Lenovo IdeaPad 1 14ADA05
The Lenovo IdeaPad 1 14ADA05 (machine type 82GW) is a 14-inch Windows laptop with an HD (1366 × 768) or FHD (1920 × 1080) screen, a built-in camera and microphones, Bluetooth and wireless LAN. It has two USB 3.2 Gen 1 Type-A connectors, an HDMI connector, a microSD card slot and a combo audio jack. Memory is on-board DDR4 with no memory slots, and the built-in battery is rated 35 Wh. Day-to-day control comes from the keyboard hotkeys, the Novo button menu for startup options, and the UEFI/BIOS setup utility, where you can set the startup order, the hotkey mode and passwords. The same guide also covers the IdeaPad 1 11IGL05, 14IGL05 and 11ADA05, so check the model-specific notes below.
Models covered by this guide
This guide applies to four Lenovo IdeaPad 1 models. Illustrations may look slightly different from your computer, and the guide notes that it may describe accessories, features and software that are not available on every model.
| Model name | Machine type (MT) |
| Lenovo IdeaPad 1 11IGL05 | 81VT |
| Lenovo IdeaPad 1 14IGL05 | 81VU |
| Lenovo IdeaPad 1 11ADA05 | 82GV |
| Lenovo IdeaPad 1 14ADA05 | 82GW |
The instructions are written for the Windows operating system and do not apply if you install and use another operating system. Lenovo notes that the content is subject to change without notice and that the latest version is available at https://support.lenovo.com.
Parts, ports and indicator lights
Front
| Part | What it does |
| Wireless antennas | Send and receive radio waves for the built-in wireless LAN and Bluetooth module. They are not visible from outside the computer. If they are close to your body (less than 20 cm), the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with the computer. |
| Microphones | Capture or record sound and voice. |
| Camera | Captures still and moving images for photos, video recording and video chatting. |
| Camera light | If the light is on, the camera is in use. |
| Screen | Displays text, graphics and videos. |
Base
| Part | What it does |
| Keyboard | Enter characters and interact with programs. It also includes hotkeys and function keys for changing settings and performing tasks quickly. |
| Touch pad | Performs finger touch and all the functions of a traditional mouse, and supports multi-touch. |
Left side
| Part | What it does |
| Power connector | Connects to power with the included power cord and ac power adapter. |
| Charging light | Solid white: connected to ac power, battery capacity 91%–100%. Solid amber: connected to ac power, battery capacity 1%–90%. Off: not connected to ac power. |
| USB 3.2 Gen 1 Type-A connectors (two) | Connect a USB-compatible device such as a USB keyboard, mouse, storage device or printer. |
| HDMI connector | Connects to a compatible digital audio device or video monitor, such as an HDTV. |
| microSD card slot | Accepts a microSD card for data transfer or storage. |
| Novo button hole | Press the Novo button to open the Novo Button menu. |
| Power light | On: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode. |
Right side
The combo audio jack connects headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. This jack does not support standalone external microphones, so if you use a headset, choose one with a single plug.
Bottom
The speakers are on the bottom of the computer. The product name and serial number can usually be found on the bottom of the computer, either printed on a label or etched on the cover. For computers sold in the United States or Canada with factory-installed wireless modules, the FCC ID and IC ID information is visible on the bottom cover.
Specifications for the IdeaPad 1 14ADA05
| Item | Specification |
| Dimensions (14-inch models) | Width 327.1 mm (12.87 inches); depth 235 mm (9.25 inches); thickness 17.7 mm (0.69 inches) at the thinnest and 17.9 mm (0.70 inches) at the thickest |
| Screen | 355.6 mm (14 inches); 1366 × 768 pixels (HD model) or 1920 × 1080 pixels (FHD model) |
| ac power adapter | Input 100 V ac–240 V ac, 50 Hz–60 Hz; output 20 V dc, 2.25 A; power 45 W |
| Battery pack (14ADA05 and 11ADA05) | 35 Wh, 2 cells (the 11IGL05 and 14IGL05 are 32 Wh, 2 cells) |
| Memory | On-board DDR4 SDRAM; number of slots: 0 |
| Secondary storage | M.2 solid-state drive (SSD) or eMMC; capacity differs by model |
| Microprocessor | Type system information in the Windows search box and press Enter to view it |
| Connectors and slots | Combo audio jack; USB 3.2 Gen 1 Type-A connector × 2; HDMI connector; microSD card slot |
| Security | UEFI/BIOS passwords (administrator, user, master hard disk, user hard disk); trusted platform module (TPM) |
| Wireless | Bluetooth and wireless LAN |
Battery capacity is the typical or average capacity measured in a specific test environment. Capacities measured elsewhere may differ but are no lower than the rated capacity shown on the product label. To see storage details, right-click the Start button and select Device Manager.
