Lenovo IdeaPad 1 15IGL7

IdeaPad 1 15IGL7

Lenovo IdeaPad 1 15IGL7 user guide: ports, hotkeys, charging lights, power settings, Novo button, UEFI/BIOS setup, passwords and support.
Supporting Models: IdeaPad 1 14ADA7, IdeaPad 1 14ADA7 Ua, IdeaPad 1 14ALC7, IdeaPad 1 14ALC7 1, IdeaPad 1 14ALC7 2, IdeaPad 14 ALC7, IdeaPad 1 14AMN7, IdeaPad 1 14AMN7 Ua, IdeaPad 1 14AMN7 Ub, IdeaPad 1 14AMN7 Uc, IdeaPad 1 14IAU7, IdeaPad 1 14IAU7 1, IdeaPad 1 14IAU7 2, IdeaPad 14 IAU7, IdeaPad 1 14IGL7, IdeaPad 1 14IGL7 1, IdeaPad 1 14IGL7 2, IdeaPad 1 14IJL7, IdeaPad 1 14IJL7 Ua, IdeaPad 1 15ADA7, IdeaPad 1 15ADA7 Ua, IdeaPad 1 15ALC7, IdeaPad 1 15ALC7 1, IdeaPad 1 15ALC7 2, IdeaPad 15 ALC7, IdeaPad 1 15AMN7, IdeaPad 1 15AMN7 Ua, IdeaPad 1 15AMN7 Ub, IdeaPad 1 15AMN7 Uc, IdeaPad 1 15IAU7, IdeaPad 1 15IAU7 1, IdeaPad 1 15IAU7 2, IdeaPad 15 IAU7, IdeaPad 1 15IGL7, IdeaPad 1 15IGL7 1, IdeaPad 1 15IGL7 2, IdeaPad 1 15IJL7, IdeaPad 1 15IJL7 Ua, IdeaPad 1 15IRU7, IdeaPad 1 15IRU7 1, IdeaPad 1 15IRU7 2 (machine types 82R0, 82R3, 82VF, 82QC, 82V6, 82LV, 82R1, 82R4, 82VG, 82X5, 82QD, 82V7, 82LX, 83B4)
English

Read The User Guide (Second Edition, June 2025) (PDF) Online

View the original document directly below. For safety-critical procedures, follow the manufacturer’s instructions for your exact model.

Lenovo IdeaPad 1 15IGL7

The Lenovo IdeaPad 1 15IGL7 is a 15-inch, Windows-based laptop from the IdeaPad 1 series. Its 381.0 mm (15-inch) screen comes in HD (1366 × 768), FHD (1920 × 1080) and FHD IPS (1920 × 1080) versions, and it has a built-in camera with a privacy slider, wireless LAN and Bluetooth. Power comes from a 42 Wh, three-cell battery and a 45 W ac adapter. The ports include USB 3.2 Gen 1 Type-A, USB 2.0, a USB-C connector for data and power output, HDMI 1.4, an SD card slot and a combo audio jack. A Novo button opens the menu for UEFI/BIOS setup, the boot menu and Windows startup options, and Fn + Q cycles through performance modes. The fingerprint reader and numeric keypad are available on selected models only. The IdeaPad 1 15IGL7 family is machine type 82V7, and the same guide also covers the 15IGL7 1 and 15IGL7 2 variants.

Controls, Lights and Ports

Use this section to find each part of the computer and to read the status lights. Illustrations in the original guide may look slightly different from your exact configuration.

Front

PartWhat it does
Wireless antennasSend and receive radio waves for the built-in wireless LAN (local area network) and Bluetooth module. They are not visible from the outside of the computer. If the antennas are close to your body (less than 20 cm), the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with the computer.
MicrophonesCapture or record sound and voice.
CameraCaptures still and moving images for photos, videos and video chats.
Camera cover sliderSlide it to cover or uncover the camera lens. The cover helps protect your privacy.
Camera lightWhen the light is on, the camera is in use.
ScreenDisplays text, graphics and videos. Selected models support multi-touch.

