Philips Norelco Beard Trimmer 7000 Series BT7670

Beard Trimmer 7000 Series BT7670

Read the Philips Norelco Beard Trimmer 7000 Series BT7670 manual for charging, guards, fading, trimming, cleaning, storage and safety (BT5775, BT5785).
Supporting Models: BT5775, BT5785, BT7670
English, Spanish

Read The User Manual (PDF) Online

View the original document directly below. For safety-critical procedures, follow the manufacturer’s instructions for your exact model.

Philips Norelco Beard Trimmer 7000 Series BT7670

The Philips Norelco Beard Trimmer 7000 Series BT7670 trims facial hair to the length you choose. It is waterproof, so you can use it in the bath or shower and rinse it under the tap. It runs only on its battery and cannot be used while plugged in. Do not use it on body or scalp hair.

The BT7670 comes with the most attachments of the three models covered here:

  • An extra-wide 41 mm cutting element, which only the BT7670 includes.
  • A standard 32 mm cutting element and a precision trimmer.
  • Two adjustable trimming guards, covering 0.4 mm to 10 mm and 10.4 mm to 20 mm.
  • Two fading guards.
  • A hair collector and a charging stand.
  • A USB cable, a storage pouch and a cleaning brush.

The BT5785 has the same set except for the extra-wide element. The BT5775 has no fading guards and no charging stand.

Models Covered and What Each Includes

This guide covers BT5775, BT5785 and BT7670. You can find your model number on the back of the product. The full model number (for example, BT1234/56) is on the bottom of the packaging, your receipt or your order confirmation.

ItemBT5775BT5785BT7670
Cutting element (32 mm)YesYesYes
Extra-wide cutting element (41 mm)NoNoYes
Precision trimmerYesYesYes
Hair collectorYesYesYes
Adjustable trimming guards (0.4–10 mm and 10.4–20 mm)YesYesYes
Fading guardsNoYesYes
Charging standNoYesYes
Cordless run time after 60 minutes of chargingUp to 100 minutesUp to 100 minutesUp to 120 minutes

The USB cable, storage pouch and brush are listed for the product in general, and the power source is not included. The hair collector is marked only on the cutting element (32 mm) and the adjustable guards, which is why the table lists it for all three models.

Parts and Controls

  • Extra-wide cutting element (41 mm): BT7670 only.
  • Precision trimmer: for fine lines and contours.
  • Cutting element (32 mm): the standard cutting head.
  • Hair collector: optional, catches some of the cut hair.
  • Hair length setting wheel: selects the length on an adjustable guard.
  • On/off button: press once to switch on, press once again to switch off.
  • Battery status indicator: shows charge state.
  • Socket for small plug: in the bottom of the product.
  • USB cable and small plug: used to charge.
  • Charging stand: BT5785 and BT7670 only.
  • Adjustable trimming guards: 0.4 mm to 10 mm (1/64 in. to 25/64 in.) and 10.4 mm to 20 mm (13/32 in. to 25/32 in.).
  • Fading guards: BT5785 and BT7670 only. One covers 1 mm to 5 mm (3/64 in. to 13/64 in.) and the other covers 5 mm to 1 mm (13/64 in. to 3/64 in.).

The storage pouch and brush are supplied with the product.

Key Specifications

SpecificationValue
Cutting element widths32 mm standard; 41 mm extra-wide (BT7670 only)
Adjustable guard ranges0.4–10 mm (1/64–25/64 in.); 10.4–20 mm (13/32–25/32 in.)
Fading guard ranges1–5 mm (3/64–13/64 in.); 5–1 mm (13/64–3/64 in.) (BT5785, BT7670)
Close trim without a guardAbout 1/32 in. (0.5 mm)
Charging power sourceCertified USB power source, 5 V, ≥ 1 A
Charging in a moist environment (for example, a bathroom)IPX4 (splash-proof) power source only
Cordless run time after 60 minutes of chargingUp to 100 minutes (BT5775, BT5785); up to 120 minutes (BT7670)
Quick chargeAbout 5 minutes gives enough power for one trimming session
Operating, charging and storage temperature50 °F to 95 °F (10 °C to 35 °C)
Battery typeRechargeable lithium-ion

Safety Information You Should Know

Read all instructions before first use, and keep them. The most important points are below.