USB transfer rates
Actual USB transfer rates depend on the host and peripheral devices, file attributes and system configuration, and will be slower than the listed data rate. USB 3.2 Gen 1 is rated at 5 Gbit/s and USB 3.2 Gen 2 at 10 Gbit/s.
Operating environment
| Condition | Limit |
| Maximum altitude (without pressurization) | 3048 m (10 000 ft) |
| Operating temperature, up to 2438 m (8000 ft) | 5°C to 35°C (41°F to 95°F) |
| Storage temperature, up to 2438 m (8000 ft) | 5°C to 43°C (41°F to 109°F) |
| Above 2438 m (8000 ft) | Maximum operating temperature under unpressurized conditions is 31.3°C (88°F) |
| Operating relative humidity | 8% to 95% at wet-bulb temperature 23°C (73°F) |
| Storage relative humidity | 5% to 95% at wet-bulb temperature 27°C (81°F) |
When you charge the battery, its temperature must be no lower than 10°C (50°F).
Getting started with Windows settings
To change a setting, type the keyword in the Windows search box, select the best match and follow the on-screen instructions.
| Function | What it does | Search keyword |
| Control Panel | View or change Windows settings, including hardware and software setup. | Control Panel |
| Connect to Wi-Fi networks | Click the network icon in the Windows notification area, then select a network. On some wireless LAN modules, 802.11ax may be disabled in some countries or regions to follow local regulations. | Wi-Fi |
| Airplane mode | Turns all wireless communications on and off, for example when boarding an airplane. | Airplane mode |
| Night light | Shows warmer colors and reduces emitted blue light, which can reduce eye fatigue or strain. | Night light |
| Adjust color temperature | Available once night light is on. Selected Lenovo computers are low blue light certified when tested with night light on and color temperature at the default value of 48. | Night light |
| Windows Updates | Updates for your Windows version download automatically when the computer is online, and you are prompted to restart to install them. You can also check manually. | Windows Updates |
Only use Windows Update to download and install Windows updates, because updates from other sources may include security risks. If the on-screen instructions do not solve a problem, type Get Help or Tips in the Windows search box, or visit https://support.microsoft.com.
Lenovo Vantage and Lenovo PC Manager
Lenovo Vantage and Lenovo PC Manager is Lenovo software that may be pre-installed. You can use it to view product information, view warranty and support information, run a hardware scan and diagnose problems, change hardware settings, and update Windows, drivers and UEFI/BIOS. To open it, enter the software name in Windows Search and select the match. If Lenovo Vantage is not pre-installed, you can download it from Microsoft Store.
The Novo Button menu
The Novo Button menu can be displayed before the operating system starts. From it you can open the BIOS/UEFI setup utility, open the boot device selection menu, or open the Windows startup options screen. From the Windows startup options screen you can start the computer from a recovery drive, reset the computer, or open the advanced options screen.
Open the Novo Button menu
- Turn off the computer.
- Open the LCD screen and press the Novo button (the Novo button hole is on the left side).
Alternatively, turn off the computer and press Fn and the power button to open the menu.
Keyboard hotkeys and hotkey mode
Hotkey functions
Some keys are printed with icons. These hotkeys can be pressed alone or together with the Fn key, depending on the hotkey mode setting, and their functions are shown by the printed icons.
| Hotkey icon | Function |
| Speaker with slash | Mute/Unmute sound |
| Speaker minus and plus | Decrease/Increase system volume |
| Microphone with slash | Mute/Unmute the microphone |
| Circular arrow | Reload web pages or refresh the screen |
| Touch pad with slash | Enable/Disable the touchpad |
| Airplane | Turn airplane mode on and off |
| Camera with slash | Enable/Disable the integrated camera |
| Padlock | Lock the screen |
| Two screens | Switch display devices |
| Sun with plus and minus | Increase/Decrease screen brightness |
Hotkey mode
Some hotkeys share keys with the function keys (F1 to F12). Hotkey mode is a UEFI/BIOS setting that changes which behavior needs the Fn key.
| Hotkey mode setting | To use hotkeys | To use function keys |
| Disabled | Hold down Fn and press the hotkey. | Press the function keys directly. |
| Enabled | Press the hotkeys directly. | Hold down Fn and press the function key. |
Hotkeys that do not share keys with function keys are not affected by this setting and should always be used with the Fn key.
Change the hotkey mode
- Open the UEFI/BIOS setup utility.
- Select Configuration ➝ Hotkey Mode and press Enter.
