Lenovo IdeaPad 1 14IGL7
The Lenovo IdeaPad 1 14IGL7 is a 14-inch Windows laptop that runs on a 42 Wh, 3-cell battery and charges from a 45 W adapter rated 20 V dc, 2.25 A. Depending on configuration, it has a 1366 × 768 (HD) or 1920 × 1080 (FHD or FHD IPS) screen, DDR4 memory with one physical slot, and eMMC secondary storage. Connections include a USB 3.2 Gen 1 Type-A port, a USB 2.0 port, a USB-C connector, an HDMI 1.4 output, an SD card slot, and a combo audio jack. The camera has a privacy cover slider. A fingerprint reader is available on selected models. Everyday settings are handled through Windows, Lenovo Vantage or Lenovo PC Manager, and the Novo Button menu. Startup order, hotkey mode, and passwords are set in the UEFI/BIOS setup utility.
Models and Machine Types Covered
This Lenovo guide covers the IdeaPad 1 series models below. Illustrations in the guide may look slightly different from your model, and the guide may describe accessories, features, and software that are not available on every model. The instructions are based on the Windows operating system and do not apply if you install and use another operating system. This page focuses on the IdeaPad 1 14IGL7 (machine type 82V6). Where a value differs by model family, the table notes it.
| Model name | Machine type (MT) |
| IdeaPad 1 14ADA7, IdeaPad 1 14ADA7 Ua | 82R0 |
| IdeaPad 1 14ALC7, IdeaPad 1 14ALC7 1, IdeaPad 1 14ALC7 2, IdeaPad 14 ALC7 | 82R3 |
| IdeaPad 1 14AMN7, IdeaPad 1 14AMN7 Ua, IdeaPad 1 14AMN7 Ub, IdeaPad 1 14AMN7 Uc | 82VF |
| IdeaPad 1 14IAU7, IdeaPad 1 14IAU7 1, IdeaPad 1 14IAU7 2, IdeaPad 14 IAU7 | 82QC |
| IdeaPad 1 14IGL7, IdeaPad 1 14IGL7 1, IdeaPad 1 14IGL7 2 | 82V6 |
| IdeaPad 1 14IJL7, IdeaPad 1 14IJL7 Ua | 82LV |
| IdeaPad 1 15ADA7, IdeaPad 1 15ADA7 Ua | 82R1 |
| IdeaPad 1 15ALC7, IdeaPad 1 15ALC7 1, IdeaPad 1 15ALC7 2, IdeaPad 15 ALC7 | 82R4 |
| IdeaPad 1 15AMN7, IdeaPad 1 15AMN7 Ua, IdeaPad 1 15AMN7 Ub, IdeaPad 1 15AMN7 Uc | 82VG, 82X5 |
| IdeaPad 1 15IAU7, IdeaPad 1 15IAU7 1, IdeaPad 1 15IAU7 2, IdeaPad 15 IAU7 | 82QD |
| IdeaPad 1 15IGL7, IdeaPad 1 15IGL7 1, IdeaPad 1 15IGL7 2 | 82V7 |
| IdeaPad 1 15IJL7, IdeaPad 1 15IJL7 Ua | 82LX |
| IdeaPad 1 15IRU7, IdeaPad 1 15IRU7 1, IdeaPad 1 15IRU7 2 | 83B4 |
The product name and serial number can usually be found on the bottom of the computer, either printed on a label or etched on the cover.
Ports, Lights, and Controls
Front: Camera, Microphones, and Screen
- Wireless antennas: Send and receive radio waves for the built-in wireless LAN and Bluetooth module. They are not visible from the outside. If the antennas are close to your body (less than 20 cm), the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with the computer.
- Microphones: Capture or record sound and voice.
- Camera: Captures still and moving images for photos, video recording, and video chat.
- Camera cover slider: Move the slider to cover or uncover the camera lens to help protect your privacy.
