Bella 12″ x 22″ Griddle
The Bella 12″ x 22″ Griddle is an electric countertop griddle with an EverGood ceramic nonstick coating on the cooking surface. A removable temperature control probe sets the heat. A dishwasher-safe drip tray slides in under the side of the griddle, directly beneath the grease drain, to catch grease. Cool-touch handles make it easier to carry. The griddle runs on a standard 120 V AC wall outlet and is for household use only.
You set the cooking temperature by turning the dial on the probe. The adjustment range is 200°F to 400°F. An indicator light shows when the griddle is heating and goes out once the selected temperature is reached. During cooking the light cycles on and off as the griddle holds its temperature. The griddle takes about 10 minutes to preheat. It is meant for foods such as bacon, sausage, pancakes, French toast, hamburgers, ham slices, sandwiches, pork chops, and steaks.
The ceramic coating needs some care. Cooking sprays, metal utensils, steel wool, and very high heat can all shorten its life, so read the care sections before your first use. The griddle itself cannot go in the dishwasher.
Parts and Controls
| Part | Description | Notes |
| Drip tray | Dishwasher-safe tray for grease | Not shown in the illustration. Slides into the rails under the side of the griddle, directly under the grease drain. |
| Removable temperature control (probe) | Dial that sets the cooking temperature, with an indicator light | Not submersible. Use only the probe supplied with this griddle. |
| EverGood Ceramic Nonstick Coating | Cooking surface | Do not use cooking sprays, steel wool, or abrasive cleaners. |
| Cool-touch handles | Handles for carrying and positioning | |
| Probe insert | Socket on the griddle where the temperature control probe attaches | |
| Polarized plug | Power plug with one blade wider than the other | Not shown in the illustration. |
The product may vary slightly from the illustration.
Safety Instructions
The manual says all users must read and understand it before operating or cleaning the griddle. Save these instructions.
Important Safeguards
When you use electrical appliances, follow basic safety precautions, including these:
- Read all instructions.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electric shock, do not immerse the cord, plugs, or appliance in water or any other liquid.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless a person responsible for their safety supervises them or has instructed them in its use.
- Close supervision is necessary when any appliance is used by or near children.
- Turn the unit off and unplug it from the outlet when it is not in use and before cleaning. Let it cool before putting on or taking off parts and before cleaning.
- Do not operate any appliance with a damaged cord or plug, after it malfunctions, or after it has been damaged in any way. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
- Accessory attachments not recommended by the manufacturer may cause injuries.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place the griddle on or near a hot gas or electric burner, or in a heated oven.
- Use extreme caution when moving an appliance that contains hot oil or other hot liquids.
- Always attach the temperature control probe to the appliance first, then plug the cord into the wall outlet. To disconnect, turn the temperature control probe to OFF, then remove the plug from the wall outlet.
- Do not use the appliance for anything other than its intended use.
Additional Safeguards
CAUTION, HOT SURFACES: This appliance generates heat and escaping steam during use. Take proper precautions to prevent burns, fires, or other injury to people or damage to property.
CAUTION: The griddle is hot during operation and stays hot for some time after you turn it OFF. Always use oven mitts when handling hot materials, and let metal parts cool before cleaning. Do not place anything on top of the appliance while it is operating or hot.
- Plug the cord into a 120 V AC electrical outlet only.
- If the griddle starts to malfunction during use, turn the unit off and unplug the cord immediately. Then remove the temperature control probe. Do not use or try to repair a malfunctioning griddle.
- Do not leave the griddle unattended during use.
Plug, Cord, and Power Notes
Polarized plug. One blade is wider than the other, so the plug fits a polarized outlet only one way. If it does not fit fully, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Cord. A short power-supply cord is provided to reduce the risk of tangling or tripping over a long cord. Longer detachable cords or extension cords can be used if you take care. If you use one:
- Its marked electrical rating must be at least as great as the griddle’s electrical rating.
- If the appliance is the grounded type, the extension cord must be a grounding-type 3-wire cord.
- Arrange the cord so it does not drape over the countertop or tabletop, where children could pull on it or someone could trip over it.
