If your Galaxy phone won’t pair with a Bluetooth device or keeps dropping the connection, work through Samsung’s troubleshooting steps in order: confirm the accessory is in pairing mode, forget and re-pair it, restart both devices, update the software, and run Samsung Members diagnostics.
Reset Wi-Fi and Bluetooth settings only if the earlier steps fail, because that reset removes saved connection information.
Menu names and screen layouts vary by model and software version. Samsung’s current guides refer to recent One UI releases, so an older phone may word some options differently.
For example, the Samsung Galaxy A31 SM-A315F manual lists “Reset network settings” under General management > Reset, while Samsung’s newer guide names “Reset Wi-Fi and Bluetooth settings.” If a label doesn’t match, look for the closest option in the same menu.
Match the symptom to the first fix
| What you see | Start with |
|---|---|
| The accessory doesn’t appear in the device list | Step 1: pairing mode, distance, and Bluetooth settings |
| The accessory appears but won’t pair or connect | Step 2: forget and re-pair, then Step 3: restart |
| A paired device won’t reconnect | Step 1: check whether it is connected to another device, then Step 2 |
| The connection drops at random | Step 1: battery and distance, then Step 4: software update |
| A car or hands-free system won’t pair | The car and hands-free section |
| It connects, but there is no sound or call audio | The no sound or call audio section |
| Samsung earbuds or a Samsung watch won’t connect | Step 1: support app check |
Step 1: Check the basics
- Charge both devices. Samsung notes that low battery can affect connectivity.
- Put the accessory in pairing mode. If it isn’t in pairing mode, your Galaxy phone cannot detect it. Pairing steps differ by manufacturer, so check the accessory’s manual.
- Keep both devices close together, with no obstructions or interfering electronics between them. Samsung’s US guide says most Bluetooth devices need to be within 30 feet; the Galaxy A31 manual gives a maximum range of 10 m.
- Make sure Bluetooth is on. Swipe down from the top right of the screen to open Quick settings. The Bluetooth icon glows blue when it is on and is grayed out when it is off.
- Make sure the accessory isn’t already connected to another phone, tablet, or computer. Samsung notes that a Bluetooth device may not connect if it is already connected to another device.
- Check whether the accessory needs a support app. Samsung earbuds and watches connect through the Galaxy Wearable app. For a third-party device, ask the manufacturer whether an app is required.
Galaxy Buds pairing mode
Samsung lists these pairing-mode steps for its own earbuds:
- Galaxy Buds3 and Buds3 Pro: With the earbuds in the open case, press and hold the pairing button on the bottom of the case for more than 3 seconds. The status indicator flashes blue, red, and green.
- Galaxy Buds2 and Buds2 Pro: With the earbuds in the open case, press and hold both earbuds at the same time for more than 3 seconds. The status indicator flashes blue, red, and green.
- Galaxy Buds, Buds+, Buds Live, and Buds Pro: Wear both earbuds, then press and hold the touchpad on both at the same time for more than 3 seconds. A sound plays to confirm pairing mode.
These steps apply only to the models listed. Other accessories use different methods.
Step 2: Pair or re-pair the device
Pair a new device
- Open Settings > Connections > Bluetooth.
- Select the device from the list of available devices.
- Tap Pair and confirm the connection.
When pairing succeeds, the device appears in your paired devices list. ManualsPedia’s Galaxy Fold SM-F900F manual shows the same Settings > Connections > Bluetooth path for that model.
Forget a device and pair it again
Use this when a device that worked before won’t reconnect, or when it is listed but won’t connect.
- Open Settings > Connections > Bluetooth.
- Tap the settings icon next to the device.
- Tap Unpair. Some Samsung guides label this option Forget device.
- Put the accessory back into pairing mode.
- Pair it again using the steps above.
Step 3: Restart both devices
- Restart the accessory. Follow its manual if you are not sure how.
- Swipe down from the top right of your phone to open Quick settings, tap the Power off icon, then tap Restart.
- If the phone freezes or the Restart menu doesn’t appear, press and hold the Side key and Volume down key together for more than 7 seconds until the phone restarts.
After both devices restart, try pairing or connecting again. If your phone asks for your security credentials after restarting, enter them.
Step 4: Update the software
- Open Settings > Software update.
- Tap Check for updates. On some software versions the option is labeled Download and install.
- Follow the on-screen instructions until the phone confirms it is up to date.