Electrical and Water Safety

  • Charge only with a certified USB power source rated 5 V, ≥ 1 A. A non-certified source may cause hazards or serious injuries.
  • In a moist environment such as a bathroom, use only an IPX4 (splash-proof) power source. A suitable source, such as the Philips HQ87, is available through www.philips.com/support. For help choosing one, call Philips support at 1-800-243-3050.
  • Keep the USB cable, USB power source and charging stand dry.
  • Do not reach for a corded product that has fallen into water. Unplug it from the power outlet immediately.
  • Do not place or store the product where it can fall or be pulled into a tub or sink. Do not place or drop it into water or other liquid.
  • The product does not work while connected to the power outlet. Except when charging, always unplug it.
  • Remove the USB power source from the outlet and the product before cleaning the product with water.
  • Plug the USB power source directly into a wall outlet and do not use an extension cord.
  • Do not use the USB power source in or near an outlet that holds an electric air freshener.
  • Attach the USB cable to the USB power source and to the product first, then plug the power source into the outlet. To disconnect, set all controls to off and then remove the power source from the outlet.
  • Unplug the USB power source before plugging the product in or unplugging it.

Use Restrictions

  • The product is not intended for people (including children) with reduced physical, sensory or mental capabilities, or without experience and knowledge, unless they are supervised or instructed by a person responsible for their safety. Supervise children so they do not play with it.
  • Use it only for its intended household use. Do not use attachments that Philips North America LLC does not recommend, and use only original Philips accessories or consumables.
  • Do not use the product outdoors, where aerosol (spray) products are being used, or where oxygen is being administered.
  • Never drop or insert any object into any opening.
  • Only one person should use the product, for hygiene.
  • Check the product and all accessories before every use. Do not use the product or any accessory if it is damaged, and replace a damaged part with one of the original type.
  • Never operate the product if the USB power source is damaged, if it is not working properly, after it has been dropped or damaged, or after the product or power source has been dropped into water. For assistance, call 1-800-243-3050.

Battery Safety

  • Charge, use and store the product between 50 °F / 10 °C and 95 °F / 35 °C. Charging or using it outside this range adversely affects battery lifespan.
  • If the product is exposed to a major change in temperature, pressure or humidity, let it acclimatize for 30 minutes before use.
  • Keep the product and batteries away from fire, direct sunlight and high temperatures. Do not heat batteries above 100 °C (212 °F) or incinerate them.
  • Do not put the product or batteries in a microwave oven or on an induction cooker.
  • Do not open, modify, pierce, damage or dismantle the product or battery. Do not short-circuit, overcharge or reverse charge batteries.
  • If the product becomes abnormally hot or smelly, changes color, or takes longer than usual to charge, stop using and charging it and contact Philips.
  • If batteries are damaged or leaking, avoid contact with skin or eyes. If contact happens, rinse well with water immediately and seek medical care.
  • Keep hands, product and batteries dry when handling batteries.
  • After removal, do not let battery terminals touch metal objects such as coins, hairpins or rings, and do not wrap batteries in aluminum foil. Tape the terminals or put the batteries in a plastic bag before discarding them.

Charging the Trimmer

Charge the trimmer fully before first use, and again when the battery status indicator shows the battery is almost empty.

Battery Status Indicator

Battery statusIndicator
Almost emptyFlashing orange light
ChargingFlashing white light
Fully chargedSolid white light

About 60 seconds after the battery is fully charged, the indicator switches off automatically.

Charging with a USB Power Source

  1. Make sure the product is switched off.
  2. Insert the small plug of the USB cable into the socket in the bottom of the product.
  3. Insert the USB plug into the USB power source (not included).
  4. Insert the USB power source into the power outlet.
  5. After charging, remove the USB power source from the outlet and pull the small plug out of the product.

Charging with the Charging Stand (BT5785, BT7670)

  1. Make sure the product is switched off.
  2. Insert the small plug into the charging stand.
  3. Insert the USB plug into the USB power source (not included).
  4. Insert the USB power source into the power outlet.
  5. Put the product in the charging stand.
  6. After charging, take the product out of the stand, remove the power source from the outlet, pull the USB plug out of the power source, and then pull the small plug out of the charging stand.