Base: Keyboard Area

PartWhat it does
Power lightOn: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode.
Power button / fingerprint reader (selected models only)Press the button to turn on the computer or put it into sleep mode. On models with the fingerprint reader, you can also enroll and read your fingerprint for user authentication.
KeyboardEnter characters and interact with programs. It also includes hotkeys and function keys for changing settings and performing tasks quickly.
TouchpadPerforms finger touch and all the functions of a traditional mouse. It also supports multi-touch.

Left Side

PartWhat it does
1. Power connectorConnect to power with the included power cord and ac power adapter.
2. Charging lightSolid white: connected to ac power, battery capacity 91%–100%. Solid amber: connected to ac power, battery capacity 1%–90%. Off: not connected to ac power.
3. USB (3.2 Gen 1) Type-A connectorConnect a USB-compatible device, such as a USB keyboard, mouse, storage device or printer.
4. HDMI 1.4 connectorConnect to a compatible digital audio device or video monitor, such as an HDTV.
5. USB-C connectorConnect external storage or data devices. An appropriate adapter may be needed for connecting external devices. This connector cannot be used to connect external display devices.
6. Combo audio jackConnect headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. This jack does not support standalone external microphones. If you use a headset, choose one with a single plug.

Right Side

PartWhat it does
1. Power lightOn: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode.
2. Novo button holePress the Novo button to open the Novo Button menu. From the menu, you can open the UEFI/BIOS setup utility, the Boot menu or the Windows startup options screen.
3. SD card slotInsert an SD card or a MultiMediaCard (MMC) for data transfer or storage.
4. USB 2.0 connectorConnect USB-compatible devices, such as a USB mouse, storage device or printer.

Features and Specifications

The values below are the ones that apply to the 15-inch IGL models. Some features, such as the fingerprint reader and numeric keypad, are available on selected models only.

Hardware Specifications

ItemSpecification
Dimensions (15-inch models)Width: 360.2 mm (14.2 inches). Depth: 236 mm (9.3 inches). Thickness: 17.9 mm (0.7 inches).
ac power adapter input100 V ac–240 V ac, 50 Hz–60 Hz
ac power adapter output (IGL models)20 V dc, 2.25 A
ac power adapter power (IGL models)45 W
Battery packCapacity: 42 Wh. Number of cells: 3.
MicroprocessorTo view processor information, type system information in the Windows search box and press Enter.
MemoryType: DDR4. Number of physical slots: 1.
Secondary storage (IGL models)Embedded multimedia card (eMMC)
Screen size381.0 mm (15 inches)
Display resolution1366 × 768 pixels (HD model). 1920 × 1080 pixels (FHD model). 1920 × 1080 pixels (FHD IPS model).
KeyboardFunction keys, hotkeys, and a numeric keypad (selected models)
SecurityFingerprint reader (selected models)
NetworkBluetooth and a wireless LAN adapter

The battery capacity is the typical or average capacity measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity shown on the product label.

The FHD IPS OnCell Touch display option is listed in the guide for the ALC, AMN, IAU and IRU 15-inch models. It is not listed for the IGL models.

Connectors and Slots

ConnectorDetails
Audio connectorCombo audio jack
USB 2.0 connectorData rate 0.48 Gbit/s
USB (3.2 Gen 1) Type-A connectorData rate 5 Gbit/s
USB-C connectorPower output up to 5 V and 3 A. USB data transfer rate up to 5 Gbps for USB 3.2 Gen 1.
HDMI 1.4 connectorMaximum output resolution of 3840 × 2160 at a 30 Hz frame rate and a color depth of 24 bpp (bits per pixel).
Memory card slotSD card or MultiMediaCard (MMC)

The actual transfer rate on any USB connector varies with the processing capability of the host and peripheral devices, file attributes, and system configuration, and it will be slower than the listed data rate.

Operating Environment

ConditionLimit
Maximum altitude (without pressurization)3048 m (10 000 ft)
Temperature up to 2438 m (8000 ft)Operating: 5°C to 35°C (41°F to 95°F). Storage: 5°C to 43°C (41°F to 109°F).
Temperature above 2438 m (8000 ft)Maximum operating temperature under the unpressurized condition: 31.3°C (88°F).
Battery charging temperatureThe battery temperature must be no lower than 10°C (50°F) when you charge it.
Relative humidity, operating8% to 95% at wet-bulb temperature 23°C (73°F)
Relative humidity, storage5% to 95% at wet-bulb temperature 27°C (81°F)

Getting Started with Windows

To change a Windows setting, type the matching keywords in the Windows search box, select the best match, and follow the on-screen instructions.

