Philips Norelco All-in-One Trimmer 9000 Series

All-in-One Trimmer MG9570

Philips Norelco All-in-One Trimmer MG9570 manual: charging, guard sizes, trimming steps, cleaning, safety notes and warranty for 9000 Series models.
Supporting Models: MG9570, MG9575, MG9580, MG9585
English, Spanish

Read The User Manual (PDF) Online

View the original document directly below. For safety-critical procedures, follow the manufacturer’s instructions for your exact model.

Philips Norelco All-in-One Trimmer MG9570

The Philips Norelco All-in-One Trimmer is a cordless, waterproof grooming tool built around one handle and several snap-on cutting elements. Depending on the attachment, it trims beard and scalp hair (full-size and extra-wide trimmers), shapes fine lines (precision trimmer), tidies eyebrows and sideburns (eyebrow guard), grooms the body (body guards and body groomer), and trims nose and ear hair (nose and ear hair trimmer). Models MG9575, MG9580 and MG9585 also include a precision shaver for detailing edges. Guard length settings run from 0.5 mm (Skin Protect guard) up to 20 mm (adjustable beard and hair guard, models MG9580 and MG9585 only). The built-in rechargeable lithium-ion battery runs for up to 5 hours (MG9570) or up to 6 hours (MG9575, MG9580, MG9585) after a 3-hour charge, and the product is used without the cord.

Covered Models and What Differs

This manual covers MG9570, MG9575, MG9580 and MG9585. Your full model number (for example, MG1234/56) is on the bottom of the packaging, your receipt or your order confirmation. The model number is also on the back of the product.

ItemMG9570MG9575MG9580MG9585
Precision shaverNoYesYesYes
Stubble guards 1 mm and 2 mmYesNoNoYes
Adjustable guard 9 mm – 13 mmNoNoYesYes
Adjustable guard 16 mm – 20 mmNoNoYesYes
Hair guard 2 mmNoYesYesYes
Charging standNoNoNoYes
Cordless run time after 3-hour chargeUp to 5 hoursUp to 6 hoursUp to 6 hoursUp to 6 hours

The parts list marks the cleaning brush, pouch and styling comb as “not shown” and “only with model MG9570.” Check what came in your box if you own another model.

Parts and Attachments

These are the numbered parts in Fig. 1.

No.PartNotes
1Skin protectorUsed with the body groomer
2Body groomerAlways use with the skin protector
3Precision shaverModels MG9575, MG9580, MG9585 only
4Nose and ear hair trimmer
5Extra-wide hair trimmer
6Precision trimmer
7Travel lock attachment
8Full-size hair trimmer
9On/off button
10Battery status indicator
11Socket for small plug of USB cableBottom of the product
12Charging standModel MG9585 only
13USB cable

Guards and What They Are For

Guards come in different colors depending on their intended use. Choose the guard that suits the part of the body you want to trim. The numbers on the guards show the hair length in millimeters that remains after trimming.

Guard colorIntended useCutting element
BlueSkin Protect guardFull-size hair trimmer
BlackBeard and scalp hairFull-size hair trimmer
Medium grayScalp hairExtra-wide hair trimmer
Light grayEyebrowsFull-size hair trimmer
GreenBodyFull-size hair trimmer

Guard Lengths

No.GuardLengthModels
14Stubble guard1 mm (3/64 in.)MG9570, MG9585
15Stubble guard2 mmMG9570, MG9585
16Precision trimming guard1 mm – 3 mmAll covered models
17Adjustable beard and hair guard3 mm – 7 mm (1/8 in. – 9/32 in.)All covered models
18Adjustable beard and hair guard9 mm – 13 mm (3/8 in. – 1/2 in.)MG9580, MG9585
19Adjustable beard and hair guard16 mm – 20 mm (5/8 in. – 13/16 in.)MG9580, MG9585
20Body guard3 mm (1/8 in.)All covered models
21Body guard5 mm (3/16 in.)All covered models
22Hair guard2 mmMG9575, MG9580, MG9585
23Hair guard4 mm (5/32 in.)All covered models
24Hair guard9 mm (3/8 in.)All covered models
25Hair guard12 mm (15/32 in.)All covered models
26Hair guard16 mm (21/32 in.)All covered models
27, 28Fading hair guards4 mm – 9 mm (5/32 in. – 3/8 in.)All covered models
29Skin Protect guard0.5 mm (1/32 in.)All covered models
30Eyebrow guard6 mm (1/4 in.)All covered models

Important Safety Instructions

Read all instructions before using this product, and keep them for later.

