Lenovo IdeaPad 1 14IAU7
The Lenovo IdeaPad 1 14IAU7 is a 14-inch Windows laptop from the IdeaPad 1 series. Its 355.6 mm (14 inch) screen comes in HD (1366 × 768 pixels), Full HD (1920 × 1080 pixels) or Full HD IPS (1920 × 1080 pixels) versions. The front has a camera with a slide-over privacy cover, and the keyboard combines function keys with hotkeys for volume, brightness, airplane mode, the camera and more. Power comes from a 42 Wh, 3-cell battery that charges through a 65 W ac power adapter. The ports include USB 3.2 Gen 1 Type-A, USB 2.0, USB-C, HDMI 1.4, an SD card slot and a combo audio jack. Wi-Fi and Bluetooth are built in, and a fingerprint reader is fitted on selected models. The 14IAU7 uses DDR4 memory with one physical slot and an M.2 solid-state drive. Pressing Fn + Q cycles through performance modes, and a Novo button opens a startup menu for the UEFI/BIOS setup utility, the boot menu and Windows recovery options.
Covered Models and Machine Types
Lenovo publishes one guide for every model in the table below, grouped by machine type (MT). Illustrations may look slightly different from your model, and some accessories, features and software are not available on all models.
| Machine type (MT) | Model names |
| 82R0 | IdeaPad 1 14ADA7, IdeaPad 1 14ADA7 Ua |
| 82R3 | IdeaPad 1 14ALC7, IdeaPad 1 14ALC7 1, IdeaPad 1 14ALC7 2, IdeaPad 14 ALC7 |
| 82VF | IdeaPad 1 14AMN7, IdeaPad 1 14AMN7 Ua, IdeaPad 1 14AMN7 Ub, IdeaPad 1 14AMN7 Uc |
| 82QC | IdeaPad 1 14IAU7, IdeaPad 1 14IAU7 1, IdeaPad 1 14IAU7 2, IdeaPad 14 IAU7 |
| 82V6 | IdeaPad 1 14IGL7, IdeaPad 1 14IGL7 1, IdeaPad 1 14IGL7 2 |
| 82LV | IdeaPad 1 14IJL7, IdeaPad 1 14IJL7 Ua |
| 82R1 | IdeaPad 1 15ADA7, IdeaPad 1 15ADA7 Ua |
| 82R4 | IdeaPad 1 15ALC7, IdeaPad 1 15ALC7 1, IdeaPad 1 15ALC7 2, IdeaPad 15 ALC7 |
| 82VG, 82X5 | IdeaPad 1 15AMN7, IdeaPad 1 15AMN7 Ua, IdeaPad 1 15AMN7 Ub, IdeaPad 1 15AMN7 Uc |
| 82QD | IdeaPad 1 15IAU7, IdeaPad 1 15IAU7 1, IdeaPad 1 15IAU7 2, IdeaPad 15 IAU7 |
| 82V7 | IdeaPad 1 15IGL7, IdeaPad 1 15IGL7 1, IdeaPad 1 15IGL7 2 |
| 82LX | IdeaPad 1 15IJL7, IdeaPad 1 15IJL7 Ua |
| 83B4 | IdeaPad 1 15IRU7, IdeaPad 1 15IRU7 1, IdeaPad 1 15IRU7 2 |
When specifications or settings differ, the guide separates models by the letters in the name (ADA, ALC, AMN, IAU, IGL, IJL and IRU), and by 14-inch and 15-inch size. The 14IAU7 family sits under machine type 82QC.
Computer Controls, Ports and Indicators
This section identifies each part you can see or use on the 14-inch IdeaPad 1 models. Items marked with an asterisk are fitted on selected models only.
Front
| No. | Part | What it does |
| 1 | Wireless antennas | Send and receive radio waves for the built-in wireless LAN (local area network) and Bluetooth module. They are not visible from the outside of the computer. |
| 2 | Microphones | Capture or record sound and voice. |
| 3 | Camera | Captures still and moving images for photos, videos and video chatting. |
| 4 | Camera cover slider | Slide it to cover or uncover the camera lens to help protect your privacy. |
| 5 | Camera light | When the light is on, the camera is in use. |
| 6 | Screen | Displays text, graphics and videos. Selected models support multi-touch. |
If the antennas are closer than 20 cm (< 20 cm) to your body, the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with your computer.