Common Windows Settings

SettingWhat it doesSearch for
Control PanelView or change Windows settings, including hardware and software setup and configuration.Control Panel
Connect to Wi-FiClick the network icon in the Windows notification area, then select a network. The wireless LAN module may support different standards, and in some countries or regions 802.11ax may be disabled under local regulations.Wi-Fi
Airplane modeTurns all wireless communication on and off. You may need it when boarding an airplane.Airplane mode
Night lightShows warmer screen colors and reduces the blue light the screen emits. Enabling it reduces the chance of eye fatigue or eye strain.Night light
Adjust color temperatureWith night light on, you can change the color temperature. Selected low-blue-light-certified computers are tested with night light on and the color temperature at the default value of 48.Night light
Windows UpdatesWindows downloads applicable updates automatically when the computer is online, then prompts you to restart to install them. You can also check for updates manually.Windows Updates
Enroll your fingerprintOn models with a fingerprint reader, enroll a fingerprint for Windows sign-in.Sign-in options

Attention: Use only Windows Update to download and install Windows updates. Updates from other sources may include security risks.

If the on-screen instructions do not solve a problem, type Get Help or Tips in the Windows search box and press Enter, then describe the problem in the app that opens. You can also search the Microsoft support website at https://support.microsoft.com.

Lenovo Vantage and Lenovo PC Manager

Both are Lenovo apps. Using either one, you can view product information and system status, manage and change device settings, and check for and perform updates. System updates are available only in Lenovo Vantage, while Lenovo PC Manager can check for and perform driver updates.

Depending on the country or region where the computer was purchased, one of the two apps may be pre-installed. To open it, type its name in the Windows search box and select the match. If neither is pre-installed, you can install one yourself. Lenovo Vantage is a free download from the Microsoft Store. App features can change with updates and may not be available on all Lenovo products.

The Novo Button Menu

The Novo Button menu appears before the operating system starts. From it, you can open the UEFI/BIOS setup utility, open the boot device selection menu, or open the Windows startup options screen. From the Windows startup options screen, you can start the computer from a recovery drive, reset the computer, or open the advanced options screen.

To open the Novo Button menu:

  1. Turn off the computer.
  2. Open the screen and press the Novo button (the Novo button hole is on the right side).

As an alternative, turn off the computer and press Fn and the power button together to open the Novo Button menu.

Keyboard Hotkeys and Hotkey Mode

Some keys are printed with icons. These hotkeys can be pressed alone or together with the Fn key to open apps or change settings quickly. The icon printed on each key shows its function.

Hotkey Functions

Hotkey functionNotes
Mute or unmute sound
Decrease or increase system volume
Mute or unmute the microphone
Reload web pages or refresh the screen
Enable or disable the touchpad
Turn airplane mode on and off
Open the Windows Settings app
Open the Windows Calculator app
Open the Windows snipping tool
Display thumbnails of all open apps
Open a voice assistant appMust be used with the Fn key. The voice assistant app is not available in all countries or regions, and your model may not include this hotkey or it may not be functional.
Open Lenovo Vantage, Lenovo PC Manager, or an app launch bar
Enable or disable the integrated camera
Lock the screen
Switch display devices
Increase or decrease screen brightness
Play or pause media playback
Stop media playback
Go to the next media file in the playlist or folder
Go to the previous media file in the playlist or folder
Turn the keyboard backlight on or off, or adjust its brightnessMust be used with the Fn key.

Hotkey Mode

Some hotkeys share keys with the function keys (F1 to F12). Hotkey mode is a UEFI/BIOS setting that changes how hotkeys and function keys are used.

Hotkey mode settingTo use a hotkeyTo use a function key
DisabledHold down the Fn key and press the hotkey.Press the function key directly.
EnabledPress the hotkey directly.Hold down the Fn key and press the function key.