Danger: Reducing the Risk of Electric Shock

  • To charge the product, only use a USB power source on a certified product with output rating 5 V, ≥ 1 A.
  • For safe charging in a moist environment, such as a bathroom, only use an IPX4 (splash-proof) power source. A suitable power source (for example, Philips HQ87) is available through www.philips.com/support. For help finding the correct power source, call Philips support at 1-800-243-3050.
  • Using a non-certified USB power source may cause hazards or serious injuries.
  • Keep the USB cable, the USB power source and the charging stand (if provided) dry.
  • Do not reach for a corded product that has fallen into water. Unplug it immediately from the power outlet.
  • Do not place or store the product where it can fall or be pulled into a tub or sink. Do not place or drop it into water or other liquid.
  • The product does not work while it is connected to the power outlet. Except when charging, always unplug it from the power outlet.
  • Remove the USB power source from the power outlet and from the product before cleaning the product with water.

Warning: Reducing the Risk of Burns, Fire, Electric Shock or Injury

  • This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised so they do not play with the product.
  • Use the product only for its intended household use. Do not use attachments not recommended by Philips North America LLC, and only use original Philips accessories or consumables.
  • Never operate the product if the USB power source is damaged, if the product is not working properly, after it has been dropped or damaged, or after the product or the USB power source has been dropped into water. For assistance, call 1-800-243-3050.
  • Always check cutting units, attachments and accessories before use. Never use the product with a damaged cutting unit, attachment or accessory, as injury may occur.
  • Do not use the product outdoors, where aerosol (spray) products are being used, or where oxygen is being administered.
  • Keep the USB cable and the USB power source away from heated surfaces. Plug the USB power source directly into a power outlet without an extension cord. Do not use it in or near an outlet that contains an electric air freshener.
  • Always attach the USB cable to the USB power source and the product first, then attach the USB power source to the power outlet. Unplug the USB power source before plugging in or unplugging the product.
  • Charge, use and store the product at a temperature between 50 °F / 10 °C and 95 °F / 35 °C.

Battery Safety

  • The batteries may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F) or incinerate them.
  • Keep the product and batteries away from fire, direct sunlight and high temperatures. Do not place them in microwave ovens or on induction cookers.
  • Do not open, modify, pierce, damage or dismantle the product or battery. Do not short-circuit, overcharge or reverse charge batteries.
  • If the product becomes abnormally hot or smelly, changes color, or charging takes longer than usual, stop using and charging it and contact Philips.
  • If batteries are damaged or leaking, avoid contact with skin or eyes. If contact occurs, rinse immediately with plenty of water and seek medical care.
  • When you handle batteries, make sure your hands, the product and the batteries are dry.
  • After battery removal, do not let battery terminals touch metal objects such as coins, hairpins or rings, and do not wrap batteries in aluminum foil. Tape the terminals or put the batteries in a plastic bag before discarding them.

Charging and Battery Status

Charge the product before first use and whenever the battery status indicator shows that the battery is almost empty. After 3 hours of charging, the cordless operating time is up to 5 hours (MG9570) or up to 6 hours (MG9575, MG9580, MG9585).

Because the product is waterproof, it can only be used without the cord.

Charging Conditions

  • Charging or using the product below 50 °F / 10 °C or above 95 °F / 35 °C adversely affects battery lifespan.
  • After a major change in temperature, pressure or humidity, let the product acclimatize for 30 minutes before use.
  • The USB power source is not included. Use only a certified IPX4 power source with output rating 5 V, ≥ 1 A.

Charging With a USB Power Source

  1. Make sure the product is switched off.
  2. Insert the small plug of the USB cable into the socket in the bottom of the product (Fig. 2).
  3. Insert the USB plug into the USB power source (not included) (Fig. 4).
  4. Insert the USB power source into the power outlet (Fig. 5).
  5. After charging, remove the USB power source from the power outlet and pull the small plug out of the product.