Quick Charge and Run Time

After about 5 minutes of charging, the product has enough power for one trimming session. After 60 minutes of charging, it runs cordless for up to 100 minutes (BT5775, BT5785) or 120 minutes (BT7670).

Changing Attachments

Switch the trimmer off before attaching or detaching anything.

Hair Collector

If you use the hair collector together with an adjustable guard, attach the hair collector first and then the guard. To detach, remove the guard first and then the hair collector.

  1. To attach, align the top wings of the hair collector with the top of the handle and press down until both sides click into place.
  2. To detach, hold your hand around the hair collector so it cannot fall, unhook one of its wings with your thumb, and lift it off the handle. Hold the product over a bin so the hair does not spill.

Adjustable Trimming Guards

  1. To attach, slide the guard legs straight into the guiding grooves of the product until the guard clicks into place.
  2. To detach, hold the guard on both sides and gently pull it upward off the product.

Fading Guards (BT5785, BT7670)

  1. To attach, slide the front part of the guard onto the teeth and press the plastic notch at the back of the guard downward until it clicks into place.
  2. To detach, carefully push the back part of the guard off the product and then slide it off the cutting element.

Cutting Elements

  1. To detach a cutting element, place your thumb below its teeth and gently push upward until it comes off the handle.
  2. To attach one, insert the plastic notch at its back into the guiding slot in the handle, then gently press the teeth downward until it clicks into place.

Basic Operation and Trimming Tips

Press the on/off button once to switch the trimmer on, and press it once again to switch it off.

  • On your first trim, use a guard at its maximum length setting to get used to the product.
  • Hair grows in different directions, so try trimming upward, downward and across. The manual notes that practice gives the best results.
  • Make smooth, gentle movements, and keep the surface of the guard in contact with your skin.
  • When using the hair collector, hold the product upward so caught hair does not spill.
  • If too much hair builds up on the product, remove it before or during use for the best results (see Cleaning).

Using the Hair Collector

The hair collector is optional and makes cleanup easier. It catches some, but not all, cut hair, so some hair will still fall.

AttachmentWorks with hair collector
Cutting element (32 mm)Yes
Adjustable trimming guardsYes
Extra-wide cutting element (41 mm)No
Fading guardsNo
Precision trimmerNo

Trimming Modes and Techniques

Trimming Without a Guard

Use this mode to trim close to the skin, to a length of about 1/32 in. (0.5 mm). You can use the hair collector or not.

  1. Attach the hair collector (optional).
  2. Switch the trimmer on.
  3. Place the flat side of the cutting element against your skin and make strokes against the direction of hair growth.
  4. Switch off and clean the product after each use.

Trimming with Adjustable Trimming Guards

This mode is for trimming your beard and mustache in your preferred style, with or without the hair collector. Two guards are supplied, covering 0.4 mm to 10 mm (1/64 in. to 25/64 in.) and 10.4 mm to 20 mm (13/32 in. to 25/32 in.).

  1. Attach the hair collector (optional).
  2. Attach the adjustable guard to the product.
  3. Turn the hair length setting wheel to the length you want. The setting matches the hair length remaining after trimming, and the selected length shows in the center of the wheel.
  4. Switch the trimmer on.
  5. Move the guard against the direction of hair growth, keeping the guard’s surface in contact with the skin.
  6. Switch off and clean the product after each use.

Edging Without the Hair Collector

Use the product with no guard and no hair collector to trim edges and single hairs.

  1. Detach any guard and the hair collector.
  2. Switch the trimmer on.
  3. Hold the cutting element perpendicular to the skin and make well-controlled movements, touching the hair lightly.
  4. Switch off and clean the product after each use.

Faded Beard Line with Fading Guards (BT5785, BT7670)

Use the cutting element with a fading guard, without the hair collector. Two fading guards are supplied, and each trims one side of the face.

  1. Attach one fading guard.
  2. Place the trimmer on your face close to the ear, so the short teeth of the guard are higher and the long teeth are lower.
  3. Switch the trimmer on.
  4. Move the trimmer once in a straight line from the ear to the corner of your mouth.
  5. Attach the other fading guard and repeat on the other side of your face.
  6. Gently shake the hairs off the product between strokes so hair does not collect between the cutting element and the guard.
  7. Switch off and clean the product after each use.