- Camera light: When the light is on, the camera is in use.
- Screen: Displays text, graphics, and videos. Selected models support multi-touch.
Base: Power Button, Keyboard, and Touchpad
- Power light: On means the computer is turned on. Off means it is turned off or in hibernation mode. Blinking means it is in sleep mode.
- Power button/fingerprint reader (selected models): Press the button to turn on the computer or put it into sleep mode. On models with the fingerprint reader, you can also enroll and read your fingerprint for user authentication.
- Keyboard: Includes hotkeys and function keys for changing settings and performing tasks quickly.
- Touchpad: Performs finger touch and all the functions of a traditional mouse. It also supports multi-touch.
Left Side
| Item | Function |
| Power connector | Connects to power with the included power cord and ac power adapter. |
| Charging light | Solid white: connected to ac power, battery capacity 91%–100%. Solid amber: connected to ac power, battery capacity 1%–90%. Off: not connected to ac power. |
| USB (3.2 Gen 1) Type-A connector | Connects a USB-compatible device such as a keyboard, mouse, storage device, or printer. |
| HDMI 1.4 connector | Connects to a compatible digital audio device or video monitor, such as an HDTV. |
| USB-C connector | Connects external storage or data devices. An appropriate adapter may be needed. This connector cannot be used to connect external display devices. |
| Combo audio jack | Connects headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. It does not support standalone external microphones. If you use a headset, choose one with a single plug. |
Right Side
| Item | Function |
| Power light | On means the computer is turned on. Off means turned off or in hibernation mode. Blinking means sleep mode. |
| Novo button hole | Press the Novo button to open the Novo Button menu, where you can choose the UEFI/BIOS setup utility, the Boot menu, or the Windows startup options screen. |
| SD card slot | Accepts an SD card or a MultiMediaCard (MMC) for data transfer or storage. |
| USB 2.0 connector | Connects USB-compatible devices such as a mouse, storage device, or printer. |
Features and Specifications
Size, Power Adapter, and Battery
| Item | Specification (14-inch IGL7 models) |
| Dimensions | Width 325.3 mm (12.8 inches); depth 216.5 mm (8.5 inches); thickness 17.9 mm (0.7 inches) |
| ac power adapter input | 100 V ac–240 V ac, 50 Hz–60 Hz |
| ac power adapter output | 20 V dc, 2.25 A |
| Adapter power | 45 W (IGL and IJL models) |
| Battery pack | 42 Wh, 3 cells |
The battery capacity is the typical or average capacity measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity shown on the product label. Other model families in this guide, such as ADA, ALC, AMN, IAU, and IRU, use a 20 V dc, 3.25 A, 65 W adapter, so do not assume that rating applies to the IGL7.
Processor, Memory, and Storage
- Microprocessor: To view the microprocessor information, type system information in the Windows search box and press Enter.
- Memory: DDR4, with 1 physical slot.
- Secondary storage: For IGL models, an embedded multimedia card (eMMC), which is the form factor as well. Other model families can use an M.2 solid-state drive.
Screen and Keyboard
- Screen size: 355.6 mm (14 inches).
- Display resolution, depending on configuration: 1366 × 768 pixels (HD model), 1920 × 1080 pixels (FHD model), or 1920 × 1080 pixels (FHD IPS model).
- Keyboard: Function keys, hotkeys, and a numeric keypad on selected models.
Connectors, Security, and Network
- Audio: Combo audio jack.
- USB 2.0 connector and USB (3.2 Gen 1) Type-A connector.
- USB-C connector: Power output up to 5 V and 3 A; USB data transfer rate up to 5 Gbps for USB 3.2 Gen 1.
- HDMI 1.4 connector: Supports a maximum output resolution of 3840 × 2160 at a 30 Hz frame rate and a color depth of 24 bpp (bits per pixel).
- Memory card slot.
- Security: Fingerprint reader on selected models.
