Razer Basilisk V3 RZ01-04000

Basilisk V3 RZ01-04000

Razer Basilisk V3 guide covering parts, specs, DPI stages, scroll modes, profiles, Synapse settings, lighting, calibration, cleaning and safety.
Supporting Models: RZ01-04000
English

Read The Master Guide (PDF) Online

View the original document directly below. For safety-critical procedures, follow the manufacturer’s instructions for your exact model.

Razer Basilisk V3 RZ01-04000

The Razer Basilisk V3 is a wired, right-handed ergonomic gaming mouse. It has eleven independently programmable buttons, a 4-way Razer HyperScroll tilt wheel with notched and free-spinning modes, a Focus+ 26K DPI optical sensor, and 11 Razer Chroma lighting zones. A multi-function trigger on the left side temporarily changes sensitivity while held by default. Razer Synapse lets you remap buttons, set sensitivity stages and polling rate, tune lighting, calibrate tracking and store up to 5 profiles. Stored profiles keep working on computers that do not have Synapse installed.

Parts and Controls

The mouse has the following parts and controls:

LabelPart or control
ARazer Speedflex Cable
BLeft mouse button
CRight mouse button
DRazer HyperScroll Tilt Wheel
EScroll mode button (switches between Free-Spin Scrolling and Tactile Cycling)
FDPI cycle button
GMulti-function trigger
HMouse button 5
IMouse button 4
JUltraslick mouse feet
KRazer Focus+ 26K DPI Optical Sensor
LProfile indicator
MProfile button

The profile indicator and profile button, along with the sensor, are on the underside of the mouse. The serial number is printed on a label on the underside as well.

Technical Specifications

Performance and Features

  • True 26,000 DPI Focus+ optical sensor with 99.6% resolution accuracy
  • Up to 650 inches per second (IPS) / 50 G acceleration
  • Advanced lift-off/landing distance customization
  • Eleven independently programmable buttons
  • Razer Optical Mouse Switches Gen-2 rated for 70M clicks
  • Ergonomic right-handed design with injection molded rubber grips
  • 4-way Razer HyperScroll tilt wheel with electronically actuated notched and free-spinning modes
  • On-the-fly sensitivity adjustment (default stages: 400/800/1600/3200/6400)
  • Hybrid on-board and cloud storage (4+1 profiles)
  • Razer Synapse 3 enabled
  • 11 Razer Chroma lighting zones with true 16.8 million customizable color options
  • 1.8 m / 6 ft Speedflex cable

Approximate Size and Weight

MeasurementValue
Length130 mm / 5.11 in
Width60 mm / 2.36 in
Height42.5 mm / 1.67 in
Weight101 g / 3.56 oz

System Requirements

  • Product: a USB-A port
  • Razer Synapse: Windows 10 64-bit (or higher) and an internet connection for software installation

Getting Started

Install Razer Synapse

Install Razer Synapse when prompted, or download the installer from razer.com/synapse. An internet connection is required for installation, updates and cloud-based features. Registering for a Razer ID account is recommended but optional. Synapse features are subject to change based on the current software version, connected devices, and supported apps and software.

Switch Between Stored Profiles

The mouse can store up to 5 profiles from Razer Synapse, so you can use them on systems without the app installed. Press the profile button to cycle through the stored profiles. The color of the profile indicator shows which profile is selected.

ProfileIndicator color
Active ProfileWhite
Profile 1Red
Profile 2Green
Profile 3Blue
Profile 4Cyan

Use the Multi-Function Trigger

By default, holding down the multi-function trigger temporarily changes the mouse’s sensitivity. You can customize the trigger for other tasks in Razer Synapse.

Switch Scroll Modes

Press the scroll mode button to switch the Razer HyperScroll Tilt Wheel between two modes:

  • Free-Spin Scrolling: unbridled scroll wheel navigation.
  • Tactile Cycling: more precise control of scroll wheel movement.

In Razer Synapse you can also enable Smart-Reel, which makes the wheel switch between the two modes automatically.

Default DPI Stages

The default DPI stages are 400, 800, 1600 (default), 3200 and 6400. You can customize them in Razer Synapse.

Razer Synapse: Synapse Tab

The Synapse tab is the default tab when you first launch Razer Synapse.

Dashboard

The Dashboard subtab is an overview of your Razer Synapse, where you can access all your Razer devices, modules and online services.

Modules

The Modules subtab shows all installed and available modules for installation.