Base
| No. | Part | What it does |
| 1 | Power light | On: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode. |
| 2 | Power button / fingerprint reader* | Press the button to turn on the computer or put it into sleep mode. On models with the fingerprint reader, it also enrolls and reads your fingerprint for user authentication. |
| 3 | Keyboard | Enter characters and interact with programs. It also includes hotkeys and function keys for changing settings and performing tasks quickly. |
| 4 | Touchpad | Performs finger touch and all the functions of a traditional mouse. It also supports multi-touch. |
Left side
| No. | Part | What it does |
| 1 | Power connector | Connects to power with the included power cord and ac power adapter. |
| 2 | Charging light | Solid white: connected to ac power, battery capacity 91%–100%. Solid amber: connected to ac power, battery capacity 1%–90%. Off: not connected to ac power. |
| 3 | USB (3.2 Gen 1) Type-A connector | Connects a USB-compatible device such as a USB keyboard, mouse, storage device or printer. |
| 4 | HDMI 1.4 connector | Connects to a compatible digital audio device or video monitor, such as an HDTV. |
| 5 | USB-C connector | Connects external storage or data devices. An appropriate adapter may be needed. This connector cannot be used to connect external display devices. |
| 6 | Combo audio jack | Connects headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. It does not support standalone external microphones, so if you use a headset, choose one with a single plug. |
Right side
| No. | Part | What it does |
| 1 | Power light | On: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode. |
| 2 | Novo button hole | Press the Novo button to open the Novo Button menu, where you can choose the UEFI/BIOS setup utility, the Boot menu or the Windows startup options screen. |
| 3 | SD card slot | Takes an SD card or a MultiMediaCard (MMC) for data transfer or storage. |
| 4 | USB 2.0 connector | Connects USB-compatible devices such as a USB mouse, storage device or printer. |
Key Specifications
The values below are the ones Lenovo lists for the 14IAU7 family (14-inch, IAU models). Where a specification depends on the model letters, only the IAU value is shown.
Dimensions and screen
| Specification | Value |
| Width | 325.3 mm (12.8 inches) |
| Depth | 216.5 mm (8.5 inches) |
| Thickness | 17.9 mm (0.7 inches) |
| Screen size | 355.6 mm (14 inches) |
| Display resolution | 1366 × 768 pixels (HD model); 1920 × 1080 pixels (FHD model); 1920 × 1080 pixels (FHD IPS model) |
Power adapter and battery
| Specification | Value |
| ac adapter input | 100 V ac–240 V ac, 50 Hz–60 Hz |
| ac adapter output | 20 V dc, 3.25 A |
| ac adapter power | 65 W |
| Battery capacity | 42 Wh |
| Number of cells | 3 |
The battery capacity is the typical or average capacity measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity shown on the product label.
Memory, storage and processor
| Specification | Value |
| Memory type | DDR4 |
| Physical memory slots | 1 |
| Secondary storage | Solid-state drive |
| Storage form factor | M.2 (2242, 2280) |
| Storage bus | PCI Express |
To see the microprocessor in your computer, type system information in the Windows search box and press Enter.
Connectors, security and network
| Feature | Detail |
| Audio | Combo audio connector |
| USB 2.0 | One connector (right side) |
| USB 3.2 Gen 1 Type-A | One connector (left side), up to 5 Gbps |
| USB-C | Power output up to 5 V and 3 A; USB data rate up to 5 Gbps for USB 3.2 Gen 1 |
| HDMI 1.4 | Maximum output 3840 × 2160 at 30 Hz frame rate and 24 bpp (bits per pixel) color depth |
| Memory card slot | SD card or MultiMediaCard (MMC) |
| Keyboard | Function keys, hotkeys, numeric keypad* |
| Security | Fingerprint reader* |
| Network | Bluetooth and wireless LAN adapter |
Actual USB transfer rates depend on the host and peripheral devices, file attributes and system configuration, and will be slower than the listed data rates: 0.48 Gbit/s for USB 2.0 and 5 Gbit/s for USB 3.2 Gen 1.
Operating environment
| Condition | Limit |
| Maximum altitude (without pressurization) | 3048 m (10 000 ft) |
| Operating temperature, up to 2438 m (8000 ft) | 5°C to 35°C (41°F to 95°F) |
| Storage temperature, up to 2438 m (8000 ft) | 5°C to 43°C (41°F to 109°F) |
| Maximum operating temperature above 2438 m (8000 ft), unpressurized | 31.3°C (88°F) |
| Operating relative humidity | 8% to 95% at wet-bulb temperature 23°C (73°F) |
| Storage relative humidity | 5% to 95% at wet-bulb temperature 27°C (81°F) |
When you charge the battery, its temperature must be no lower than 10°C (50°F).