- Network: Bluetooth and a wireless LAN adapter.
USB Transfer Rates
Actual transfer rates depend on the processing capability of the host and peripheral devices, file attributes, and other factors related to system configuration and operating environment. Real-world speed will be slower than the data rates below.
| USB device | Data rate (Gbit/s) |
| 2.0 | 0.48 |
| 3.2 Gen 1 | 5 |
Operating Environment
| Condition | Limit |
| Maximum altitude (without pressurization) | 3048 m (10 000 ft) |
| Operating temperature, up to 2438 m (8000 ft) | 5°C to 35°C (41°F to 95°F) |
| Storage temperature, up to 2438 m (8000 ft) | 5°C to 43°C (41°F to 109°F) |
| Maximum operating temperature above 2438 m (8000 ft), unpressurized | 31.3°C (88°F) |
| Operating relative humidity | 8% to 95% at wet-bulb temperature 23°C (73°F) |
| Storage relative humidity | 5% to 95% at wet-bulb temperature 27°C (81°F) |
When you charge the battery, its temperature must be no lower than 10°C (50°F).
Hot Surface Caution
CAUTION: When the computer is operating, place it on a hard and flat surface, with its bottom area not in contact with your bare skin. Under normal operating conditions, the bottom surface temperature stays within an acceptable range defined in IEC 62368-1. Even so, it can be high enough to cause discomfort or harm if touched directly for over one minute at a time. Avoid prolonged direct contact with the bottom of the computer.
Getting Started with Windows
To configure a Windows setting, type the corresponding keyword in the Windows search box, select the best match, and follow the on-screen instructions.
Common Windows Settings
| Function | What it does | Search keyword |
| Control Panel | View or change Windows settings, including hardware and software setup and configuration. | Control Panel |
| Connect to Wi-Fi networks | On models with a wireless LAN module, click the network icon in the Windows notification area and select a network. The wireless LAN module may support different standards, and in some countries or regions 802.11ax may be disabled by local regulations. | Wi-Fi |
| Airplane mode | Turns all wireless communications on and off, for example when boarding an airplane. | Airplane mode |
| Night light mode | Shows warmer screen colors and reduces emitted blue light. Enabling it reduces the chances of developing eye fatigue or eye strain. | Night light |
| Adjust color temperature | Available when night light is on. Selected Lenovo computers are low blue light certified, tested with night light on and color temperature at the default value of 48. | Night light |
| Windows Updates | Updates that apply to your Windows version download automatically when the computer is connected to the Internet. When prompted, restart to install them. You can also check manually. | Windows Updates |
| Enroll your fingerprint | On models with a fingerprint reader, enroll your fingerprint for Windows sign-in. | Sign-in options |
Attention: Use only Windows Update to download and install Windows updates. Updates downloaded from other sources may include security risks.
Lenovo Vantage and Lenovo PC Manager
Both are Lenovo apps. With either one you can view product information and system status, manage and change device settings, and check for and perform system updates. In Lenovo PC Manager, the update check is for driver updates, and some management features are available only in Lenovo Vantage. Depending on the country or region where the computer was purchased, one of the apps may be pre-installed. To open it, type its name in the Windows search box and select the match. If neither is pre-installed, you can install one yourself. Lenovo Vantage is a free download from the Microsoft Store. App features may change with updates and may not be available on all Lenovo products.
Windows Help
If the on-screen instructions do not solve a problem, type Get Help or Tips in the Windows search box and press Enter. When the app opens, type the problem description and select the matching result. You can also visit https://support.microsoft.com and search there.
Power, Battery, and Performance Mode
Check the Battery Status
The battery status icon appears in the Windows notification area. Click it to see the percentage of battery power remaining, view the current power plan, change the power mode, and reach battery settings. A warning message appears when the battery is low.