Charging With the Charging Stand (MG9585 Only)

  1. Make sure the product is switched off.
  2. Insert the small plug into the charging stand (Fig. 3).
  3. Insert the USB plug into the USB power source (not included) (Fig. 4).
  4. Insert the USB power source into the power outlet (Fig. 5).
  5. Put the product in the charging stand (Fig. 6).
  6. After charging, take the product out of the stand, remove the power source from the power outlet, pull the USB plug out of the power source, and then pull the small plug out of the charging stand.

Quick Charge

After approximately 5 minutes of charging, the product has enough power for one trimming session.

Battery Status Indicator

Battery statusIndicator
Almost emptyFlashing orange light
ChargingFlashing white light
Fully chargedSolid white light

About 30 minutes after the battery is fully charged, the indicator switches off automatically.

Getting Ready to Trim

Check the product and all accessories before each use. Do not use the product or any accessory if it is damaged. Replace a damaged part with one of the original type. For hygiene, only one person should use the product.

Trimming Tips

  • The first time you trim, start with the guard set to the maximum trimming length to get familiar with the product.
  • Hair does not all grow in the same direction, so try different trimming directions (upwards, downwards or across).
  • Make smooth, gentle movements and keep the surface of the guard in contact with your skin.
  • For best results, use the product on clean, dry hair, because wet hair tends to stick to the body.
  • If too much hair builds up on the product, remove it before or during use for better results (see the cleaning section below).

Switching the Product On and Off

Press the on/off button once to switch the product on or off (Fig. 12). Switch the product off before removing or attaching attachments and before cleaning.

Detaching and Attaching Cutting Elements

  1. To detach a cutting element, place your thumb below its teeth and gently push upwards until it comes off the handle (Fig. 7).
  2. To attach a cutting element, insert the plastic notch at the back of the cutting element into the guiding slot in the handle. Then gently press the teeth downwards until it clicks into place (Fig. 8).

Detaching the Nose and Ear Hair Trimmer

Place your finger on the recess at the back of the attachment and push the attachment off the handle (Fig. 9). Use your other hand to keep the attachment from dropping on the floor.

Attaching and Detaching Guards

  1. To attach any guard to a cutting element, slide the front part of the guard onto the teeth, then press the plastic notch at the back of the guard downwards until it clicks into place (Fig. 10).
  2. To detach a guard, carefully push its back part off the product, then slide it off the cutting element (Fig. 11).

Trimming Your Beard

Always comb your beard or mustache with a fine comb before you start.

Full-Size Hair Trimmer Without a Guard

Use the full-size hair trimmer without a guard to trim hair close to the skin (to 1/32 in. / 0.5 mm) or to create clean lines around your beard, neck and sideburns.

  1. To trim close to the skin, place the flat side of the cutting element against your skin and make strokes against the direction of hair growth (Fig. 13).
  2. For contouring, hold the cutting element perpendicular to the skin and move it upwards or downwards with gentle pressure (Fig. 14).

Skin Protect Guard

Attach the Skin Protect guard to the full-size hair trimmer to trim your beard close to the skin (to 1/32 in. / 0.5 mm) with extra protection for the skin.

Beard Guards

Attach a black beard guard to the full-size hair trimmer to trim your beard and mustache evenly to the length you want.

  1. Attach a beard guard to the full-size hair trimmer.
  2. Move the guard against the direction of hair growth (Fig. 13). Keep the surface of the guard in contact with the skin.

Trimming Beard and Head Hair

Precision Trimming Guard

Attach the black precision trimming guard to the full-size hair trimmer to trim beard or hair to a short length from 1 mm to 3 mm.

  1. Attach the precision trimming guard to the full-size hair trimmer.
  2. Scroll the wheel on the guard to set the length (Fig. 15).
  3. Move the guard against the direction of hair growth (Fig. 13), keeping its surface in contact with the skin.

Adjustable Beard and Hair Guards

Attach a black adjustable beard and hair guard to the full-size hair trimmer to trim evenly to the length you want. The length settings are marked on the guards.

  1. Attach the adjustable guard to the full-size hair trimmer.
  2. Use the slide switch on the guard to adjust the length (Fig. 16).
  3. Move the guard against the direction of hair growth (Fig. 13), keeping its surface in contact with the skin.

Trimming Hair on Your Head

Always comb your hair before you start. For best results, use clean, dry hair.