- Change the setting to Disabled or Enabled.
- Select Exit ➝ Exit Saving Changes.
Power and battery
Check the battery status
The battery status icon is in the Windows notification area. Click it to see the percentage remaining, view the current power plan and change the power mode. A warning message appears when the battery is low.
Charge the battery
When the remaining power is low, connect the computer to ac power. The battery is fully charged in about two to four hours, depending on battery capacity, the physical environment and whether you are using the computer. The recommended temperature range for charging is 10°C (50°F) to 35°C (95°F). To maximize battery life, the computer does not start recharging if the remaining power is greater than 95%.
Check the battery temperature
- Open Lenovo Vantage.
- Click Hardware Settings ➝ Power.
- In the Power Status section, click Show Details to view the battery temperature.
If you use Lenovo PC Manager, select System hardware ➝ Battery.
Set the power button behavior
By default, pressing the power button puts the computer to sleep. To change this:
- Type Control Panel in the Windows search box and press Enter. View by large or small icons.
- Select the power options and click Choose what the power button does.
Change or customize a power plan
This applies to computers with pre-installed Windows. Type power plan in the Windows search box, press Enter, and customize the plan you prefer. Lenovo’s ENERGY STAR section lists these preset values for the Balanced plan when plugged into ac power: turn off the display after 10 minutes and put the computer to sleep after 10 minutes of inactivity.
UEFI/BIOS setup utility
UEFI/BIOS is the first program that runs when the computer starts. It initializes hardware and loads the operating system, and its setup utility lets you change certain settings.
Open the UEFI/BIOS setup utility
- Turn on or restart the computer.
- When the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled, press Fn + F2.
You can also reach it from the Novo Button menu.
Change the startup sequence
- Open the UEFI/BIOS setup utility.
- Go to the Boot menu.
- Follow the on-screen instructions to change the order of devices under Boot Priority Order.
To change the startup sequence temporarily without opening the setup utility, start the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.
UEFI/BIOS password types
| Password type | Prerequisite | Usage |
| Administrator password | None | Required to start the setup utility. |
| User password | Administrator password must be set | Can be used to start the setup utility. |
| Master hard disk password | None | Required to start the operating system. |
| User hard disk password | Master hard disk password must be set | Can be used to start the operating system. |
All passwords set in the setup utility use alphanumeric characters only. If you start the setup utility with the user password, you can change only a few settings.
Set an administrator password
Attention: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to a Lenovo authorized service provider to have the system board replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security ➝ Set Administrator Password and press Enter.
- Enter a password of letters and numbers only, then press Enter.
- Enter the password again and press Enter.
- Select Exit ➝ Exit Saving Changes.
Change or remove the administrator password
- Open the setup utility using the administrator password.
- Select Security ➝ Set Administrator Password and press Enter.
- Enter the current password.
- In Enter New Password, type the new password.
- In Confirm New Password, type it again. To remove the password, press Enter in both boxes without typing any character.
- Select Exit ➝ Exit Saving Changes.
If you remove the administrator password, the user password is removed too.
Set a user password
The administrator password must be set first.
- Open the setup utility using the administrator password.
- Select Security ➝ Set User Password and press Enter.
- Enter a letters-and-numbers password that differs from the administrator password, then press Enter.
- Enter it again and press Enter.
- Select Exit ➝ Exit Saving Changes.
Enable the power-on password
With the administrator password already set:
- Open the setup utility.
- Select Security ➝ Power on Password and press Enter.
- Change the setting to Enabled.
- Select Exit ➝ Exit Saving Changes.
A prompt then appears every time you turn on the computer, and you must enter the administrator or user password to start it.
Set a hard disk password
Attention: If you forget the hard disk password, Lenovo authorized service personnel cannot reset it or recover data from the hard disk. You must take the computer to a Lenovo authorized service provider to have the hard disk drive replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the setup utility.
- Select Security ➝ Set Hard Disk Password and press Enter. You cannot set it if you started the setup utility with the user password.
- Follow the on-screen instructions to set the master and user passwords. They must be set at the same time.
- Select Exit ➝ Exit Saving Changes.
Change or remove the hard disk password
- Open the setup utility and select Security.
- To change or remove the master password, select Change Master Password and press Enter. Removing the master password also removes the user hard disk password.
- To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
- Select Exit ➝ Exit Saving Changes.
Safety, heat and care
Lenovo asks owners to read Appendix A of the guide, the Safety and Warranty Guide and the Setup Guide before using the computer.