Windows Setup, Lenovo Apps and the Novo Button Menu
The guide’s instructions are written for the Windows operating system and do not apply if you install a different operating system. To change most Windows settings, type the keyword in the Windows search box, select the best match and follow the on-screen instructions.
Basic Windows settings
| Function | What it does | Search for |
| Control Panel | View or change Windows settings, including hardware and software setup. | Control Panel |
| Connect to Wi-Fi networks | Click the network icon in the Windows notification area, then select a network. In some countries or regions, 802.11ax may be disabled by local regulations. | Wi-Fi |
| Airplane mode | Turns all wireless communications on and off. | Airplane mode |
| Night light | Shows warmer screen colors and reduces emitted blue light. | Night light |
| Adjust color temperature | Available once night light is on. Selected Lenovo computers are low blue light certified, tested with night light on and color temperature at the default value of 48. | Night light |
| Windows Updates | Updates download automatically when the computer is online, and you are prompted to restart to install them. You can also check manually. | Windows Updates |
Use Windows Update only to download and install Windows updates. Updates from other sources may include security risks.
Optional settings
| Function | What it does | Search for |
| Enroll your fingerprint | On models with a fingerprint reader, enroll a fingerprint for Windows sign-in. | Sign-in options |
| Touch keyboard | In stand, tent or tablet mode the physical keyboard is disabled and the Windows touch keyboard appears when text input is needed. If it does not, select the touch keyboard icon in the notification area. | Touch keyboard |
Windows help
If the on-screen instructions do not solve a problem, type Get Help or Tips in the Windows search box and press Enter, then describe the problem and select the matching result. You can also visit https://support.microsoft.com.
Lenovo Vantage and Lenovo PC Manager
Both are Lenovo apps for viewing product information and system status, managing device settings, and checking for and performing system updates. Lenovo PC Manager can check for and perform driver updates only. One of the two may be pre-installed, depending on the country or region of purchase. To open it, type its name in the Windows search box and select the match. If neither is installed, Lenovo Vantage is a free download from the Microsoft Store. Features can change with updates and may not be available on all products.
The Novo Button menu
The Novo Button menu appears before the operating system starts. From it you can open the UEFI/BIOS setup utility, the boot device selection menu or the Windows startup options screen. From the Windows startup options screen you can start from a recovery drive, reset your computer or open the advanced options screen.
To open the Novo Button menu:
- Turn off the computer.
- Open the screen and press the Novo button (the Novo button hole on the right side).
As an alternative, turn off the computer and press Fn and the power button together.
Keyboard Hotkeys, Numeric Keypad and Touch Gestures
Keys printed with icons are hotkeys. They can be pressed alone or together with the Fn key to open apps or change settings quickly. The guide shows each function as an icon, so check the icon printed on your keys.
Hotkey functions
- Mute or unmute sound
- Decrease or increase system volume
- Mute or unmute the microphone
- Reload web pages or refresh the screen
- Enable or disable the touchpad
- Turn airplane mode on and off
- Open the Windows Settings app
- Open the Windows Calculator app
- Open the Windows snipping tool
- Display thumbnails of all open apps
- Open a voice assistant app (use with the Fn key; not available in all countries or regions, and your model may not include this hotkey or it may not work)
- Open Lenovo Vantage, Lenovo PC Manager or an app launch bar
- Enable or disable the integrated camera
- Lock the screen
- Switch display devices
- Increase or decrease screen brightness
- Play or pause media playback
- Stop media playback
- Go to the next media file in the playlist or folder
- Go to the previous media file in the playlist or folder
- Turn the keyboard backlight on or off, or adjust its brightness (use with the Fn key)
Hotkey mode
Some hotkeys share keys with the function keys F1 to F12. Hotkey mode is a UEFI/BIOS setting that decides which behavior you get without holding Fn.
| Hotkey mode setting | To use hotkeys | To use function keys |
| Disabled | Hold down Fn and press the hotkey. | Press the function keys directly. |
| Enabled | Press the hotkeys directly. | Hold down Fn and press the function key. |
Hotkeys that do not share keys with function keys are not affected by this setting and should always be used with Fn.