Extra-Wide Hair Trimmer Without a Guard

Use the extra-wide hair trimmer without a guard to trim hair on your head very close to the skin (1/32 in. / 0.5 mm) or to contour the neckline and the area around the ears.

  1. To contour the hairline around the ears, comb the hair ends over the ears. Tilt the product so that only one edge of the cutter teeth touches the hair ends as you shape the contours.
  2. To contour the nape of the neck or sideburns, turn the product and make downward strokes (Fig. 17). Move slowly and smoothly along the natural hairline.

Hair Guards

Attach a medium gray hair guard to the extra-wide hair trimmer to trim the hair on your head evenly.

  1. Attach a hair guard to the extra-wide trimmer.
  2. Move the trimmer slowly over the crown from different directions for an even result. Keep the surface of the guard in contact with the skin.
  3. Always move the trimmer against the direction of hair growth (Fig. 18). Press lightly.
  4. Make overlapping passes over the head so that all hair that should be cut is cut.
  5. Gently shake hair off the product between strokes so hair does not collect between the cutting element and the guard.

Fading Hair Guards

Attach a dark gray fading hair guard to the extra-wide hair trimmer to create a fade line around the ears. The product comes with 2 fading hair guards. Use both to trim around both ears, choosing a guard based on whether you prefer to trim back to front or front to back.

  1. Attach one fading hair guard to the extra-wide hair trimmer.
  2. Place the trimmer on your hair close to the ear, at the back or front of the ear depending on your preferred direction. Always keep the side of the guard with the short teeth closest to your ear (Fig. 19).
  3. Move the trimmer slowly around the ear while holding it steady.
  4. Repeat several times around one ear so that all hair that should be cut is cut to a fade. Then attach the other fading hair guard for the other ear.
  5. Gently shake hair off the product between strokes.

Trimming Body Hair

Always use a body guard when you trim sensitive areas.

Body Guards

Attach a green body guard to the full-size hair trimmer to trim hair below the neckline.

  1. Attach a body guard to the full-size hair trimmer.
  2. Stretch the skin with your free hand and move the guard against the direction of hair growth (Fig. 20). Keep the surface of the guard in contact with the skin.

Body Groomer

Use the body groomer to trim hair below the neckline, such as underarms and chest, close to the skin. Only use the body groomer with the skin protector.

  1. Attach the body groomer to the product.
  2. Make sure the skin protector is attached to the body groomer (Fig. 21).
  3. Stretch the skin with your free hand and move the groomer against the direction of hair growth (Fig. 22). Keep the surface of the groomer in full contact with the skin.

Precision Tools for Face, Nose and Ears

Precision Trimmer

Use the precision trimmer to create fine lines and contours around your facial style, close to the skin, to a length of 1/32 in. (0.5 mm). Hold the precision trimming head perpendicular to the skin and move it upwards or downwards with gentle pressure.

Eyebrow Guard

Use the light gray eyebrow guard to tidy eyebrows or trim sideburns to a length of 1/4 in. (6 mm).

  1. Attach the light gray eyebrow guard to the full-size hair trimmer.
  2. Comb your eyebrows in the direction of hair growth.
  3. Slowly move the trimmer against the direction of hair growth. Press lightly and keep the surface of the guard in contact with the skin (Fig. 23).

Nose and Ear Hair Trimmer

  • Make sure nasal passages are clean and outer ear canals are clean and free from wax.
  • Do not insert the cutting element too deep into your nostrils or ear canals (maximum 3/16 in. or 5 mm).
  • When trimming both nose and ear hair, use firm, rotary movements so the cutting element reaches all the hairs.
  • Clean the trimmer after each use.

This attachment is not designed to clean-shave your nostrils or ear canals. It cuts hairs to a shorter length. Nose and ear hairs have important protective functions and should not be fully removed.

To trim nose hair, gently insert the cutting element into one nostril and move the tip in and out in a firm, rotary motion (Fig. 24).

To trim ear hair:

  1. Slowly move the cutting element along the outer ear to trim hairs that stick out beyond the rim.
  2. Gently insert the cutting element into the outer ear canal and move the tip in and out in a firm, rotary motion (Fig. 24).