Heat
When the computer is on or the battery is charging, the base, palm rest and some other parts may become hot, and extended contact, even through clothing, could cause discomfort or a skin burn. Avoid keeping your hands, lap or any other part of your body on a hot section for long, and lift your hands from the palm rest periodically. The ac power adapter also generates heat when connected to an outlet and the computer, so do not keep it in contact with your body, never use it to warm your body, and do not wrap the cords around it while in use.
Ventilation
Never block, cover or disable ventilation slots, fans or heat sinks, for example by placing the computer on a bed, sofa, carpet or other flexible surface. Keep the cover closed whenever the computer is plugged in, regularly check for dust and remove it from vents and bezel perforations, and do not operate the computer inside furniture. Airflow temperatures into the computer should not exceed 35°C (95°F). Do not operate or charge the computer near flammable materials or in explosive environments.
Power cords and the ac power adapter
- Use only the power cords and power adapters supplied by the product manufacturer.
- Never wrap a power cord around the adapter or another object, and route cords so they cannot be walked on, tripped over or pinched.
- Keep cords and adapters away from liquids, because liquids can cause a short circuit and gradual corrosion that can lead to overheating.
- Do not use an adapter with corrosion at the ac input pins or signs of overheating such as deformed plastic, and do not cover the adapter while it is plugged in.
- Make sure cord connectors are fully inserted into receptacles, and do not overload outlets, extension cords or power strips.
Battery
The battery is built in. Do not attempt to remove or replace it, because replacement must be done by a Lenovo-authorized repair facility or technician. Do not open, disassemble, crush, puncture, short-circuit or expose the battery to water, and keep it away from children and fire. Stop using it if it is damaged or you notice discharge or a buildup of foreign material. Store rechargeable batteries or products that contain them at room temperature, charged to approximately 30%–50% of full capacity, and charge them at least once per year to prevent over-discharging. A battery other than the one Lenovo specifies, or one that is disassembled or modified, is not covered by the warranty.
Liquids, handling and carrying
Keep liquids away from the computer to avoid spills and electrical shock. Do not drop, bump, scratch, twist, hit, vibrate, push or place heavy objects on the computer, display or external devices. Before putting the computer in a carrying case, make sure it is off, in sleep mode or in hibernation mode, use a case with adequate cushioning, and do not pack it in a tightly packed bag.
External devices and cables
Do not connect or disconnect external device cables other than USB and 1394 cables while the computer is on. After shutting down, wait at least five seconds before disconnecting external devices. Do not use the computer during a lightning storm or connect or disconnect cables during an electrical storm.
Screen and headphones
The LCD is made of glass and can break if the computer is dropped or handled roughly. If the internal fluid gets in your eyes or on your hands, wash the affected areas with water for at least 15 minutes and get medical care if any symptoms are present afterward. Excessive sound pressure from earphones and headphones can cause hearing loss, so set the volume and equalizer to an appropriate level.
Conditions that need immediate action
Stop using the computer and unplug it from the power source until you have spoken to the Customer Support Center if you notice any of the following:
- Power cords, plugs, adapters, extension cords, surge protectors or power supplies that are cracked, broken or damaged.
- Signs of overheating, smoke, sparks or fire.
- Battery damage such as cracks, dents or creases, discharge from the battery, or a buildup of foreign substances on it.
- Cracking, hissing or popping sounds, or a strong odor from the product.
- Signs that liquid has spilled or an object has fallen onto the computer, power cord or adapter.
- Exposure of the computer, cord or adapter to water.
- The product has been dropped or damaged in any way.
- The product does not operate normally when you follow the operating instructions.
Do not try to diagnose an odor, smoke, sparks or unusual sounds yourself, and contact the Customer Support Center for guidance.
Replaceable parts and service
For this product, the power cord and the ac power adapter are listed as self-service customer replaceable units (CRUs). Replacing any other part, including the built-in rechargeable battery, must be done by a Lenovo-authorized repair facility or technician. Do not attempt to service the product yourself unless the Customer Support Center or your documentation tells you to. Never remove the cover of a power supply or any part carrying the hazardous-voltage label, because there are no serviceable parts inside.
Help and support
Self-help resources
| Need | Where to look |
| Troubleshooting and frequently asked questions | https://www.lenovo.com/tips and https://forums.lenovo.com |
| Latest drivers, firmware and UEFI/BIOS | Lenovo Vantage or Lenovo PC Manager, or https://support.lenovo.com |
| Hardware diagnostics and warranty status | Lenovo Vantage or Lenovo PC Manager |
| Reset or restore Windows | Lenovo recovery options at https://support.lenovo.com/HowToCreateLenovoRecovery, or Windows recovery options through https://pcsupport.lenovo.com (detect or select your model, then Diagnostics ➝ Operating System Diagnostics) |
| Product documentation | https://support.lenovo.com, detect or select your model, then choose Documentation |
| Accessibility information | https://www.lenovo.com/accessibility |
Before you contact Lenovo
Record the product name, machine type and serial number, along with the problem details: whether it is continuous or intermittent, any error message or code, the operating system and version, the software running at the time, and whether you can reproduce it. Support phone numbers for your country or region are at https://pcsupport.lenovo.com/supportphonelist.