Circuit load. If other appliances overload the electrical circuit, the griddle may not operate properly. Run it on a separate circuit from other appliances.
CAUTION, plasticizers: To keep plasticizers from migrating into the finish of a countertop, tabletop, or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the surface. Otherwise the finish may darken, permanent blemishes may occur, or stains may appear.
Temperature Control Probe
The manual calls the temperature control probe the “nerve center and brain” of the griddle, so handle it carefully. Dropping or banging it can change its calibration and make the temperature settings inaccurate.
- Rotate the dial to the temperature your recipe calls for.
- The indicator light comes on as soon as you turn the dial. It goes out once the selected temperature is reached.
- Let the griddle cool before you remove the probe.
- To clean the probe, wipe it with a soft, damp cloth, then dry it thoroughly before using it again. The probe is not submersible.
CAUTION: Use only the temperature control probe supplied with this griddle. Any other probe may cause fire, electric shock, or injury.
Before Using the Griddle for the First Time
- Unpack the griddle carefully and remove all packaging materials.
- Place the griddle on a clean, flat work surface. Keep the sides and back at least 4 inches away from any walls, cabinets, or objects on the counter or table.
- Read the care and cleaning sections of the manual before first use.
- Wash the griddle in mild dishwashing soap, wipe it, and let it dry. The griddle is not dishwasher safe.
- Slide the drip tray into the rails under the side of the griddle, directly under the grease drain.
- Turn the temperature control dial on the probe to OFF and attach the probe securely.
- Coat the ceramic nonstick surface with vegetable shortening before heating. If needed, remove excess oil with a paper towel.
Some countertop and table surfaces, such as Corian and similar materials, are not designed to withstand the prolonged heat this griddle produces. The manual recommends placing a hot pad or trivet under the griddle to avoid damage to the surface.
Operating the Griddle
Setting Up and Preheating
- Turn the temperature control probe to OFF.
- Plug the temperature control probe securely into the griddle’s control probe socket.
- Plug the cord into a standard 120 V AC wall outlet.
- Preheat the griddle for about 10 minutes before cooking. To preheat, turn the dial to the temperature you want. The indicator light comes on right away and goes out when the set temperature is reached.
IMPORTANT: Always plug the cord into the griddle first, then into the wall outlet.
Cooking
- Add food and cook according to your recipe. Adjust the dial between 200°F and 400°F as needed.
- While cooking, the light turns on and off to show the griddle is holding the proper temperature.
- When you cook bacon or other foods with a lot of grease, check the drip tray so it does not fill up. Remove the tray, empty it, and wash it if needed.
CAUTION: Griddle surfaces are hot during use.
CAUTION: Do not use cooking sprays. They can cause a build-up on the cooking plates and may affect the ceramic nonstick performance of the product.
Finishing Up
- When cooking is done, turn the temperature control to OFF. The indicator light turns off.
- Unplug the cord from the wall outlet and let the griddle cool completely.
- Remove the temperature control probe from the griddle, then follow the cleaning instructions below.
Time and Temperature Chart
Use these settings as basic cooking suggestions.
| Food | Temperature | Time | Directions |
| Bacon | 325°F to 350°F | 8 to 14 minutes | Set to the appropriate temperature and turn as required. |
| Sausage | 325°F to 350°F | 20 to 30 minutes | Set to the appropriate temperature and turn as required. |
| French toast | 350°F | 6 to 10 minutes | Rotate halfway into the cooking time. |
| Hamburger | 350°F | 3 to 14 minutes | Rotate halfway into the cooking time. |
| Ham slices | 350°F | 14 to 18 minutes | Rotate halfway into the cooking time. |
| Sandwiches | 350°F | 6 to 10 minutes | Butter the outside and brown both sides. |
| Pancakes | 400°F | 2 to 6 minutes | Pour batter onto the griddle. Turn when bubbles appear on top. |
| Pork chops | 350°F | 20 to 30 minutes | Brown both sides, then reduce the temperature to 325°F. Rotate halfway into the cooking time. |
| Steaks, rare | 400°F | 4 to 6 minutes | Rotate halfway into the cooking time. |
| Steaks, medium | 400°F | 7 to 12 minutes | Rotate halfway into the cooking time. |
| Steaks, well | 400°F | 13 to 18 minutes | Rotate halfway into the cooking time. |
The manual also recommends medium to low heat for the best results with the ceramic coating. If you need a higher temperature, preheat on medium heat for a few minutes first.