Precision Shaver (MG9575, MG9580, MG9585)

Use the precision shaver after trimming to shave unwanted hairs on cheeks, chin and along the beard. Pre-trim your beard first with the full-size hair trimmer without a guard for the best result. Use it to remove remaining hairs and detail your beard style. It is not suitable for a full face shave.

Gently press the precision shaver onto the skin and shave along contoured edges to remove unwanted hairs.

Cleaning

Switch the product off before removing or attaching attachments and before cleaning. Clean the product after each use.

  • Use only cold or lukewarm water.
  • Never use scouring pads, abrasive cleaning agents or aggressive liquids such as gasoline or acetone.
  • Never dry the cutting element with a towel or tissue. They can catch in the teeth and cause damage.

After Every Use: Cleaning Under the Tap

  1. Make sure the product is switched off and the USB power source is removed from the power outlet and the product.
  2. Remove any guard and the cutting element from the product.
  3. Remove hair that has collected in the hair chamber with the supplied cleaning brush.
  4. Clean the cutting element and guard under running tap water (Fig. 25).
  5. Carefully shake off excess water and let all parts air-dry completely.

Cleaning the Nose and Ear Hair Trimmer

Clean it immediately after use, and whenever a lot of hair or dirt has built up on the cutting element.

  1. Rinse the trimmer head under running tap water (Fig. 26).
  2. Switch on the product and rinse the cutting element once more to remove remaining hairs, then switch the product off.
  3. Carefully shake off excess water and let all parts air-dry completely.

For a thorough clean, detach the head and soak it in a bowl of warm water for a few minutes to soften debris. Reattach the head and turn the product on to rinse off stubborn hair or debris.

Cleaning the Precision Shaver

  1. Hold the precision shaver at the grooves on each side and pull the top part off the bottom part.
  2. Blow and/or shake out any hair collected inside.
  3. Clean the top part under running tap water.
  4. Carefully shake off excess water and let all parts air-dry completely.
  5. Reattach the top part onto the bottom part.

Cleaning the Body Groomer

  1. Remove the skin protector by pulling it upwards off the groomer.
  2. Clean the skin protector and body groomer under running tap water.
  3. Carefully shake off excess water and let both parts air-dry completely.
  4. Reattach the skin protector onto the body groomer (Fig. 21).

Storage and Travel Lock

Do not place or store the product where it can fall or be pulled into a tub, sink, water or other liquid.

  • Make sure the product is switched off and the USB power source is removed from the power outlet and the product.
  • Do not wrap the USB cable around the product when storing.
  • Make sure the product and accessories are dry, then store the product, USB power source and all accessories in the supplied pouch.
  • Keep the pouch in a safe, dry place where it will not be crushed, banged or damaged.

Attach the travel lock attachment onto the full-size hair trimmer to keep the product from switching on accidentally (Fig. 27).

Support, Warranty and Disposal

Register your product at www.norelco.com/register. For assistance, visit www.philips.com/support or call toll free 1-800-243-3050. The product has no other user-serviceable parts.

Two-Year Warranty

Philips North America LLC warrants this new product (except cutters and guards) against defects in materials or workmanship for two years from the date of purchase, and will repair or replace any defective product without charge. The warranty does not cover damage from accident, misuse or abuse, lack of reasonable care, attaching any attachment not provided with the product, loss of parts, or use with any voltage or batteries other than those specified. For warranty service, go to www.philips.com/support. Damage during shipment is not covered, and returning shipments by insured mail with insurance prepaid is suggested.

45-Day Money-Back Guarantee

If you are not fully satisfied, you can send the product back for a full refund of the purchase price. It must be shipped prepaid by insured mail with the original sales receipt showing price and date of purchase, and postmarked no later than 45 days after purchase. Philips may verify the purchase price and limit refunds to the suggested retail price. To start the process, go to www.PhilipsMoneyBack.com and follow the 3-step process. Refund checks arrive 6–8 weeks after the returned product is received.

Battery Disposal and Recycling

The product contains a rechargeable lithium-ion battery that must be disposed of properly. Contact your local town or city officials for battery disposal information, or call 1-800-822-8837 or visit www.call2recycle.org for battery drop-off locations (Fig. 28). For general recycling information, contact local waste management facilities or visit www.recycle.philips.com.

Frequently Asked Questions

What charger should I use with the Norelco All-in-One Trimmer?