Warranty-period services
During the warranty period, Lenovo Customer Support Center offers problem determination, Lenovo hardware repair for problems caused by Lenovo hardware under warranty, and engineering change management. Services not covered include replacement or use of non-Lenovo or nonwarranted parts, identification of software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, changes to device drivers, installation and maintenance of network operating systems, and installation and maintenance of programs. Warranty terms are in the Safety and Warranty Guide that comes with the computer.
Frequently Asked Questions
How do I open the Novo Button menu on the IdeaPad 1 14ADA05?
Turn the computer off, open the screen and press the Novo button, which sits in a small hole on the left side. From the menu you can choose the UEFI/BIOS setup utility, the boot device selection menu or the Windows startup options screen. If you prefer, turn the computer off and press Fn and the power button together to reach the same menu.
How do I enter the UEFI/BIOS setup utility?
Turn the computer on or restart it, then press F2 repeatedly as soon as the Lenovo logo appears. If hotkey mode is enabled, press Fn + F2 instead. The Novo Button menu is another route in, and the setup utility is where you change the startup order, hotkey mode and passwords.
How can I start the computer from a USB drive or another device just once?
Start the computer and press F12 repeatedly when the Lenovo logo appears (Fn + F12 if hotkey mode is enabled). This changes the startup sequence temporarily without opening the setup utility. To make a lasting change, open the setup utility, go to the Boot menu and reorder devices under Boot Priority Order, then choose Exit ➝ Exit Saving Changes.
What do the charging light colors mean?
Solid white means the computer is on ac power and the battery is between 91% and 100%. Solid amber means it is on ac power and the battery is between 1% and 90%. If the light is off, the computer is not connected to ac power.
What does the power light tell me?
The light is on while the computer is turned on. It is off when the computer is turned off or in hibernation, and it blinks when the computer is in sleep mode. Because the power button puts the computer to sleep by default, a blinking light after a press is normal unless you changed that behavior in the Windows power options.
How long does the battery take to charge, and why does it not charge above 95%?
A full charge takes about two to four hours, depending on the battery capacity, the surroundings and whether you are using the computer. Charging works best between 10°C (50°F) and 35°C (95°F), and the battery temperature must be at least 10°C (50°F) when you charge. To maximize battery life, the computer does not start recharging when the remaining power is above 95%, so a battery sitting at 96% to 100% is working as designed.
How do I use the F1–F12 keys without holding Fn?
Change the hotkey mode in the setup utility. Open the setup utility, select Configuration ➝ Hotkey Mode, press Enter and pick the setting you want, then select Exit ➝ Exit Saving Changes. With hotkey mode Disabled, function keys work directly and hotkeys need Fn. With it Enabled, hotkeys work directly and function keys need Fn. Hotkeys that do not share a key with a function key always need Fn.
What should I do if the computer stops responding?
Press and hold the power button until the computer turns off, then restart it. Unsaved work may be lost, so save often when you can.
What should I do if I spill liquid on the computer?
Carefully unplug the ac power adapter and turn the computer off immediately, because the faster you stop current flowing, the less damage short circuits are likely to cause. You might lose some data or work by turning it off, but leaving it on could make the computer unusable. Wait until you are certain all the liquid is dry before turning it on again. Do not turn the computer over to drain the liquid; if your computer has keyboard drainage holes on the bottom, liquid will drain through them.
Can I use an external microphone with the headphone jack?
Not a standalone one. The combo audio jack accepts headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug, but it does not support standalone external microphones. If you use a headset, choose one with a single plug.
What happens if I forget my administrator or hard disk password?
Lenovo authorized service personnel cannot reset either password. For a forgotten administrator password you must take the computer to a Lenovo authorized service provider to have the system board replaced, and for a forgotten hard disk password the hard disk drive must be replaced and the data cannot be recovered. Proof of purchase is required and a fee is charged for parts and service, so be extremely careful when setting these passwords and keep a record in a safe place.
Can I replace the battery or add memory myself?
No to both for this product. The memory is on-board DDR4 with zero memory slots, and the battery is built in, so it must be replaced by a Lenovo-authorized repair facility or technician. The only parts listed as customer replaceable are the power cord and the ac power adapter.