USDA Internal Temperature Guidelines
The manual cites the United States Department of Agriculture’s recommended internal temperatures for killing harmful bacteria:
| Food | Internal temperature |
| Ground turkey and chicken | 165°F / 74°C |
| Ground beef, veal, lamb, and pork | 160°F / 71°C |
| Whole chicken and turkey | 180°F / 82°C |
| Chicken and turkey breast | 170°F / 77°C |
| Goose and duck | 180°F / 82°C |
| Fresh beef, veal, lamb, etc. | At least 145°F / 63°C |
| Fresh pork | At least 160°F / 71°C |
| Reheated meat and poultry products | 165°F / 74°C |
Care and Use of the Ceramic Nonstick Surface
- Do not stack objects on the cooking plates, to avoid scratching the nonstick surface.
- Do not use cooking sprays. They can build up on the cooking plates and affect the nonstick performance.
- Use medium to low heat for the best results. Very high temperatures can cause discoloration and shorten the life of any ceramic nonstick surface. If you need higher temperatures, preheat on medium heat for a few minutes.
- Use nylon, plastic, wooden, or rubber utensils to protect the coating. Never cut food on the griddle.
- Remove stubborn stains with a plastic scouring pad and mild dishwashing liquid. Do not use steel wool, which damages the ceramic nonstick surface.
Cleaning the Griddle
CAUTION: Do not immerse the cord, plug, or temperature control probe in water or any other liquid.
CAUTION: Let the griddle cool thoroughly before cleaning to avoid accidental burns.
- When cooking is finished, turn the unit off and unplug the cord from the wall outlet. Let the griddle cool.
- Remove the temperature control probe. It may be hot after use, so let it cool before handling.
- If needed, wipe the temperature control case and probe with a damp, soft cloth. Dry the probe completely and set it aside. The probe is not submersible.
- Remove the drip tray and empty it. Wash the griddle and drip tray in soapy water, rinse, and dry thoroughly.
- To hand wash the griddle plate, use hot soapy water and dry it with a towel. The probe and the probe receptacle must be completely dry before use.
- Loosen stubborn food particles with a plastic cleaning pad. Avoid hard scouring of the ceramic nonstick finish, which can scratch the surface. Do not use steel wool, scouring pads, or abrasive cleaners on any part of the griddle.
Removing Stains from the Ceramic Coating
- Find the stained areas on the cooking surface and sprinkle some baking soda on them.
- Add a little water to turn the baking soda into a paste.
- Let the paste stand on the stains for a few minutes, and no longer than an hour.
- Rub with a soft, damp cloth or scrub lightly with a plastic scouring pad. Wipe clean and dry thoroughly.
- Repeat once more if needed.
Do not rub vigorously with a plastic scouring pad, and never use a metal scouring pad, because it can damage the ceramic nonstick coating. According to the manual, stains do not affect the performance or nonstick properties of the coating.
Maintenance and Service
The griddle needs little maintenance and has no user-serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly, other than cleaning, must be done by a qualified appliance repair technician. If the griddle is damaged or malfunctions, stop using it and return it to the nearest authorized service facility for examination, repair, or adjustment.
Warranty and Customer Support
Limited Two-Year Warranty
SENSIO Inc. warrants that for two years from the date of purchase, the product will be free from mechanical defects in material and workmanship. For non-mechanical parts, the warranty period is 90 days. During the warranty period, SENSIO Inc. will, at its sole discretion, repair or replace a defective product or issue a refund.
- The warranty is valid only for the original retail purchaser from the date of initial retail purchase, and it is not transferable.