Use a certified USB power source with an output rating of 5 V, ≥ 1 A. It is not included in the box. If you charge in a damp place such as a bathroom, the power source must also be IPX4 (splash-proof). Philips suggests the HQ87 as an example and lists suitable options at www.philips.com/support, or you can call 1-800-243-3050 for help choosing. A non-certified USB power source can cause hazards or serious injuries.

How long does the trimmer take to charge, and how long does it run?

A full 3-hour charge gives up to 5 hours of cordless use on the MG9570 and up to 6 hours on the MG9575, MG9580 and MG9585. If you are short on time, about 5 minutes of charging provides enough power for one trimming session. Charge between 50 °F / 10 °C and 95 °F / 35 °C, because charging or using it outside that range shortens battery life.

What do the battery light colors mean?

A flashing orange light means the battery is almost empty, a flashing white light means it is charging, and a solid white light means it is fully charged. Roughly 30 minutes after a full charge, the light turns itself off, so a dark indicator on a charged unit is expected.

Can I use the trimmer in the shower, and why won’t it run while plugged in?

Yes. It is waterproof and suitable for the bath or shower and for cleaning under the tap. For safety, it only works cordless, so it will not run while connected to a power outlet. Before you rinse it, make sure it is switched off and the USB power source is disconnected from both the outlet and the product. Keep the USB cable, power source and charging stand dry.

How do I attach or remove a guard or cutting element?

To remove a cutting element, put your thumb under its teeth and push up until it comes off the handle. To attach it, seat the plastic notch in the guiding slot and press the teeth down until it clicks. For a guard, slide its front onto the teeth and press the notch at the back down until it clicks. To take it off, push the back of the guard away from the product and slide it forward off the teeth. Turn the trimmer off first.

Which guard should I use for my beard, head, body or eyebrows?

Match the color to the area. Black guards are for beard and scalp hair on the full-size trimmer, medium gray guards are for scalp hair on the extra-wide trimmer, light gray is for eyebrows, green is for the body, and blue is the Skin Protect guard. For sensitive areas below the neckline, always use a body guard. If this is your first time, start at the longest setting to learn how it cuts.

How do I change the length on the adjustable and precision guards?

On the precision trimming guard (1 mm – 3 mm), scroll the wheel to your length. On the adjustable beard and hair guards, move the slide switch. The numbers are millimeters of hair left after trimming. Always move the guard against the direction of hair growth and keep it flat against the skin.

How do I create a fade around my ears?

Fit one of the two dark gray fading hair guards to the extra-wide hair trimmer. Place it near the ear, at the back or front depending on your preferred direction, with the short-teeth side closest to your ear. Move slowly around the ear and repeat until the fade looks even, then switch to the second guard for the other ear. Shake hair off between strokes.

How should I clean the trimmer after use?

Turn it off, remove the guard and cutting element, brush out the hair chamber with the cleaning brush, and rinse the parts under running tap water. Shake off excess water and let everything air-dry. Use only cold or lukewarm water, and never use abrasive cleaners, gasoline or acetone. Do not dry the cutting element with a towel or tissue, since fibers can catch in the teeth.

How do I trim nose and ear hair safely, and how deep can I go?

Start with clean nasal passages and wax-free outer ear canals. Insert the tip gently, no deeper than 3/16 in. (5 mm), and move it in and out in a firm rotary motion. It shortens hairs and is not meant to clean-shave, since nose and ear hairs protect you. Afterward, rinse the head under running water, switch the product on to flush out remaining hairs, switch it off, and let it air-dry.

What is the travel lock attachment and how do I store the trimmer?

The travel lock attachment fits onto the full-size hair trimmer and keeps the product from switching on by accident while packed. For storage, switch the product off, disconnect the power source, and make sure everything is dry. Then place the product, USB power source and accessories in the supplied pouch, without wrapping the USB cable around the trimmer.

What does the warranty cover?

Philips North America LLC covers the product against defects in materials or workmanship for two years from purchase, except cutters and guards. It does not cover accident, misuse, abuse, lack of reasonable care, attachments not provided with the product, lost parts, or use with the wrong voltage or batteries. Go to www.philips.com/support to start warranty service.

Found something that needs correcting?

If a model number, instruction, specification, or document link looks incorrect, please send us the page URL and relevant details.