Also check whether the accessory has a firmware or software update. For a third-party accessory, contact its manufacturer for update guidance. If no update is available for your phone, continue to the next step.
Step 5: Run Samsung Members Phone diagnostics
Samsung’s Phone diagnostics is available only on Galaxy devices with the Samsung Members app installed.
- Open Samsung Members and tap Support.
- Tap Get started. You can stop the full scan and run only specific tests.
- Select Bluetooth.
- Follow the on-screen instructions and review the results.
If the test reports a problem, or the issue continues, contact Samsung Support.
Step 6: Check for an app conflict in Safe mode
Safe mode turns off downloaded apps and loads only the original software. If Bluetooth works in Safe mode but not in normal mode, a downloaded app is the likely cause.
- Open the Power menu. Press and hold the Power key, or on a phone with no dedicated Power button, open Quick settings and tap the Power icon.
- Touch and hold Power off until the Safe mode icon appears, then tap Safe mode.
- Confirm that “Safe mode” appears at the bottom of the screen.
- Try connecting your Bluetooth device.
- If it works, uninstall apps you recently installed, one at a time, and test Bluetooth after each removal. In the App drawer, touch and hold an app icon, tap Uninstall, then tap OK.
- To leave Safe mode, open the Power menu, tap Power off, wait for the phone to shut down, then turn it on again.
Step 7: Reset Wi-Fi and Bluetooth settings
Try this only after the earlier steps. Samsung warns that the reset removes saved Bluetooth, Wi-Fi, and other connection information, so you will need to pair your devices again. The Galaxy A31 manual similarly cautions that you may lose registered information.
- Open Settings > General management > Reset.
- Tap Reset Wi-Fi and Bluetooth settings. On older software this option may be labeled Reset network settings.
- Tap Reset settings. Enter your security credentials if prompted, then tap Reset to confirm.
- Pair your Bluetooth devices again.
Samsung’s guide also lists Reset mobile network settings, but that option is for mobile connection problems, not Bluetooth.
Car and hands-free systems
- Search for your phone from the vehicle’s Bluetooth system, rather than searching for the vehicle from your phone, as Samsung advises.
- Make sure the vehicle’s Bluetooth system is in pairing mode.
- Follow the vehicle manufacturer’s pairing instructions. Google’s Android guidance also says to check your car’s manual to see whether pairing starts from the phone or from the car.
- Remove phones you no longer use from the car’s paired-device list, as Google suggests.
- Not every car supports music or calls over Bluetooth. Check your car’s manual.
If it connects but there is no sound or call audio
These checks come from Google’s Android guidance, so option names can differ on a Galaxy phone.
- Check the volume on both the phone and the accessory.
- Make sure other paired devices aren’t playing audio or receiving calls.
- In Bluetooth settings, tap the settings icon next to the device and confirm that media audio and phone (call) audio are turned on.
When to contact support
If the problem continues after these steps, contact Samsung Support or visit a Samsung service center. If only one third-party accessory fails to connect, contact that accessory’s manufacturer. Trying a second Bluetooth device can also help you tell whether the problem is with the phone or with the accessory.
To find the manual for your exact phone model, browse our Mobile Phones manuals.
Frequently Asked Questions
How close should my Galaxy phone be to the Bluetooth device?
Keep the devices close and unobstructed while you troubleshoot. Samsung’s US guide says most Bluetooth devices need to be within 30 feet, and the Galaxy A31 manual states a maximum range of 10 m. Walls, other electronics, and interference can shorten the usable distance.
Will resetting Wi-Fi and Bluetooth settings erase my photos or apps?
Samsung describes this reset as removing saved Bluetooth, Wi-Fi, and other connection information, so devices may need to be paired again. Samsung’s all-data-erased warning applies to a factory data reset, which this guide does not cover.
Why won’t my Galaxy Buds or Galaxy Watch connect like other accessories?
Samsung earbuds and watches connect through the Galaxy Wearable app. If the accessory still won’t connect after you put it in pairing mode, check that the app is installed and follow the steps in this guide.
Do these steps apply to the Galaxy A31?
They follow Samsung’s guidance for Galaxy phones and tablets, but menu labels vary by model and software version. The Galaxy A31 manual describes the same core checks: confirm the other device is ready, stay within range, turn Bluetooth off and on under Settings > Connections, and reset network settings if needed.