Numeric keypad
Some models have a dedicated numeric keypad on the far right of the keyboard. Press the NumLock key to turn the keypad on or off.
Multi-touch gestures
Selected models have a touch-enabled screen. Not all gestures work in all apps.
| Gesture | Function |
| Tap | Select an item |
| Tap twice quickly | Double-click an item |
| Tap and hold | Right-click an item |
| Pinch | Zoom out |
| Spread | Zoom in |
| Tap from the left edge | View all open apps |
| Tap and hold (right edge, as illustrated) | Display the Action Center of Windows |
Battery, Charging and Power Settings
Check the battery status
The battery status icon is in the Windows notification area. Click it to see the percentage of battery power remaining, view the current power plan, change the power mode and open battery settings. A warning message appears when the battery is low.
Charge the battery
When the remaining battery power is low, connect the computer to ac power. The battery is fully charged in about two to four hours, depending on the battery capacity, the physical environment and whether you are using the computer. Charging is also affected by battery temperature, and the recommended charging range is 10°C (50°F) to 35°C (95°F). You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.
- To maximize battery life, once the battery is fully charged it must discharge to 94% or lower before it will be allowed to recharge.
- To extend battery lifespan, the battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full capacity may not be available until you discharge to as low as 20% and recharge completely. See the power section of Lenovo Vantage for more information.
Set the power button behavior
By default, pressing the power button puts the computer to sleep. To change this in Windows:
- Type Control Panel in the Windows search box and press Enter. Open Control Panel and view by large or small icons.
- Select Power Options, then click Choose what the power button does.
Power plan and sleep settings
A power plan is a collection of power-saving settings that sets idle time-outs for hardware components. The default power plan is Balanced. For the 14IAU7 family (IdeaPad 1 14IAU7, IdeaPad 1 14IAU7 1, IdeaPad 1 14IAU7 2 and IdeaPad 14 IAU7), the default time-outs are:
| Setting | On battery power | Plugged in |
| Turn off the display | After 4 minutes | After 10 minutes |
| Put the computer to sleep | After 4 minutes | After 10 minutes |
To wake the computer from sleep, press the power button or any key on the keyboard. These settings apply to computers with pre-installed Windows. To change them, type power plan in the Windows search box, press Enter and customize the plan to your preference.
Set a performance mode
The computer can run in different performance modes, and performance and power consumption differ between them. Press Fn + Q to cycle through the modes.
UEFI/BIOS Setup Utility, Startup Sequence and Passwords
UEFI/BIOS is the first program that runs when the computer starts. It initializes the hardware and loads the operating system and other programs, and the setup utility lets you change certain UEFI/BIOS settings.
Open the UEFI/BIOS setup utility
- Turn on or restart the computer.
- When the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled, press Fn + F2 instead.
Change the startup sequence
- Open the UEFI/BIOS setup utility.
- Go to the Boot menu.
- Follow the on-screen instructions to change the device order under Boot Priority Order.
To change the startup sequence for one start only, without opening the setup utility, start the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.
Change the hotkey mode
- Open the UEFI/BIOS setup utility.
- Select Configuration > Hotkey Mode and press Enter.
- Change the setting to Disabled or Enabled.
- Select Exit > Exit Saving Changes.
Password types
| Password type | Prerequisite | Use |
| Administrator password | None | Required to start the setup utility. |
| User password | The administrator password must be set. | Can be used to start the setup utility. |
| Master hard disk password | None | Required to start the operating system. |
| User hard disk password | The master hard disk password must be set. | Can be used to start the operating system. |
All passwords set in the setup utility use alphanumeric characters only. If you start the setup utility with the user password, you can change only a few settings.
Set the administrator password
Attention: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security > Set Administrator Password and press Enter.
- Enter a password with only letters and numbers and press Enter.
- Enter the password again and press Enter.
- Select Exit > Exit Saving Changes.
The next time you start the computer, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator or user password to start the computer.
Change or remove the administrator password
Only the administrator can do this.
- Open the setup utility using the administrator password.
- Select Security > Set Administrator Password and press Enter.
- Enter the current password.
- In Enter New Password, type the new password.
- In Confirm New Password, type it again. To remove the password, press Enter in both boxes without typing anything.
- Select Exit > Exit Saving Changes.
Removing the administrator password also removes the user password.
Set the user password
The administrator password must be set first.
- Open the setup utility using the administrator password.
- Select Security > Set User Password and press Enter.