Contouring with the Extra-Wide Cutting Element (BT7670)

Use the 41 mm element without the hair collector to edge and contour your beard line.

  1. Detach the current cutting element.
  2. Attach the extra-wide cutting element.
  3. Place it at the edge of your beard with the blade perpendicular to the skin.
  4. Switch the trimmer on.
  5. Make slow upward or downward strokes to cut unwanted hairs.
  6. Switch off and clean the product after each use.

Fine Lines with the Precision Trimmer

Use the precision trimmer without the hair collector for fine lines and contours close to the skin, to a length of 1/32 in. (0.5 mm).

  1. Detach the cutting element.
  2. Attach the precision trimmer.
  3. Switch the trimmer on.
  4. Hold it perpendicular to the skin and move it upward or downward with gentle pressure.
  5. Switch off and clean the product after each use.

Cleaning and Care

Clean the trimmer after each use. Switch it off first, and use only cold or lukewarm water.

  • Never use scouring pads, abrasive cleaning agents, or aggressive liquids such as gasoline or acetone.
  • Never dry the cutting element with a towel or tissue. It can catch in the teeth and cause damage.

Cleaning Steps

  1. Make sure the product is switched off and removed from the charging stand or power outlet.
  2. Detach any guard first, then the hair collector if attached, holding the product over a bin or sink.
  3. Empty the hair collector into a bin. Use the cleaning brush to remove all hair from the collector and the guard.
  4. Clean the whole handle under the tap or wipe it with a dry or moist cloth.
  5. Detach the cutting element and clean it with the brush.
  6. Rinse all the attachments under the tap.
  7. Carefully shake off excess water and let all parts air-dry completely.

Storage

  • Switch the product off, and remove the USB power source from the outlet and from the product.
  • Do not wrap the USB cable around the product when storing.
  • Store the product, USB power source and all accessories in the supplied pouch, in a safe, dry place where it will not be crushed, banged or damaged.
  • Make sure the product and accessories are dry before putting them in the pouch.
  • Do not store the product where it can fall or be pulled into a tub, sink, water or other liquid.

Troubleshooting and Service

The manual has no error-code list or step-by-step fault table, so the manufacturer-approved guidance comes down to a few points.

  • If the product becomes abnormally hot or smelly, changes color, or takes longer than usual to charge, stop using and charging it and contact Philips.
  • If the product is damaged, has been dropped, is not working properly, or has a damaged USB power source, do not operate it. Call 1-800-243-3050.
  • The product has no other user-serviceable parts. For help, call 1-800-243-3050 toll free or visit www.philips.com/support.
  • You can register your product at www.norelco.com/register.

Disposal and Recycling

The product contains a rechargeable lithium-ion battery that must be disposed of properly. Contact your local town or city officials for battery disposal information. You can also call 1-800-822-8837 or visit www.call2recycle.org for battery drop-off locations. For general recycling information, contact your local waste management facilities or visit www.recycle.philips.com.

Warranty and Money-Back Guarantee

Five-Year Warranty

Philips North America LLC warrants this new product, except the blade and guards, against defects in materials or workmanship for five years from the date of purchase. It agrees to repair or replace any defective product without charge. The warranty does not cover damage from accident, misuse or abuse, lack of reasonable care, attachments not provided with the product, lost parts, or use with any voltage or batteries other than those specified. Philips assumes no responsibility for special, incidental or consequential damages, and some states do not allow that exclusion, so it may not apply to you. For warranty service, go to www.philips.com/support. Damage during shipment is not covered, and Philips suggests returning shipments by insured mail, insurance prepaid.

45-Day Money-Back Guarantee

If you are not fully satisfied, you can send the product back for a full refund of the purchase price.

  • Ship it prepaid by insured mail with the original sales receipt showing the price and purchase date.
  • It must be postmarked no later than 45 days after purchase.
  • Refunds cannot exceed the suggested retail price.
  • Start at www.PhilipsMoneyBack.com, which uses a 3-step process.
  • The refund check arrives 6 to 8 weeks after Philips receives the returned product.