Charge the Battery
When the remaining battery power is low, connect the computer to ac power. The battery is fully charged in about two to four hours, depending on battery capacity, the physical environment, and whether you are using the computer. The recommended temperature range for charging is between 10°C (50°F) and 35°C (95°F). You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.
- To maximize battery life, once the battery is fully charged it must discharge to 94% or lower before it is allowed to recharge again.
- To extend battery lifespan, the battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full capacity may not be available until you discharge to as low as 20% and recharge completely. See the power section of Lenovo Vantage for more information.
Set Power Button Behavior
By default, pressing the power button puts the computer to sleep. To change this in Windows Control Panel:
- Type Control Panel in the Windows search box and press Enter. Open the control panel and view by large or small icons.
- Select the power options, then click Choose what the power button does.
To wake the computer from sleep, press the power button or any key on the keyboard.
Default Power Plan Timeouts
A power plan is a collection of power-saving settings that sets idle time-outs for hardware components. The default plan is Balanced. The settings below are for the IdeaPad 1 14IGL7, 14IGL7 1, and 14IGL7 2 (they are the same for the 14IJL7 models). They apply on battery power or when plugged in.
| Setting | Default timeout |
| Turn off the display | After 10 minutes, on battery power or plugged in |
| Put the computer to sleep | After 30 minutes, on battery power or plugged in |
To change or customize a power plan on a computer with pre-installed Windows, type power plan in the Windows search box, press Enter, and customize the plan to your preference.
Set Performance Mode
The computer can work in different performance modes, and performance and power consumption vary by mode. Press Fn + Q to cycle through the modes.
Keyboard Hotkeys and Function Keys
Some keys are printed with icons. These hotkeys can be pressed alone or together with the Fn key to open apps or change settings quickly. The icon printed on each key shows its function.
Hotkey Functions
| Function | Notes |
| Mute or unmute sound | |
| Decrease or increase system volume | |
| Mute or unmute the microphone | |
| Reload web pages or refresh the screen | |
| Enable or disable the touchpad | |
| Turn airplane mode on and off | |
| Open the Windows Settings app | |
| Open the Windows Calculator app | |
| Open the Windows snipping tool | |
| Display thumbnails of all open apps | |
| Open a voice assistant app | Must be used with the Fn key. Not available in all countries or regions, and your model may not include this hotkey or it may not be functional. |
| Open Lenovo Vantage, Lenovo PC Manager, or an app launch bar | |
| Enable or disable the integrated camera | |
| Lock the screen | |
| Switch display devices | |
| Increase or decrease screen brightness | |
| Play or pause media playback | |
| Stop media playback | |
| Go to the next media file in the playlist or folder | |
| Go to the previous media file in the playlist or folder | |
| Turn the keyboard backlight on or off, or adjust its brightness | Must be used with the Fn key. |
Hotkey Mode
Some hotkeys share keys with function keys (F1 to F12). Hotkey mode is a UEFI/BIOS setting that changes how they are used.
| Hotkey mode setting | How to use hotkeys | How to use function keys |
| Disabled | Hold down Fn and press one of the hotkeys. | Press the function keys directly. |
| Enabled | Press the hotkeys directly. | Hold down Fn and press one of the function keys. |
Hotkeys that do not share keys with function keys are not affected by this setting and should always be used with the Fn key.
Numeric Keypad
Some Lenovo computers include a dedicated numeric keypad on the far right of the keyboard for entering numbers and operators quickly. Press the NumLock key to enable or disable it.
Novo Button Menu
The Novo Button menu can be displayed before the operating system starts. From it you can open the UEFI/BIOS setup utility, open the boot device selection menu, or open the Windows startup options screen. From the Windows startup options screen you can then start the computer from a recovery drive, reset the computer, or open the advanced options screen.
Open the Novo Button Menu
- Turn off the computer.
- Open the LCD screen and press the Novo button (on the right side of the computer).
Alternatively, with the computer turned off, press Fn and the power button to open the menu.