- Enter a password with only letters and numbers, different from the administrator password, and press Enter.
- Enter the password again and press Enter.
- Select Exit > Exit Saving Changes.
Enable the power-on password
The administrator password must be set in advance.
- Open the UEFI/BIOS setup utility.
- Select Security > Power on Password and press Enter.
- Change the setting to Enabled.
- Select Exit > Exit Saving Changes.
After that, a prompt appears every time you turn on the computer, and you must enter the administrator or user password to start it.
Set a hard disk password
Attention: If you forget the hard disk password, Lenovo authorized service personnel cannot reset it or recover data from the hard disk. You must take the computer to Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility. If you start it with the user password, you cannot set a hard disk password.
- Select Security > Set Hard Disk Password and press Enter.
- Follow the on-screen instructions to set the master and user passwords. They must be set at the same time.
- Select Exit > Exit Saving Changes.
Once a hard disk password is set, you must enter the correct password to start the operating system.
Change or remove a hard disk password
- Open the UEFI/BIOS setup utility and select Security.
- To change or remove the master password, select Change Master Password and press Enter. Removing the master hard disk password also removes the user hard disk password.
- To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
- Select Exit > Exit Saving Changes.
Safety, Care and Support
Avoid constant contact with hot sections
Caution: When the computer is operating, place it on a hard, flat surface so its bottom is not in contact with your bare skin. Under normal operating conditions the bottom surface stays within the range defined in IEC 62368-1, but it can still be hot enough to cause discomfort or harm if touched directly for over one minute at a time. Avoid prolonged direct contact with the bottom of the computer.
If liquid spills on the computer
- Carefully unplug the ac power adapter and turn off the computer immediately. The faster you stop current from passing through the computer, the more likely you are to reduce damage from short circuits. You might lose some data or work by turning it off, but leaving it on might make the computer unusable.
- Wait until you are certain that all the liquid is dry before turning the computer on.
Caution: Do not try to drain liquid out by turning the computer over. If your computer has keyboard drainage holes on the bottom, the liquid will drain out through them.
Customer replaceable units (CRUs)
CRUs are parts that customers can upgrade or replace. For this product, the power cord and the ac power adapter are listed as self-service CRUs. Any part not listed, including the built-in rechargeable battery, must be replaced by a Lenovo-authorized repair facility or technician (see https://support.lenovo.com/partnerlocation).
If you install a CRU, Lenovo ships it to you. You might have to return the defective part. In that case, return instructions, a prepaid shipping label and a container come with the replacement, and you might be charged for the replacement CRU if Lenovo does not receive the defective part within thirty (30) days of your receipt of the replacement. For full details, see the Lenovo Limited Warranty at https://www.lenovo.com/warranty/llw_02.
Contact Lenovo
If you have tried to correct a problem yourself and still need help, call the Lenovo Customer Support Center during the warranty period. Before you call, record:
- The product name, machine type and serial number. The product name and serial number can usually be found on the bottom of the computer, either printed on a label or etched on the cover.
- Whether the problem is continuous or intermittent, any error message or code, the operating system and version, the software that was running, and whether the problem can be reproduced and how.
Support phone numbers by country or region are at https://pcsupport.lenovo.com/supportphonelist. Numbers can change without notice, and if there is none for your country or region, contact your Lenovo reseller or Lenovo marketing representative.
Services available during the warranty period are problem determination, Lenovo hardware repair and engineering change management. Services that are not covered include replacement or use of parts not made for or by Lenovo or nonwarranted parts, identification of software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, changes or upgrades to device drivers, installation and maintenance of network operating systems (NOS), and installation and maintenance of programs. Warranty terms are in the Safety and Warranty Guide that comes with your computer. Extra services can be purchased during and after the warranty period at https://pcsupport.lenovo.com/warrantyupgrade, and availability and service names vary by country or region.
For Quebec consumers, Lenovo does not guarantee the availability of replacement parts, repair services or the information needed to maintain or repair the goods. Current details are at https://support.lenovo.com/ca/en.