Hotkeys that do not share keys with function keys are not affected by this setting and must always be used with the Fn key. To change the setting, see the UEFI/BIOS section below.

Numeric Keypad

Models with a numeric keypad have it on the far right of the keyboard for entering numbers and operators quickly. Press the NumLock key to enable or disable it.

Managing Power

Check the Battery Status

The battery status icon is in the Windows notification area. Click it to see the percentage of battery power remaining, view the current power plan, change the power mode and open battery settings. Windows shows a warning message when the battery is low.

Charge the Battery

When the battery is low, connect the computer to ac power. The battery is fully charged in about two to four hours, depending on the battery capacity, the physical environment and whether you are using the computer. The recommended temperature range for charging is 10°C (50°F) to 35°C (95°F). You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.

  • To maximize battery life, once the battery is fully charged it must discharge to 94% or lower before it is allowed to recharge.
  • To extend battery lifespan, the battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full capacity may not be available until you discharge to as low as 20% and recharge completely. See the power section of Lenovo Vantage for details.

The charging light on the left side shows the state: solid white means ac power is connected and the battery is at 91%–100%, solid amber means ac power is connected and the battery is at 1%–90%, and off means ac power is not connected.

Change What the Power Button Does

By default, pressing the power button puts the computer to sleep. To change this in Windows Control Panel:

  1. Type Control Panel in the Windows search box and press Enter. Open the control panel and view by large or small icons.
  2. Select the power options, then click choose what the power button does.

Power Plan and Default Time-Outs

A power plan is a collection of power-saving settings that sets idle time-outs for hardware components. The default power plan is Balanced. For the IdeaPad 1 15IGL7, 15IGL7 1 and 15IGL7 2, these defaults apply:

SettingPlugged inOn battery power
Turn off the displayAfter 10 minutesAfter 10 minutes
Put the computer to sleepAfter 30 minutesAfter 30 minutes

To wake the computer from sleep, press the power button or any key on the keyboard. To customize a power plan on a computer with pre-installed Windows, type power plan in the Windows search box, press Enter, and adjust the plan to your preference.

Performance Mode

The computer can work in different performance modes, and performance and power consumption vary between them. Press Fn + Q to cycle through the modes.

UEFI/BIOS Setup Utility and Passwords

UEFI/BIOS is the first program that runs when the computer starts. It initializes the hardware and loads the operating system, and its setup utility lets you change certain UEFI/BIOS settings.

Open the UEFI/BIOS Setup Utility

  1. Turn on or restart the computer.
  2. When the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled, press Fn + F2 instead.

You can also reach the setup utility from the Novo Button menu.

Change the Startup Sequence

  1. Open the UEFI/BIOS setup utility.
  2. Go to the Boot menu.
  3. Follow the on-screen instructions to change the order of devices under Boot Priority Order.

To change the startup sequence for one start only, without opening the setup utility, start the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.

Change Hotkey Mode

  1. Open the UEFI/BIOS setup utility.
  2. Select Configuration, then Hotkey Mode, and press Enter.
  3. Change the setting to Disabled or Enabled.
  4. Select Exit, then Exit Saving Changes.

Password Types

Password typePrerequisiteUse
Administrator passwordNoneMust be entered to start the setup utility.
User passwordThe administrator password must be set.Can be used to start the setup utility.
Master hard disk passwordNoneMust be entered to start the operating system.
User hard disk passwordThe master hard disk password must be set.Can be used to start the operating system.

All passwords set in the setup utility consist of letters and numbers only. If you start the setup utility with the user password, you can change only a few settings.

Set an Administrator Password

Attention: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required, and a fee is charged for parts and service.

  1. Open the UEFI/BIOS setup utility.
  2. Select Security, then Set Administrator Password, and press Enter.
  3. Enter a password that contains only letters and numbers, then press Enter.
  4. Enter the password again and press Enter.
  5. Select Exit, then Exit Saving Changes.

From then on, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator or user password to start the computer.

Change or Remove the Administrator Password

Only the administrator can do this.