- Keep the original sales receipt. Proof of purchase is required to validate the warranty.
- Retail stores that sell the product cannot alter or revise the warranty terms.
- The warranty does not cover normal wear of parts or damage from negligent use, improper voltage or current, improper routine maintenance, or use contrary to the operating instructions. It also excludes disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel, and Acts of God such as fire, floods, hurricanes, or tornadoes.
- SENSIO Inc. is not liable for incidental or consequential damages from breach of any express or implied warranty. Except where applicable law prohibits it, any implied warranty of merchantability or fitness for a particular purpose is limited to the duration of the warranty.
- Some states, provinces, or jurisdictions do not allow these exclusions or limits, so they may not apply to you. The warranty gives specific legal rights that may vary by state, province, or jurisdiction.
How to Get Warranty Service
- Call Customer Service at the toll-free number 1-866-832-4843. A representative will try to resolve the problem by phone.
- If the representative cannot resolve it, you will receive a case number and be asked to return the product to SENSIO Inc.
- Attach a tag to the product with your name, address, daytime contact phone number, case number, and a description of the problem.
- Include a copy of the original sales receipt.
- Package the tagged product and receipt carefully and send it, with shipping and insurance prepaid, to SENSIO Inc.’s address.
SENSIO Inc. takes no responsibility or liability for the returned product while it is in transit to the Customer Service Center.
Contact and Registration
For customer service questions or comments, call 1-866-832-4843 or email help@bellahousewares.com. The manual also invites you to register your product at bellakitchenware.com. The product is distributed by Sensio Inc., dba Made by Gather, New York, NY 10016, USA.
Frequently Asked Questions
How long does the griddle take to preheat?
Preheat for about 10 minutes before you add food. Turn the temperature dial to the setting you want, and the indicator light comes on right away. Once the griddle reaches that temperature, the light goes out. During cooking it will switch on and off as the griddle holds its temperature, which is normal.
What temperature range can I use?
You can set the dial anywhere from 200°F to 400°F. The time and temperature chart suggests 325°F to 350°F for bacon and sausage and 350°F for most other foods. Pancakes and steaks use 400°F. For the longest life of the ceramic coating, medium to low heat is preferred. If you need a higher setting, preheat on medium for a few minutes first.
Can I use cooking spray on the griddle?
No. Cooking sprays can build up on the cooking plates and hurt the ceramic nonstick performance. Before the first use, coat the surface with vegetable shortening instead and remove any excess with a paper towel.
Can I put the griddle in the dishwasher?
No, the griddle itself is not dishwasher safe. Wash it by hand in hot soapy water, rinse, and dry it with a towel. The drip tray is the one part listed as dishwasher safe. Never put the cord, plug, or temperature control probe in water or any other liquid. Wipe the probe with a damp, soft cloth and dry it completely.
What should I do about stains or stuck-on food?
For stuck-on food, loosen it with a plastic cleaning pad and avoid hard scouring. For stains, sprinkle baking soda on the stained area and add a little water to make a paste. Let it stand for a few minutes, and never more than an hour. Then rub gently with a soft damp cloth or a plastic scouring pad, wipe clean, and dry well. You can repeat this once if needed. Do not use steel wool, metal scouring pads, or abrasive cleaners.
What utensils are safe to use on the ceramic surface?
Use nylon, plastic, wooden, or rubber utensils. Do not cut food on the griddle, and do not stack objects on the cooking plates, since both can scratch the coating.
What should I do if the griddle malfunctions while I’m cooking?
Turn the unit off and unplug the cord right away, then remove the temperature control probe. Do not keep using the griddle or try to repair it yourself. The griddle has no user-serviceable parts, and any servicing beyond cleaning must be done by a qualified appliance repair technician. If it is still under warranty, call Customer Service at 1-866-832-4843.
How do I get warranty service?
Call 1-866-832-4843 and keep your original sales receipt handy, since proof of purchase is required. A representative will first try to solve the problem by phone. If that does not work, you will get a case number and instructions to send the tagged product, with the receipt, to SENSIO Inc. with shipping and insurance prepaid.