Global Shortcuts

Global Shortcuts let you bind operations or Razer Synapse functions to custom key combinations from any Razer Synapse-enabled device inputs. They apply across all device profiles. Only Razer Synapse-enabled device inputs are recognized.

Razer Synapse: Mouse Tab

The Mouse tab is the main tab for the Razer Basilisk V3. You can change button assignments, DPI sensitivity and lighting here. Changes made under this tab are automatically saved to your system and cloud storage.

Customize: Profiles, Scroll Wheel and Hypershift

A profile is data storage for all your Razer peripheral settings. By default, the profile name is based on your system’s name. To add, rename, duplicate or delete a profile, press the Miscellaneous button.

The Scroll wheel settings are:

  • Scroll acceleration: Synapse detects how fast you scroll and virtually amplifies the wheel’s movement the faster you scroll.
  • Scrolling mode: switch between Tactile mode (more precision with satisfying feedback) and Free-spin mode (speed through content with ease).
  • Smart-Reel: when enabled, the wheel automatically activates Free-Spin mode during fast scrolling movements and reverts to Tactile mode when there is no scroll movement.

To assign a profile to an on-board memory slot, click the On-board Profiles button and drag the profile onto the slot you want.

Hypershift mode is a secondary set of button assignments that is active while the Hypershift key is held down. By default, the Hypershift key is the fn key of a Razer Synapse-supported keyboard, but you can assign any mouse button as the Hypershift key instead.

Customize: Button Assignments

Click the Sidebar button to see all current button assignments, or select a button directly on the Customize tab. After selecting a button, you can change it to one of the following functions.

FunctionWhat it does
DefaultReturns the button to its original setting.
Keyboard FunctionTurns the button into a keyboard function. Turbo mode emulates a repeated keyboard function while the button is held down.
Mouse FunctionSubstitutes another mouse function (see the list below). Turbo mode is available for some mouse functions.
SensitivityChanges DPI with the touch of a button (see the list below).
MacroRuns a prerecorded sequence of keystrokes and button presses with precise timing. Visible only when the Macro module is installed.
Inter-deviceChanges the functionality of other Razer Synapse-enabled devices; some options are device-specific, such as using a Razer gaming keyboard to change the mouse’s Sensitivity Stage.
Switch ProfileChanges profiles and loads a new set of button assignments. An on-screen notification appears whenever you switch profiles.
Switch LightingSwitches between advanced lighting effects. Visible only when the Chroma Studio module is installed.
Razer HypershiftActivates Hypershift mode as long as the button is held down.
Launch ProgramOpens an app or a website. Search for the app or write the website address.
MultimediaAssigns multimedia controls (see the list below).
Windows ShortcutsAssigns a Windows operating system shortcut command.
Text FunctionTypes prewritten text when the button is pressed. Full Unicode support, and you can insert special symbols from character maps.
DisableRenders the button unusable, for buttons you do not want to use or that interfere with your gaming.

Mouse Function options:

  • Left Click, Right Click, Double Click
  • Scroll Click: activates the universal scrolling function
  • Mouse Button 4: performs a “Backward” command for most internet browsers
  • Mouse Button 5: performs a “Forward” command for most internet browsers
  • Scroll Up, Scroll Down, Scroll Left, Scroll Right

Sensitivity options:

  • Sensitivity Clutch: changes sensitivity to a predefined DPI while the button is held; releasing it returns to the previous sensitivity.
  • Sensitivity Stage Up / Down: raises or lowers the current sensitivity by one stage.
  • On-The-Fly Sensitivity: press the designated button and move the scroll wheel up or down to increase or decrease the current DPI.
  • Cycle Up Sensitivity Stages: raises the stage by one; after the highest stage, the next press returns to stage 1.
  • Cycle Down Sensitivity Stages: lowers the stage by one; after stage 1, the next press goes to the highest stage.

Multimedia options: Volume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All (microphone and audio output), Play / Pause, Previous Track and Next Track.

Performance

The Performance subtab controls sensitivity, acceleration and polling rate.

  • Sensitivity: the distance the cursor travels based on how far the mouse moves. A higher DPI moves the cursor farther for the same mouse movement.
  • Sensitivity Stages: preset sensitivity values. You can create up to 5 stages and cycle through them with the sensitivity stage up/down buttons.
  • Enable X-Y Sensitivity: by default, the X-axis (horizontal) and Y-axis (vertical) share the same value. Select this option to set a different value for each axis. It can be used together with Sensitivity Stages.
  • Polling Rate: choose 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms). A higher polling rate means the computer receives mouse status information more often, which increases pointer reaction time.
  • Mouse Properties: opens Windows Mouse Properties, where operating system settings can directly affect the mouse.

