Razer Viper Ultimate Wireless Gaming Mouse
The Razer Viper Ultimate is a lightweight, ambidextrous gaming mouse that connects wirelessly through a 2.4 GHz USB dongle using Razer’s Hyperspeed wireless technology, or by cable for wired use and charging. It combines a Focus+ 20,000 DPI optical sensor, Razer Optical Mouse Switches rated for 70M clicks and eight independently programmable buttons. Battery life is approximately 70 hours without lighting, depending on usage settings. A Razer Mouse charging dock is supported, and Razer Synapse 3 handles button assignments, DPI stages, polling rate, Chroma lighting, surface calibration and power settings.
Controls and Parts
Parts Identification
| Label | Part |
|---|---|
| A | Left mouse button |
| B | Right mouse button |
| C | Scroll wheel |
| D | Mouse button 5 |
| E | Mouse button 4 |
| F | Ultraslick mouse feet |
| G | Wireless USB dongle compartment |
| H | Razer Focus+ 20,000 DPI Optical Sensor |
| I | DPI indicator |
| J | DPI cycle up button |
| K | Power on/off switch |
| L | Wireless USB dongle |
| M | Charging cable |
| N | Razer Chroma Mouse Charging Dock* |
| O | USB dongle adapter* |
*The charging dock and USB dongle adapter are subject to change based on the current retail version.
DPI Stages and the DPI Indicator
Press the DPI cycle up button (J) on the underside to change DPI stages. The default stages are 800, 1800 (default), 4000, 9000 and 20000, and you can customize them in Razer Synapse 3. The DPI indicator (I) shows the active stage by color:
| DPI | Indicator color |
|---|---|
| 800 | Red |
| 1800 (default) | Green |
| 4000 | Blue |
| 9000 | Cyan |
| 20000 | Yellow |
Key Specifications
| Specification | Detail |
|---|---|
| Sensor | True 20,000 DPI Focus+ optical sensor with 99.6% resolution accuracy |
| Tracking | Up to 650 inches per second (IPS) / 50 G acceleration |
| Lift-off/landing | Advanced lift-off/landing distance customization |
| Wireless | Hyperspeed wireless technology, 2.4GHz dongle |
| Buttons | Eight independently programmable buttons |
| Switches | Razer Optical Mouse Switches rated for 70M clicks |
| Shape | True ambidextrous shape |
| Scroll wheel | Gaming-grade tactile scroll wheel |
| Sensitivity | On-The-Fly Sensitivity Adjustment |
| Storage | Hybrid on-board and cloud storage (4+1 profiles) |
| Software | Razer Synapse 3 enabled |
| Lighting | Razer Chroma lighting with true 16.8 million customizable color options; inter-device color synchronization |
| Usage modes | Wired and wireless |
| Cable | Speedflex cable for charging and wired use |
| Dock | Razer Mouse charging dock compatible |
| Battery life | Approximately 70 hours (without lighting); depends on usage settings |
| Length | 127 mm / 5.0 in |
| Width | 66 mm / 2.60 in |
| Height | 38 mm / 1.50 in |
| Weight | 74 g / 0.163 lbs (excluding cable) |
What You Need
The mouse needs a PC with a free USB port. To use Razer Synapse 3 you need Windows 7 64-bit (or higher) and an internet connection.
Charging and Power
Charging the Mouse
Plug the charging cable from your computer’s USB port into the Viper Ultimate. This connection also acts as the wired mode.
For best results, fully charge the mouse before using it for the first time. A depleted battery takes approximately 4 hours to charge fully. If the mouse has not been used for an extended period, you may need to recharge it before use.
The mouse needs a USB connection that can supply enough power to charge the battery. Charging can be affected if you connect it to a non-powered USB hub or to the non-powered USB ports found on some keyboards and other peripherals. When in doubt, connect the mouse directly to a USB port on your computer.
Low Power Indicator
When battery power falls below 5%, the Triple-Headed Snake logo blinks red twice in repeated intervals. The sequence repeats until the battery is drained or you connect the mouse to the PC with the charging cable.
Connecting the Mouse
Using the USB Wireless Dongle
- Remove the compartment cover from the mouse.
- Remove the USB wireless dongle from the mouse.
- Reattach the compartment cover and make sure it is securely fastened.
- Insert the USB wireless dongle into your computer’s USB port.