  1. Open the setup utility using the administrator password.
  2. Select Security, then Set Administrator Password, and press Enter.
  3. Enter the current password.
  4. In the Enter New Password box, enter the new password.
  5. In the Confirm New Password box, enter the new password again. To remove the password instead, press Enter in both boxes without typing any character.
  6. Select Exit, then Exit Saving Changes.

If you remove the administrator password, the user password is removed too.

Set a User Password

The administrator password must be set first.

  1. Open the setup utility using the administrator password.
  2. Select Security, then Set User Password, and press Enter.
  3. Enter a password that contains only letters and numbers, then press Enter. It must be different from the administrator password.
  4. Enter the password again and press Enter.
  5. Select Exit, then Exit Saving Changes.

Enable the Power-On Password

The administrator password must be set in advance. When the power-on password is enabled, a prompt appears every time you turn on the computer, and you must enter the administrator or user password to start it.

  1. Open the UEFI/BIOS setup utility.
  2. Select Security, then Power on Password, and press Enter.
  3. Change the setting to Enabled.
  4. Select Exit, then Exit Saving Changes.

Set a Hard Disk Password

Attention: Be extremely careful when setting a hard disk password. If you forget it, Lenovo authorized service personnel cannot reset it or recover data from the hard disk. You must take the computer to Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required, and a fee is charged for parts and service.

  1. Open the UEFI/BIOS setup utility. If you start it with the user password, you cannot set a hard disk password.
  2. Select Security, then Set Hard Disk Password, and press Enter.
  3. Follow the on-screen instructions to set both the master and user passwords. They must be set at the same time.
  4. Select Exit, then Exit Saving Changes.

Once a hard disk password is set, you must enter the correct password to start the operating system.

Change or Remove a Hard Disk Password

  1. Open the UEFI/BIOS setup utility.
  2. Select Security.
  3. To change or remove the master password, select Change Master Password and press Enter. Removing the master hard disk password also removes the user hard disk password. To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
  4. Select Exit, then Exit Saving Changes.

Safety and Care

Avoid Constant Contact with Hot Areas

CAUTION: While the computer is operating, place it on a hard, flat surface so its bottom is not in contact with bare skin. Under normal operating conditions the bottom surface stays within the range defined in IEC 62368-1, but it can still be hot enough to cause discomfort or harm if touched directly for more than one minute at a time. Avoid prolonged direct contact with the bottom of the computer.

Spilled Liquid

If liquid spills on the computer:

  1. Carefully unplug the ac power adapter and turn off the computer immediately. The sooner you stop current from passing through the computer, the more likely you are to reduce damage from short circuits. You might lose some data or work by turning it off immediately, but leaving it on might make the computer unusable.
  2. Wait until you are certain all the liquid has dried before turning the computer on.

CAUTION: Do not try to drain the liquid by turning the computer over. If your computer has keyboard drainage holes on the bottom, the liquid will drain through them.

Environment and Updates

Keep the computer within the temperature, humidity and altitude limits listed under Operating Environment above, and charge the battery only when it is at 10°C (50°F) or warmer. Install Windows updates only through Windows Update.

Before using the computer, read the Generic Safety and Compliance Notices, the Safety and Warranty Guide and the Setup Guide that come with it. The Generic Safety and Compliance Notices are also available at https://pcsupport.lenovo.com/docs/generic_notices.

Troubleshooting, Support and Replaceable Parts

Common Problems

ProblemWhat to do
The computer stops respondingPress and hold the power button until the computer turns off, then restart it.
Liquid was spilled on the computerSee Spilled Liquid in the safety section above.
You need the latest drivers and UEFI/BIOSUse Lenovo Vantage or Lenovo PC Manager, or go to https://support.lenovo.com.
You want to partition the storage driveGo to https://support.lenovo.com/solutions/ht503851.