Lighting

Use the Lighting subtab to change the mouse’s light settings.

  • Brightness: toggle the lighting off, or raise or lower the luminance with the slider.
  • Switch Off Lighting: a power-saving tool that turns lighting off when your system’s display turns off and/or after the mouse has been idle for a set time.
  • Advanced Effects: choose a Chroma Effect for your Chroma-enabled peripheral. Press the Chroma Studio button to make your own.

If you have other supported Razer Chroma-enabled devices, click the Chroma Sync button to synchronize their quick effects with the mouse. Only devices that support the selected lighting effect will synchronize.

Quick effectDescriptionHow to set up
Audio meterLEDs light up according to the audio level, with a default spectrum of colorsSelect a Color Boost level
BreathingLighting fades in and out of the selected color(s)Select up to 2 colors or randomize colors
FireLEDs light up in warm colors to mimic flamesNo further customization required
ReactiveLEDs light up when you click any mouse buttonSelect a color and a duration
Spectrum cyclingLighting cycles between 16.8 million colors indefinitelyNo further customization required
StarlightEach LED has a chance of fading in and out at a random time and durationSelect up to 2 colors or randomize colors, and select a duration
StaticLEDs stay lit in the selected colorSelect a color
WaveLighting scrolls in the selected directionSelect left-to-right or right-to-left

Calibration

The Calibration subtab optimizes the sensor to your surface for better tracking.

  • Smart Tracking: set the distance at which the sensor stops tracking when lifted from the surface, to avoid unwanted cursor movement. Select Enable Asymmetric Cut-Off to set different lift-off and landing distances.
  • Manual Calibration: click Add A Surface, then select a Razer mouse mat from the list or add your own mouse mat.

Razer Synapse: Profiles Tab

The Profiles tab manages all your profiles and links them to games and applications.

Devices

Use the Devices subtab to see which games are linked to each device’s profiles, or which Chroma Effect is linked to specific games. Import profiles from your computer or the cloud with the import button, or create new profiles for the selected device with the add button. To rename, duplicate, export or delete a profile, press the Miscellaneous button. Each profile can activate automatically when you run an application through the Linked Games option.

Linked Games

Use the Linked Games subtab to add games, view devices linked to games, or search for added games. You can sort games alphabetically, by last played or by most played. Added games stay listed even if they are not linked to a Razer device.

To link a game, click it in the list, then click Select a device and its profile to launch automatically during gameplay and choose the Razer device or Chroma Effect. Once linked, click the Miscellaneous button next to the Chroma Effect or device to choose a specific Chroma Effect or profile.

Razer Synapse: Settings Window

Open the Settings window with the settings button in Razer Synapse.

  • General tab: change the display language, start-up behavior, display theme and on-screen notifications. You can also manually sync profiles to the cloud, or view the master guide of every connected Razer device and installed module.
  • Reset tab: perform a factory reset on all connected Razer devices with on-board memory, and/or reset the Synapse tutorials so they appear again on its next launch. Resetting a device erases all profiles stored in that device’s on-board memory.
  • About tab: shows brief software information and the copyright statement, links to the terms of use, lets you check for software updates, and gives quick access to Razer’s social communities.

Safety and Maintenance

Safety Guidelines

  • If you have trouble operating the mouse and troubleshooting does not work, unplug it and contact the Razer hotline or go to support.razer.com.
  • Do not take the device apart (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
  • Keep the device away from liquid, humidity or moisture.
  • Operate the device only within 0°C (32°F) to 40°C (104°F). If the temperature exceeds this range, unplug and/or switch off the device to let the temperature stabilize to an optimal level.
  • Avoid looking directly at the tracking beam or pointing it into anyone’s eyes. The beam is not visible to the naked human eye and is set to Always-On mode.

Comfort

Long periods of repetitive motion, improper positioning of computer peripherals, incorrect body position and poor habits may be associated with physical discomfort and injury to nerves, tendons and muscles. Razer recommends:

  • Position your keyboard and monitor directly in front of you with the mouse next to it. Keep your elbows at your sides, not too far away, and the keyboard within easy reach.
  • Adjust chair and table height so the keyboard and mouse are at or below elbow height.
  • Keep your feet well supported, posture straight and shoulders relaxed.
  • During gameplay, relax your wrist and keep it straight. If you repeat the same tasks, try not to bend, extend or twist your hands for long periods.
  • Do not rest your wrists on hard surfaces for long periods. Use a wrist rest.
  • Customize your keyboard keys to minimize repetitive or awkward motions.
  • Do not sit in the same position all day. Get up, step away from your desk, and stretch your arms, shoulders, neck and legs.