- Switch on the mouse using the power on/off switch.
After step 5, the mouse is ready for use in wireless mode.
Using the Charging Dock
- Plug the charging cable from your computer’s USB port into the charging dock.
- Insert the USB wireless dongle.
The dock replenishes the mouse’s battery and extends the reach of the wireless dongle. If you connect to Razer Synapse and place the mouse on the dock, you can also view the mouse’s current battery status. The guide’s dock illustrations show these battery levels:
| Color | Battery percentage | Effect |
|---|---|---|
| Red | Below 25% | Breathing |
| Orange | 26%–50% | Breathing |
| Yellow | 51%–75% | Breathing |
| Green | 76%–99% | Breathing |
| Green | 100% | Static |
Using the Wireless USB Dongle Adapter
The USB dongle adapter gives you easier access to the dongle and extends its reach. Connect the charging cable between your computer’s USB port and the adapter, then plug the dongle into the adapter, as shown in the guide’s illustration.
Customizing with Razer Synapse 3
Synapse and Mouse Tabs
The Synapse tab is the default tab when you first launch Razer Synapse 3, and its Dashboard subtab gives an overview of your Razer devices, modules and online services. The Mouse tab is the main tab for the Viper Ultimate, where you change button assignment, DPI sensitivity and lighting.
Changes made under the Mouse tab are saved automatically to your system and cloud storage. To store profiles on the mouse’s on-board memory, click the Save button to open the storage slots, then drag and drop the profiles you want to store. The mouse can store up to 5 profiles from Synapse 3, and you can use them even on systems that do not have Synapse 3 installed.
Profiles
A profile stores all of your Razer peripheral settings. By default, the profile name is based on your system’s name. To add, rename, duplicate or delete a profile, press the Miscellaneous button.
Button Assignments
The Customize subtab modifies the mouse’s button assignments. Click the Sidebar button to see all current assignments, or select a button on the Customize tab to jump to it. After selecting a button, you can assign one of these functions:
| Function | What it does |
|---|---|
| Default | Returns the button to its original setting |
| Keyboard Function | Turns the button into a keyboard function; optional Turbo mode emulates repeatedly pressing it while the button is held |
| Mouse Function | Substitutes another mouse function (left click, right click, scroll click, double click, mouse button 4 (browser back), mouse button 5 (browser forward), scroll up/down/left/right, repeat scroll up/down); Turbo mode is available for some |
| Sensitivity | Controls DPI from a button (see below) |
| Macro | Executes a prerecorded sequence of keystrokes and button presses with precise timing |
| Switch Profile | Loads a different profile’s button assignments; an on-screen notification appears when you switch |
| Switch Lighting | Switches from the current lighting effect to a custom lighting effect |
| Razer Hypershift | Activates Hypershift mode while the button is held |
| Launch Program | Opens an app or website; search for an app or enter a web address |
| Multimedia | Volume down/up, mute volume, mic volume up/down, mute mic, mute all, play/pause, previous track, next track |
| Windows 8 Charms | Assigns a Windows 8 shortcut command |
| Windows Shortcuts | Assigns a Windows operating system shortcut command |
| Text Function | Types prewritten text when the button is pressed, with full Unicode support |
| Disable | Makes the button unusable, for example if it interferes with your gaming |
The Sensitivity function offers these options:
- Sensitivity Clutch: Changes to a predefined DPI while the button is held; releasing it returns to the previous sensitivity.
- Sensitivity Stage Up / Down: Raises or lowers the current sensitivity by one stage.
- On-The-Fly Sensitivity: Press the button and move the scroll wheel up or down to raise or lower the current DPI.
- Cycle Up Sensitivity Stages: Raises the stage by one and returns to stage 1 after the highest stage.
- Cycle Down Sensitivity Stages: Lowers the stage by one and returns to the highest stage after stage 1.
Mouse Use and Hypershift
Mouse Use switches the orientation of your primary and secondary mouse functions for left-handed or right-handed users. Hypershift is a secondary set of button assignments that is active while the Hypershift key is held down. By default, the Hypershift key is the FN key of a Razer Synapse 3 supported keyboard, and you can also assign any mouse button as the Hypershift key.
Performance Settings
The Performance subtab controls sensitivity, acceleration and polling rate.
