

Step 2: Install the AA Batteries

The electronic lid requires three AA batteries for operation.

1. Locate the battery compartment at the bottom of the trash can’s base.
2. Access the battery holder.
3. Insert three AA batteries into the compartment.
4. Follow the positive (+) and negative (−) polarity markings when inserting each battery.
5. Make sure the rubber cover is securely fitted after installation.
6. Confirm that the battery compartment remains attached to its retaining string for future access.

Important: Incorrect battery orientation may interfere with the lid’s operation.

Step 3: Turn On the Power Switch

After installing the batteries:

1. Locate the power switch on the trash can.
2. Turn the power switch on.
3. The electronic lid mechanism is now activated.

The lid can be operated using the manual buttons or the infrared sensor.

Operating Instructions

The Mega SwiftLid Trash Can supports manual button operation and automatic infrared sensor operation.

How to Open the Lid Manually

The manual opening function keeps the lid open for 5 minutes.

1. Make sure the power switch is turned on.
2. Locate the left button on the control panel.
3. Tap the Manual Button / On.
4. The lid will open slowly.
5. The lid will remain open for 5 minutes.

After the 5-minute opening period, the lid closes automatically.

How to Close the Lid Manually

The right button controls manual closing.

1. Locate the Manual Button / Off on the right side of the control panel.
2. Press the button.
3. The lid will close gently.

Do not push the lid down by hand. The electronic mechanism should complete the closing movement.

How to Use the Infrared Sensor

The intelligent infrared sensor allows the lid to operate automatically.

1. Make sure the trash can is powered on.
2. Move a hand over the sensor area on the control panel.
3. Gently wave the hand above the sensor.
4. The lid will open automatically.
5. The lid will close automatically after 5 seconds.

Note: Do not push the lid during automatic operation. The mechanism closes the lid without manual force.

Manual and Sensor Operation Comparison

Removing and Replacing the Garbage Bag

The garbage bag must be removed from the trash can body when it becomes full.

Removing a Full Garbage Bag

1. Remove the lid from the trash can.
2. Remove the bag retention ring.
3. Lift the filled garbage bag out of the trash can body.
4. Dispose of the garbage bag properly.

Installing a New Garbage Bag

1. Place a new empty garbage bag inside the trash can body.
2. Position the opening of the garbage bag around the bag retention ring.
3. Secure the bag around the ring.
4. Adjust the bag so that it fits correctly without wrinkles.
5. Return the lid to its operating position.

The bag retention ring holds the garbage bag in place during normal use.

Cleaning and Maintenance

Proper cleaning of the electronic lid cover and infrared sensor area helps maintain normal operation.

Cleaning the Lid Cover

The lid cover contains electronic components and must not be immersed in water.

1. Use a damp cloth to clean the lid cover.
2. Wipe the surface to remove dirt.
3. Avoid exposing the electronic components to water.
4. Do not use solvents or other chemicals.

Warning: Do not immerse the lid cover in water.

Cleaning the Infrared Sensor

A dirty sensor area can interfere with the automatic opening mechanism.

1. Locate the sensor area between the two manual buttons.
2. Check the surface for dirt.
3. Use a clean cloth to wipe the sensor area.
4. Keep the sensor panel clean during normal use.

Direct sunlight should also be avoided because it may interfere with sensor operation.

Keeping the Electronic Components Dry

If the electrical circuits become damp, the power source must not be connected.

The trash can may only be operated when the circuits are dry.

Do not attempt to operate the electronic lid mechanism while its electrical circuits are damp.

Battery Replacement and Storage

Battery power affects the movement of the electronic lid. Low battery power is identified as a possible cause of abnormal lid opening, closing, or slow operation.

Replacing the Batteries

When the batteries have low power:

1. Access the battery compartment at the bottom of the base.
2. Remove the exhausted batteries.
3. Insert three AA batteries with the correct polarity.
4. Secure the rubber cover.
5. Keep the battery compartment attached to its retaining string.
6. Activate the power switch.

Do not mix new and used batteries or different battery types.

Long-Term Storage

When the Mega SwiftLid Trash Can will not be used for an extended period, the batteries must be removed.

Removing the batteries helps prevent leakage that could damage the electronic components.

The appliance and its batteries must not be exposed to excessive temperatures.

Troubleshooting Guide

The following troubleshooting procedures address abnormal lid movement, sensor problems, and low battery power.

Lid Does Not Open Normally

Incorrect battery installation, insufficient battery power, dirt on the sensor, or damp electrical circuits may affect lid opening.

The following checks should be performed:

1. Check whether the three AA batteries are installed correctly.
2. Verify the positive and negative battery orientation.
3. Check whether the batteries have low power.
4. Turn on the power switch again.
5. Check the infrared sensor area for dirt.
6. Wipe the sensor area with a clean cloth if necessary.

If the electrical circuits are damp, do not connect the power source. The trash can should only be operated when dry.

Lid Does Not Close Normally

Obstructions, reflective surfaces, or low battery power can affect lid closing.

1. Check for objects around the lid.
2. Remove anything blocking the opening or closing movement.
3. Check whether the trash can is positioned close to a highly reflective surface.
4. Maintain distance from reflective surfaces such as white walls.
5. Check the battery power and replace low-power batteries when needed.

Do not force the lid to close manually.

Lid Opens Slowly

Low battery power is a possible cause of slow lid opening.

The AA batteries should be replaced when their power becomes low.

During replacement, each battery must be installed according to the polarity markings.