UEFI/BIOS Setup Utility
UEFI/BIOS is the first program that runs when a computer starts. It initializes hardware components and loads the operating system and other programs. Your computer may include a setup utility that lets you change certain UEFI/BIOS settings.
Open the UEFI/BIOS Setup Utility
- Turn on or restart the computer.
- When the Lenovo logo appears on the screen, press F2 repeatedly. If hotkey mode is enabled, press Fn + F2.
Change the Startup Sequence
Change the startup sequence if you need the computer to start from another device or a network location.
- Open the UEFI/BIOS setup utility.
- Go to the Boot menu.
- Follow the on-screen instructions to change the order of devices under Boot Priority Order.
To change the startup sequence temporarily without opening the setup utility, start the computer and, when the Lenovo logo appears, press F12 (or Fn + F12) repeatedly.
Change Hotkey Mode
- Open the UEFI/BIOS setup utility.
- Select Configuration ➙ Hotkey Mode and press Enter.
- Change the setting to Disabled or Enabled.
- Select Exit ➙ Exit Saving Changes.
Passwords in the UEFI/BIOS Setup Utility
All passwords set in the setup utility consist of alphanumeric characters only. If you start the setup utility with the user password, you can change only a few settings.
Password Types
| Password type | Prerequisite | Usage |
| Administrator password | None | You must enter it to start the setup utility. |
| User password | The administrator password must be set. | You can use it to start the setup utility. |
| Master hard disk password | None | You must enter it to start the operating system. |
| User hard disk password | The master hard disk password must be set. | You can use it to start the operating system. |
Set an Administrator Password
An administrator password prevents unauthorized access to the setup utility.
Attention: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required, and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security ➙ Set Administrator Password and press Enter.
- Enter a password that contains only letters and numbers, then press Enter.
- Enter the password again and press Enter.
- Select Exit ➙ Exit Saving Changes.
The next time you start the computer, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator password or the user password to start the computer.
Change or Remove the Administrator Password
Only the administrator can change or remove the administrator password.
- Open the UEFI/BIOS setup utility using the administrator password.
- Select Security ➙ Set Administrator Password and press Enter.
- Enter the current password.
- In the Enter New Password box, enter the new password.
- In the Confirm New Password box, enter the new password again. To remove the password instead, press Enter in both boxes without entering any character.
- Select Exit ➙ Exit Saving Changes.
If you remove the administrator password, the user password is also removed.
Set a User Password
Set the administrator password first. The administrator may want to set a user password for others to use.
- Open the UEFI/BIOS setup utility using the administrator password.
- Select Security ➙ Set User Password and press Enter.
- Enter a password that contains only letters and numbers, then press Enter. The user password must be different from the administrator password.
- Enter the password again and press Enter.
- Select Exit ➙ Exit Saving Changes.
Enable the Power-On Password
If the administrator password has been set, you can enable the power-on password for greater security.
- Open the UEFI/BIOS setup utility.
- Select Security ➙ Power on Password and press Enter. The administrator password must be set in advance.
- Change the setting to Enabled.
- Select Exit ➙ Exit Saving Changes.
When the power-on password is enabled, a prompt appears every time you turn on the computer, and you must enter the administrator or user password to start it.
Set a Hard Disk Password
A hard disk password prevents unauthorized access to your data.
Attention: Be extremely careful when setting a hard disk password. If you forget it, Lenovo authorized service personnel cannot reset the password or recover data from the hard disk. You must take the computer to Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required, and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security ➙ Set Hard Disk Password and press Enter. If you started the setup utility with the user password, you cannot set a hard disk password.
- Follow the on-screen instructions to set both the master and user passwords. They must be set at the same time.
- Select Exit ➙ Exit Saving Changes.
Once a hard disk password is set, you must provide the correct password to start the operating system.
Change or Remove a Hard Disk Password
- Open the UEFI/BIOS setup utility.