- Sensitivity: A higher DPI makes the cursor travel farther for the same mouse movement.
- Enable X-Y Sensitivity: By default the horizontal and vertical axes share one value. Select this option to set a different value for each axis. It can be used together with sensitivity stages.
- Sensitivity Stages: Create up to 5 preset sensitivity values to cycle through with the stage up/down controls.
- Polling Rate: Choose 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms) from the dropdown. A higher rate means the computer receives mouse status updates more often.
- Mouse Properties: Opens the Windows Mouse Properties for operating system settings that can affect the mouse.
Lighting Settings
On the Lighting subtab, toggle Brightness to turn lighting off or use the slider to raise or lower luminance. Switch Off Lighting is a power-saving tool that can disable lighting when your system’s display turns off and/or power the mouse down automatically after it has been idle for a set time.
| Quick effect | Behavior | Setup |
|---|---|---|
| Audio Meter | LEDs light up according to the audio level, with a default spectrum of colors | Select a Color Boost level |
| Breathing | Lighting fades in and out of the selected color(s) | Select up to 2 colors or randomize |
| Reactive | LEDs light up when you click any mouse button | Select the color and how long the LED stays lit |
| Spectrum Cycling | LEDs cycle between 16.8 million colors indefinitely | No further customization required |
| Static | LEDs stay lit in the selected color | Select a color |
To synchronize quick effects with other supported Razer Chroma-enabled devices, click the Chroma Sync button. For Advanced Effects, press the Chroma Studio button to build your own Chroma effect.
Calibration
The Calibration subtab optimizes the sensor for your surface. Smart Tracking sets the distance at which the sensor stops tracking when lifted, to avoid unwanted cursor movement. Select Enable Asymmetric Cut-Off to set different lift-off and landing distances. For Manual Calibration, click Add A Surface, then choose a Razer mouse mat from the list or add your own.
Power Settings
The Power subtab manages the mouse’s energy use while running on battery. You can set the mouse to enter sleep mode after it has been idle for a chosen number of minutes, and set a battery percentage below which it enters Low Power Mode when wireless.
Profiles Tab and Linked Games
On the Profiles tab, the Devices subtab shows which Razer device uses each profile. Click the add button to create a profile for the selected device, and use the Miscellaneous button to rename, duplicate or delete one. The Link Games option activates a profile automatically when you run an application. The Linked Games subtab lets you add games, view peripherals linked to games and search added games, and sort by alphabetical order, last played or most played. Added games stay listed even if not linked to a Razer device.
Settings Window
Click the settings button in Razer Synapse 3 to open the Settings window. The General tab sets display language and start-up behavior and lets you view the master guide of connected Razer devices. The Reset tab performs a factory reset, which erases all profiles stored in the selected device’s on-board memory. On devices without on-board memory, a factory reset only creates a new Synapse 3 profile with default settings. The About tab shows software information and terms-of-use links, checks for software updates and links to Razer’s social communities.
Safety, Care and Comfort
Safety Guidelines
- If you have trouble operating the mouse and troubleshooting does not work, unplug it and contact the Razer hotline or go to support.razer.com. Do not attempt to service or fix the device yourself at any time.
- Do not take the device apart. Doing so voids your warranty. Do not attempt to operate it under abnormal current loads.
- Keep the device away from liquid, humidity and moisture.
- Operate the device only within 0°C (32°F) to 40°C (104°F). If the temperature goes outside this range, unplug and/or switch off the device and let the temperature stabilize.
Cleaning and Surface Care
Once a month, unplug the mouse from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
For the best movement and control, Razer recommends a premium Razer mouse mat. The sensor is tuned and optimized for Razer mouse mats, and Razer states it has been tested to track best on them. Some surfaces cause undue wear on the mouse feet, which then need constant care and eventual replacement.
Comfort Guidelines
Long periods of repetitive motion, poor peripheral positioning, incorrect body position and poor habits may be associated with physical discomfort and injury to nerves, tendons and muscles. To reduce the risk:
- Position your keyboard and monitor directly in front of you with the mouse next to the keyboard. Keep your elbows at your sides, not too far away, and the keyboard within easy reach.
- Adjust your chair and table height so the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, your posture straight and your shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. For repeated tasks, avoid bending, extending or twisting your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
- Customize the keys on your keyboard to suit your style of gaming and minimize repetitive or awkward motions.