Defective or Malfunctioning Product

If the trash can malfunctions or appears defective, hOmeLabs Customer Service should be contacted for assistance.

A defective product must be kept pending further instructions and should be clearly marked or stored where it cannot be used accidentally.

The product should be retained in its original condition as far as possible because changes or further damage may affect the manufacturer’s ability to resolve the problem.

Product Disposal and Environmental Information

The Mega SwiftLid Trash Can contains electronic components and batteries that require appropriate disposal.

Electronic Waste Disposal

The product’s disposal instructions refer to EC Directive 2012/19/EU.

At the end of its working life, the appliance must not be disposed of as unsorted municipal waste or ordinary household waste.

Appropriate disposal methods include:

1. Taking the appliance to a designated local authority waste collection center.
2. Using an authorized dealer that provides appliance collection services.
3. Using an appropriate collection system for electronic waste.

Old products may contain recoverable materials that can be processed through suitable recycling channels.

Improper disposal can allow hazardous substances to contaminate the environment, including groundwater.

The crossed-out wheeled bin symbol indicates that the product requires separate waste collection.

Battery Disposal

Exhausted batteries must be removed from the appliance and disposed of safely.

Batteries must not be placed in fire or hot ovens, crushed, or cut because these actions may cause explosions.

RoHS Compliance

The Mega SwiftLid Trash Can is stated to comply with Directive 2011/65/EU, which restricts certain hazardous substances in electrical and electronic equipment.

Warranty Information

hOmeLabs provides a limited one-year warranty for qualifying products purchased new and unused from hOmeLabs Technologies, LLC or an authorized reseller.

The warranty applies when a defect arises wholly or substantially from faulty manufacturing, defective parts, or workmanship during the warranty period.

Warranty Coverage

For an eligible warranty claim, hOmeLabs may provide:

• Repair of the defective product.
• Replacement of defective parts.
• Necessary labor to restore the product to its original specifications.
• Replacement of the product instead of repair.

The manufacturer’s warranty obligation is limited to the applicable repair or replacement.

Warranty Exclusions

The warranty does not apply to damage caused by:

• Normal wear and tear.
• Abuse or mishandling.
• Accidents.
• Failure to follow the operating instructions.
• Exposure to liquids.
• Foreign particles entering the product.
• Unauthorized servicing or modifications.
• Commercial or non-household use.

The warranty becomes void if unauthorized third parties attempt repairs or if spare parts other than those supplied by hOmeLabs are used.

Proof of Purchase

An original proof of purchase is required for warranty claims.

The receipt must show the purchase date and should be kept for future reference.

Product Registration

The Mega SwiftLid Trash Can can be registered through the hOmeLabs website: https://homelabs.com/reg

Registration provides access to product updates, coupons, and other relevant information.

Product registration is not required to activate warranty coverage. Registration also does not replace the need for original proof of purchase.

Out-of-Warranty Service

Service may be arranged after the one-year warranty period at an additional cost.

Customers may contact hOmeLabs Customer Service regarding product problems regardless of warranty status.

The limited warranty provides specific legal rights. Additional rights may vary by state, country, or province.

Customer Support Information

hOmeLabs Customer Service provides assistance with operating questions, defective products, and warranty-related concerns.

Importer and Responsible Person

If the trash can malfunctions or appears defective, the product should be retained while Customer Service provides further instructions.

Frequently Asked Questions

What batteries does the hOmeLabs Mega SwiftLid Trash Can use?

The Mega SwiftLid Trash Can models HME0085, HME0086, and HME0087 use three AA batteries. Three AA batteries are included with the appliance. Each battery must be installed according to the positive (+) and negative (−) markings inside the battery compartment.

How does the SwiftLid Trash Can sensor work?

The infrared sensor opens the lid automatically when a hand is gently waved over the sensor area. After opening, the lid closes automatically after 5 seconds. The sensor panel should be kept clean and away from direct sunlight.

How long does the Mega SwiftLid Trash Can lid stay open?

The lid stays open for 5 minutes when activated using the left manual opening button. When opened using the infrared sensor, it closes after 5 seconds.

Why is the hOmeLabs HME0085 trash can not opening normally?

Abnormal lid opening may be caused by incorrect battery installation, low battery power, a dirty infrared sensor, or damp electrical circuits. Battery polarity and power should be checked, and the sensor should be cleaned if dirty. The power source must not be connected if the electrical circuits are damp.

Why does the SwiftLid Trash Can lid stay open?

The lid may stay open because an object is blocking its movement or because nearby highly reflective surfaces interfere with normal operation. Obstructions should be removed, and the trash can should be kept at a distance from reflective surfaces such as white walls. Low battery power may also affect lid closing.

How do I replace the garbage bag in the Mega SwiftLid Trash Can?

To remove a full garbage bag, first remove the lid and then the bag retention ring. Lift out the filled bag and dispose of it properly. A new garbage bag should be placed inside the trash can and secured around the retention ring without wrinkles.

How should the SwiftLid Trash Can sensor and lid be cleaned?

The lid cover should be cleaned using a damp cloth, while the infrared sensor area can be wiped with a clean cloth. The electronic lid cover must not be immersed in water, and solvents or other cleaning chemicals must not be used.

What is the warranty period for the hOmeLabs Mega SwiftLid Trash Can?

The hOmeLabs Mega SwiftLid Trash Can has a limited one-year warranty for eligible manufacturing, parts, or workmanship defects. An original proof of purchase showing the purchase date is required for warranty claims. Customer Service can be contacted at https://homelabs.com/help or help@homelabs.com.