- Select Security.
- To change or remove the master password, select Change Master Password and press Enter. If you remove the master hard disk password, the user hard disk password is also removed. To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
- Select Exit ➙ Exit Saving Changes.
Troubleshooting, Recovery, and Support
If the Computer Stops Responding
Press and hold the power button until the computer turns off, then restart it.
If You Spill Liquid on the Computer
- Carefully unplug the ac power adapter and turn off the computer immediately. The more quickly you stop the current from passing through the computer, the more likely you are to reduce damage from short circuits. Although you might lose some data or work by turning off the computer immediately, leaving it on might make it unusable.
- Wait until you are certain all the liquid is dry before turning the computer on.
CAUTION: Do not try to drain the liquid by turning the computer over. If your computer has keyboard drainage holes on the bottom, the liquid will drain out through the holes.
Drivers, UEFI/BIOS Updates, and Recovery
- The latest device drivers and UEFI/BIOS are available from Lenovo Vantage or Lenovo PC Manager, and from the Lenovo Support website at https://support.lenovo.com.
- To partition your storage drive, see https://support.lenovo.com/solutions/ht503851.
- To reset or restore Windows with Lenovo recovery options, go to https://support.lenovo.com/HowToCreateLenovoRecovery and follow the on-screen instructions.
- To use Windows recovery options, go to https://pcsupport.lenovo.com, detect your computer or select your model manually, click Diagnostics ➙ Operating System Diagnostics, and follow the on-screen instructions.
- Lenovo Vantage or Lenovo PC Manager can also download and install the latest drivers and firmware, configure hardware settings, diagnose hardware problems, and check warranty status (use Windows Search to find them).
Customer Replaceable Units (CRUs)
CRUs are parts that customers can upgrade or replace. For this product, the power cord and the ac power adapter are self-service CRUs. Replace any part not listed, including the built-in rechargeable battery, only through a Lenovo-authorized repair facility or technician. See https://support.lenovo.com/partnerlocation for more information. If you intend to install a CRU, Lenovo ships it to you, and you might need to return the defective part. Where a return is required, return instructions, a prepaid shipping label, and a container come with the replacement CRU, and you might be charged for the replacement if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement CRU. Full details are in the Lenovo Limited Warranty at https://www.lenovo.com/warranty/llw_02.
Contact Lenovo
If you have tried to correct a problem yourself and still need help, you can call the Lenovo Customer Support Center during the warranty period. Phone numbers for your country or region are at https://pcsupport.lenovo.com/supportphonelist and may change without notice. Before you call, record:
- Product name, machine type, and serial number (usually on a label or etched on the bottom of the computer).
- What the problem is, and whether it is continuous or intermittent.
- Any error message or error code.
- The operating system and version, and the software applications that were running.
- Whether the problem can be reproduced, and if so, how.
Services available during the warranty period include problem determination, Lenovo hardware repair for problems caused by Lenovo hardware under warranty, and engineering change management. Services not covered include replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts, identification of software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, changes or upgrades to device drivers, installation and maintenance of network operating systems, and installation and maintenance of programs. Warranty terms are in the “Warranty information” section of the Safety and Warranty Guide that comes with the computer. During and after the warranty period you can buy additional services at https://pcsupport.lenovo.com/warrantyupgrade, and service availability and names vary by country or region.
For Quebec consumers, Lenovo does not guarantee the availability of replacement parts, repair services, or the information needed to maintain or repair the goods. Up-to-date information is at https://support.lenovo.com/ca/en.
Frequently Asked Questions
How do I open the Novo Button menu on the Lenovo IdeaPad 1 14IGL7?
Turn the computer off, open the screen, and press the Novo button. The button sits in a small hole on the right side of the computer, next to the SD card slot. If you prefer, you can instead turn the computer off and press Fn and the power button together. The menu lets you open the UEFI/BIOS setup utility, the boot device selection menu, or the Windows startup options screen.