- Do not sit in one position all day. Get up, step away from your desk and stretch your arms, shoulders, neck and legs.
If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back, consult a qualified medical doctor immediately.
Warranty, Registration and Support
The Razer Viper Ultimate comes with a 2-year limited warranty. Registering at razerid.razer.com unlocks exclusive Razer benefits. The serial number is on the underside of the mouse, in the S/N area marked in the guide’s illustration. For the latest warranty terms, visit razer.com/warranty.
Frequently Asked Questions
How do I connect the Razer Viper Ultimate wirelessly?
Open the compartment cover on the underside, take out the USB wireless dongle, and put the cover back on, making sure it is securely fastened. Insert the dongle into your computer’s USB port, then switch the mouse on with the power on/off switch. The mouse is then ready to use in wireless mode.
How do I charge the Razer Viper Ultimate, and how long does it take?
Plug the charging cable from your computer’s USB port into the mouse. A depleted battery fully charges in approximately 4 hours, and a full charge before first use gives the best results. Connect the cable directly to a USB port on your computer, because a non-powered USB hub or the non-powered USB ports on some keyboards and other peripherals can affect charging. The same cable connection also works as wired mode.
What does it mean when the Viper Ultimate logo blinks red twice?
The battery is below 5%. The Triple-Headed Snake logo blinks red twice at repeated intervals until the battery is drained or you connect the mouse to the PC with the charging cable. Plug it in to charge.
What does the Razer Mouse charging dock do?
It recharges the mouse’s battery and extends the reach of your USB wireless dongle. Plug the charging cable from your computer’s USB port into the dock and insert the dongle. If you connect to Razer Synapse and place the mouse on the dock, you can also view the current battery status. The dock and USB dongle adapter are subject to change based on the current retail version, so check what came in your box.
How do I change the DPI, and what do the indicator colors mean?
Press the DPI cycle up button on the underside to step through the DPI stages. The DPI indicator shows the active stage: red for 800, green for 1800 (default), blue for 4000, cyan for 9000 and yellow for 20000. You can customize the stages, up to 5, in Razer Synapse 3 under Mouse > Performance, and assign Sensitivity Clutch or On-The-Fly Sensitivity to another button on the Customize subtab.
How long does the battery last, and how can I save power?
Battery life is approximately 70 hours without lighting, and it depends on your usage settings. In Synapse 3, the Lighting subtab can turn lighting off when your display turns off or after the mouse is idle, and the Power subtab lets you set an idle time before sleep mode and a battery level at which the mouse enters Low Power Mode when wireless.
How do I store my settings on the mouse?
Open the Mouse tab in Razer Synapse 3, click the Save button to open the on-board memory storage slots, then drag and drop the profiles you want to store. The mouse holds up to 5 profiles from Synapse 3, and you can use them even on a computer that doesn’t have Synapse 3 installed.
How do I reassign a button or use Hypershift?
In Synapse 3, open Mouse > Customize and select the button to change. You can assign a keyboard function, another mouse function, a sensitivity control, a macro, a profile or lighting switch, Hypershift, a program or website launcher, multimedia controls, Windows shortcuts, typed text or Disable. To use Hypershift, set a button to Razer Hypershift; the second set of assignments is active only while that key is held. Its default key is FN on a Synapse 3 supported keyboard. Mouse Use also lets you swap primary and secondary mouse functions for left-handed use.
How do I change the polling rate?
Open Synapse 3, go to Mouse > Performance, and pick a value from the Polling Rate dropdown: 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms). A higher rate means the computer receives mouse updates more often.
How do I stop the cursor from moving when I lift the mouse?
In Synapse 3, go to Mouse > Calibration and use Smart Tracking to set the distance at which the sensor stops tracking after you lift the mouse. Select Enable Asymmetric Cut-Off for separate lift-off and landing distances. For Manual Calibration, click Add A Surface and choose a Razer mouse mat or add your own.
How should I clean the Razer Viper Ultimate, and what temperatures can it handle?
Once a month, unplug the mouse and wipe it with a soft cloth or cotton swab. Do not use soap or harsh cleaning agents, and keep it away from liquid, humidity and moisture. Use it only between 0°C (32°F) and 40°C (104°F); if it goes outside that range, unplug or switch it off until the temperature stabilizes.