If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back while using the mouse, consult a qualified medical doctor immediately.

Cleaning and Care

The mouse needs minimal maintenance. Once a month, unplug it from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.

Razer recommends a premium Razer mouse mat for the best movement and control. Some surfaces cause undue wear on the feet, requiring constant care and eventual replacement. The sensor is tuned and optimized for Razer mouse mats and has been tested extensively to read and track best on them.

Warranty and Support

The mouse comes with a 2-year limited warranty. Register at razerid.razer.com to get exclusive Razer benefits. For questions, contact the Razer Support Team at support.razer.com. The latest warranty terms are at razer.com/warranty. The warranty is not valid outside the product’s intended region.

Frequently Asked Questions

What are the default DPI stages on the Razer Basilisk V3?

The default stages are 400, 800, 1600, 3200 and 6400 DPI, with 1600 as the default. You can customize the stages in Razer Synapse, where you can create up to 5 sensitivity stages. You can also set different horizontal and vertical values by selecting Enable X-Y Sensitivity.

How do I switch between Free-Spin and Tactile scrolling?

Press the scroll mode button. Free-Spin Scrolling lets the wheel move freely for fast navigation, and Tactile Cycling gives notched, more precise control. To have the mouse switch between the two on its own, turn on Smart-Reel in Razer Synapse.

What does Smart-Reel do?

Smart-Reel makes the mouse change scroll modes automatically. When you scroll fast, the wheel activates Free-Spin mode, and it goes back to Tactile mode when there is no scroll movement. Enable it from the Scroll wheel settings on the Mouse tab in Razer Synapse.

What does the multi-function trigger do?

By default, holding the multi-function trigger temporarily changes the mouse’s sensitivity. You can assign it other tasks in Razer Synapse. If you want a button to switch to a predefined DPI only while it is held, the Sensitivity Clutch function does this, and releasing the button returns to the previous sensitivity.

How do I switch profiles, and what do the indicator colors mean?

Press the profile button on the underside of the mouse to cycle through your stored profiles. The profile indicator shows the selected profile: white for the Active Profile, red for Profile 1, green for Profile 2, blue for Profile 3 and cyan for Profile 4. The mouse stores up to 5 profiles from Razer Synapse, so they also work on computers without the app installed.

What polling rates does the mouse support?

You can choose 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms) in the Performance subtab of Razer Synapse. A higher polling rate means the computer receives information about the mouse more often, which increases pointer reaction time.

What do I need to use Razer Synapse with this mouse?

You need a Windows 10 64-bit (or higher) computer and an internet connection for the software installation. The mouse itself connects to a USB-A port. Install Synapse when prompted or download the installer from razer.com/synapse. A Razer ID account is recommended but optional.

How do I change the lift-off distance?

Open the Calibration subtab in Razer Synapse and use Smart Tracking to set the distance at which the sensor stops tracking when you lift the mouse. To set different lift-off and landing distances, select Enable Asymmetric Cut-Off. For tuning to a specific mouse mat, use Manual Calibration and click Add A Surface to pick a Razer mouse mat or add your own.

What is Hypershift mode?

Hypershift is a secondary set of button assignments that is active only while the Hypershift key is held. By default, the Hypershift key is the fn key on a Razer Synapse-supported keyboard, but you can assign any mouse button to it. To set a mouse button as the key, choose Razer Hypershift as that button’s function.

How should I clean the Razer Basilisk V3?

Once a month, unplug the mouse from the computer and wipe it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Also keep the mouse away from liquid, humidity and moisture.

What happens if I factory reset the mouse in Razer Synapse?

All profiles stored in the mouse’s on-board memory are erased. Open the Settings window in Razer Synapse and go to the Reset tab to reset connected Razer devices that have on-board memory. The same tab can reset the Synapse tutorials so they show again the next time you launch the software.

What warranty does the mouse have, and where is the serial number?

The mouse has a 2-year limited warranty, and the latest terms are at razer.com/warranty. The warranty is not valid outside the product’s intended region, and taking the device apart voids it. The serial number is on the underside of the mouse. Register at razerid.razer.com, or contact the Razer Support Team at support.razer.com.

Found something that needs correcting?

If a model number, instruction, specification, or document link looks incorrect, please send us the page URL and relevant details.