What do the charging light colors mean on the IdeaPad 1 14IGL7?
The charging light on the left side tells you whether ac power is connected and roughly how full the battery is. Solid white means the computer is connected to ac power and the battery is at 91%–100%. Solid amber means it is connected and the battery is at 1%–90%. If the light is off, the computer is not connected to ac power.
How long does the IdeaPad 1 14IGL7 take to charge, and why won’t it charge when the battery is nearly full?
A full charge takes about two to four hours, depending on battery capacity, the surrounding environment, and whether you are using the computer while it charges. The battery charges best between 10°C (50°F) and 35°C (95°F). If the battery is full or close to it, charging may not restart right away: to maximize battery life, a fully charged battery must discharge to 94% or lower before it is allowed to recharge.
What power adapter does the IdeaPad 1 14IGL7 use?
The IGL models use an ac power adapter with an output of 20 V dc, 2.25 A, rated at 45 W, with an input of 100 V ac–240 V ac at 50 Hz–60 Hz. Several other IdeaPad 1 models covered by the same guide use a 65 W adapter rated 20 V dc, 3.25 A, so check the rating that matches your model. The power cord and the ac power adapter are both self-service customer replaceable units.
How do I open the BIOS setup or change the boot order on the IdeaPad 1 14IGL7?
To open the UEFI/BIOS setup utility, turn on or restart the computer and press F2 repeatedly as soon as the Lenovo logo appears. If hotkey mode is enabled, press Fn + F2 instead. To change the permanent startup order, go to the Boot menu and follow the on-screen instructions under Boot Priority Order. For a one-time change, restart the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.
How do I use the F1 to F12 keys without holding Fn?
Change the hotkey mode in the UEFI/BIOS setup utility. Open the utility, select Configuration ➙ Hotkey Mode, press Enter, and set it to Disabled, then select Exit ➙ Exit Saving Changes. With hotkey mode disabled, the function keys work when pressed directly and the hotkeys need Fn. Setting it to Enabled reverses that behavior. Hotkeys that do not share a key with a function key always need Fn.
What should I do if my IdeaPad 1 14IGL7 stops responding?
Press and hold the power button until the computer turns off, then restart it.
What should I do if I spill liquid on my IdeaPad 1 14IGL7?
Act quickly. Carefully unplug the ac power adapter and turn the computer off immediately, because stopping the current sooner makes short-circuit damage less likely. You might lose some unsaved work, but leaving the computer on could make it unusable. Then wait until you are certain all the liquid is dry before turning it on again. Do not turn the computer over to drain the liquid. If your computer has keyboard drainage holes on the bottom, the liquid will drain through them.
Can I connect an external monitor to the USB-C port on the IdeaPad 1 14IGL7?
No. The USB-C connector is for external storage or data devices and cannot be used to connect external display devices. Use the HDMI 1.4 connector on the left side instead. It supports a maximum output resolution of 3840 × 2160 at a 30 Hz frame rate and 24 bpp color depth. Press the display-switching hotkey to switch display devices once a monitor is connected.
Can I use a standalone microphone with the headphone jack?
No. The combo audio jack accepts headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug, but it does not support standalone external microphones. If you use a headset, choose one with a single plug.
What happens if I forget my administrator or hard disk password?
Lenovo authorized service personnel cannot reset either password, so set them carefully. For a forgotten administrator password, you must take the computer to Lenovo authorized service personnel to have the system board replaced. For a forgotten hard disk password, the hard disk drive must be replaced and the data cannot be recovered. In both cases, proof of purchase is required and a fee is charged for parts and service.
How do I switch performance modes on the IdeaPad 1 14IGL7?
Press Fn + Q to cycle through the available performance modes. Performance and power consumption differ from mode to mode, so choose the one that fits what you are doing. You can also check the battery status icon in the Windows notification area to view the current power plan and change the power mode.