Frequently Asked Questions

Which models does this guide cover, and how do they differ?

It covers the BT5775, BT5785 and BT7670. All three have the 32 mm cutting element, a precision trimmer, a hair collector and two adjustable trimming guards. The BT5785 and BT7670 also include two fading guards and a charging stand. The BT7670 alone adds the extra-wide 41 mm cutting element, and it runs up to 120 minutes after a 60-minute charge, against up to 100 minutes for the other two.

How do I charge the trimmer for the first time?

Switch the trimmer off and plug the small end of the USB cable into the socket in the bottom of the handle. Then connect the USB end to a certified 5 V, ≥ 1 A USB power source, which is not included, and plug that source into the wall. Charge the trimmer fully before first use. A solid white light means it is fully charged. Afterward, unplug the power source from the wall and remove the small plug from the trimmer.

What do the battery indicator lights mean?

A flashing orange light means the battery is almost empty. A flashing white light means it is charging, and a solid white light means it is fully charged. About 60 seconds after a full charge, the indicator switches off by itself, so a dark indicator right after charging is normal.

How long does the battery last, and is there a quick charge?

After 60 minutes of charging, the BT5775 and BT5785 run cordless for up to 100 minutes. The BT7670 runs up to 120 minutes. If you are short on time, about 5 minutes of charging gives enough power for one trimming session. Charging or using the trimmer below 50 °F (10 °C) or above 95 °F (35 °C) shortens battery life.

Can I use the trimmer while it is plugged in?

No. The product does not work while it is connected to the power outlet, which is part of what makes it safe in wet areas. Plug it in only to charge, and always unplug it from the outlet when you are not charging.

Can I use it in the shower and rinse it under the tap?

Yes. The trimmer is waterproof and suitable for the bath or shower, and you can clean it under the tap. Use only cold or lukewarm water. The USB cable, power source and charging stand are not waterproof and must stay dry. When charging in a moist area such as a bathroom, use only an IPX4 (splash-proof) power source.

Which attachments work with the hair collector?

The hair collector works with the 32 mm cutting element used alone, or together with an adjustable trimming guard. It does not work with the extra-wide 41 mm element, the fading guards or the precision trimmer. It catches some but not all cut hair, so some will still fall. With an adjustable guard, attach the collector first and the guard second.

How do I set the hair length?

Attach one of the adjustable guards and turn the hair length setting wheel until the number you want shows in the center. That number is the length your hair will be after trimming. One guard covers 0.4 mm to 10 mm (1/64 in. to 25/64 in.) and the other covers 10.4 mm to 20 mm (13/32 in. to 25/32 in.). On your first trim, start at the maximum length setting to get used to the trimmer.

How do I create a faded beard line?

Use a fading guard on the cutting element without the hair collector. The BT5785 and BT7670 include two fading guards, one for each side of the face. Place the trimmer near your ear with the short teeth of the guard higher and the long teeth lower. Make one straight stroke from the ear to the corner of your mouth. Then swap to the second guard and repeat on the other side. Shake the hair off between strokes so it does not collect behind the guard.

What is the extra-wide cutting element for?

It is for contouring and edging your beard line, and it comes only with the BT7670. Swap it in for the standard cutting element, hold the blade perpendicular to your skin at the edge of your beard, and make slow upward or downward strokes. Do not use the hair collector with it.

How do I clean the trimmer after each use?

Switch it off and take it off the charger or power outlet. Remove any guard first, then the hair collector. Empty the collector and brush the hair out of it and the guard. Wipe or rinse the handle, detach the cutting element and brush it clean, then rinse all the attachments under the tap with cold or lukewarm water. Shake off the excess and let everything air-dry completely. Never dry the cutting element with a towel or tissue, and never use scouring pads, abrasive cleaners, gasoline or acetone.

What should I do if the trimmer gets hot, smells, or charges slowly?

Stop using and charging it right away and contact Philips at 1-800-243-3050 or www.philips.com/support. The same applies if the trimmer changes color or takes longer than usual to charge. Do not use a trimmer that has been dropped, is damaged, or is not working properly. The manual also says it has no other user-serviceable parts.

Found something that needs correcting?

If a model number, instruction, specification, or document link looks incorrect, please send us the page URL and relevant details.