Self-help resources
| Need | Where to go |
| Troubleshooting and common questions | https://www.lenovo.com/tips and https://forums.lenovo.com |
| Accessibility information | https://www.lenovo.com/accessibility |
| Lenovo recovery options | https://support.lenovo.com/HowToCreateLenovoRecovery |
| Windows recovery options | Go to https://pcsupport.lenovo.com, detect your computer or select the model manually, then click Diagnostics > Operating System Diagnostics and follow the on-screen instructions. |
| Drivers, firmware, hardware settings, hardware diagnostics, warranty status | Lenovo Vantage or Lenovo PC Manager (search for it in Windows), and https://support.lenovo.com |
| Product documentation (Generic Safety and Compliance Notices, Safety and Warranty Guide, Setup Guide, User Guide, Regulatory Notice) | At https://support.lenovo.com, detect or select your model, then choose Documentation and filter |
| Disk partitioning | https://support.lenovo.com/solutions/ht503851 |
Frequently Asked Questions
How do I turn on the IdeaPad 1 14IAU7 or put it to sleep?
Press the power button. When the computer is off, pressing it turns the computer on, and when it is on, pressing it puts the computer into sleep mode by default. The power light shows the state: on means the computer is on, blinking means sleep, and off means the computer is off or in hibernation. To wake it from sleep, press the power button or any key. If you would rather the button do something else, open Control Panel, choose Power Options and click Choose what the power button does.
What do the charging light colors mean?
The charging light next to the power connector tells you whether the laptop is on ac power and roughly how full the battery is. Solid white means it is connected to ac power and the battery is at 91%–100%. Solid amber means it is connected to ac power and the battery is at 1%–90%. If the light is off, the computer is not connected to ac power.
How long does it take to charge the battery?
A full charge takes about two to four hours, though the actual time depends on the battery capacity, the physical environment and whether you are using the computer while it charges. Battery temperature matters too: the recommended range for charging is 10°C (50°F) to 35°C (95°F). You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.
Why won’t the battery recharge as soon as it drops a little from full?
This is a battery-life feature. Once the battery is fully charged, it must discharge to 94% or lower before it is allowed to recharge. The battery may also adjust its full charge capacity to match how you use it. After a long period of light use, full capacity may not be available until you discharge to as low as 20% and then recharge completely. Lenovo Vantage has more detail in its power section.
How do I open the UEFI/BIOS setup utility?
Turn on or restart the computer, and when the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled on your computer, press Fn + F2 instead. You can also reach it from the Novo Button menu: with the computer off, open the screen and press the Novo button, or press Fn and the power button together, then choose the setup utility.
How do I start the computer from a different device?
For a one-time change, start the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears. To change the order permanently, open the UEFI/BIOS setup utility, go to the Boot menu and change the order under Boot Priority Order by following the on-screen instructions. The Novo Button menu also offers a boot device selection menu.
Why do the F1–F12 keys act as hotkeys, or the other way around?
It depends on the hotkey mode setting in UEFI/BIOS. With hotkey mode disabled, you hold Fn and press a hotkey to use it, and the function keys work when pressed directly. With it enabled, hotkeys work when pressed directly and the function keys need Fn. To switch, open the setup utility, select Configuration > Hotkey Mode, choose Disabled or Enabled, then select Exit > Exit Saving Changes. Hotkeys that do not share a key with a function key always need Fn.
Can I connect an external monitor to the USB-C port?
No. The USB-C connector is for external storage or data devices and cannot be used to connect external display devices. Use the HDMI 1.4 connector on the left side instead, which supports a maximum output resolution of 3840 × 2160 at 30 Hz with 24 bpp color depth. To change which screen shows the picture, use the hotkey for switching display devices.
What should I do if the computer stops responding?
Press and hold the power button until the computer turns off, then restart it.
What should I do if I spill liquid on the laptop?
Unplug the ac power adapter carefully and turn the computer off right away, because stopping current quickly lowers the chance of damage from short circuits. Then wait until you are certain all the liquid is dry before turning it on again. Do not turn the computer upside down to drain it. If your model has keyboard drainage holes on the bottom, the liquid will drain through them.
What happens if I forget the administrator or hard disk password?
Neither can be reset by Lenovo authorized service personnel. For a forgotten administrator password, the system board must be replaced. For a forgotten hard disk password, the hard disk drive must be replaced and the data cannot be recovered. In both cases you must take the computer to Lenovo authorized service personnel, bring proof of purchase and expect a charge for parts and service, so choose passwords you will remember.
Where can I get the latest drivers and UEFI/BIOS updates?
Open Lenovo Vantage or Lenovo PC Manager from the Windows search box, or visit the Lenovo Support website at https://support.lenovo.com. Lenovo Vantage can download and install the latest drivers and firmware, while Lenovo PC Manager can check for and install driver updates.