Self-Help Resources

NeedWhere to look
Troubleshooting and frequently asked questionshttps://www.lenovo.com/tips and https://forums.lenovo.com
Accessibility informationhttps://www.lenovo.com/accessibility
Reset or restore Windows with Lenovo recovery optionsGo to https://support.lenovo.com/HowToCreateLenovoRecovery and follow the on-screen instructions.
Reset or restore Windows with Windows recovery optionsGo to https://pcsupport.lenovo.com, detect your computer or select the model manually, click Diagnostics, then Operating System Diagnostics, and follow the on-screen instructions.
Download drivers and firmware, configure hardware, diagnose hardware problems, check warranty statusUse Lenovo Vantage or Lenovo PC Manager (find it with Windows Search).
Product documentation (Generic Safety and Compliance Notices, Safety and Warranty Guide, Setup Guide, User Guide, Regulatory Notice)Go to https://support.lenovo.com, detect or select your model, choose Documentation, and filter for the document you want.
Windows helpUse Get Help or Tips, Windows Search, or https://support.microsoft.com.

Customer Replaceable Units (CRUs)

CRUs are parts that customers can upgrade or replace. For this product, the power cord and the ac power adapter are self-service CRUs. Any part not listed, including the built-in rechargeable battery, must be replaced by a Lenovo-authorized repair facility or technician (see https://support.lenovo.com/partnerlocation).

If you install a CRU yourself, Lenovo ships it to you. You may have to return the defective part. When a return is required, return instructions, a prepaid shipping label and a container come with the replacement CRU, and you may be charged for the replacement if Lenovo does not receive the defective CRU within thirty (30) days of your receipt of the replacement. See the Lenovo Limited Warranty at https://www.lenovo.com/warranty/llw_02 for full details.

Contact Lenovo

If you have tried to fix the problem yourself and still need help, call the Lenovo Customer Support Center during the warranty period. Phone numbers for your country or region are listed at https://pcsupport.lenovo.com/supportphonelist, and they can change without notice.

Before you call, record this information:

  • Product name, machine type and serial number (usually on a label or etched on the bottom of the computer).
  • What the problem is, and whether it is continuous or intermittent.
  • Any error message or error code.
  • The operating system and version, and which software was running at the time.
  • Whether the problem can be reproduced, and how.

During the warranty period, available services are problem determination, Lenovo hardware repair under warranty, and engineering change management. Services not covered include replacement or use of non-Lenovo or nonwarranted parts, identifying software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, device driver changes or upgrades, installation and maintenance of network operating systems, and installation and maintenance of programs. The warranty terms are in the Safety and Warranty Guide that comes with the computer. You can buy additional services at https://pcsupport.lenovo.com/warrantyupgrade.

Frequently Asked Questions

What do the charging light colors mean on the IdeaPad 1 15IGL7?

The charging light sits on the left side, next to the power connector. A solid white light means the computer is connected to ac power and the battery is between 91% and 100%. A solid amber light means it is connected to ac power and the battery is between 1% and 90%. If the light is off, the computer is not connected to ac power.

What power adapter does the IdeaPad 1 15IGL7 use?

The IGL models use a 45 W ac power adapter. It accepts 100 V ac to 240 V ac at 50 Hz to 60 Hz and delivers 20 V dc at 2.25 A. The same guide lists 65 W, 3.25 A adapters for other model families (ADA, ALC, AMN, IAU and IRU), so check the rating on your own adapter against the IGL figures. The ac power adapter and power cord are self-service customer replaceable units.

How long does the battery take to charge, and what temperature is best?

A full charge takes about two to four hours. The actual time depends on the battery capacity, the surroundings and whether you are using the computer while it charges. Charge the battery between 10°C (50°F) and 35°C (95°F); the battery temperature must be no lower than 10°C (50°F) when charging. Once the battery is full, it has to discharge to 94% or lower before it will recharge again, which helps extend battery life. You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.

How do I open the Novo Button menu?

Turn the computer off, open the screen, and press the Novo button, which is a small hole on the right side of the computer. You can also turn the computer off and press Fn and the power button together. The menu lets you open the UEFI/BIOS setup utility, the boot device selection menu or the Windows startup options screen. From the Windows startup options screen you can start from a recovery drive, reset the computer or open the advanced options screen.

How do I open UEFI/BIOS setup or change the startup order?

Turn the computer on or restart it, and press F2 repeatedly when the Lenovo logo appears. If hotkey mode is enabled, press Fn + F2 instead. To change the startup order permanently, open the Boot menu in the setup utility and follow the on-screen instructions to reorder the devices under Boot Priority Order, then choose Exit and Exit Saving Changes. For a one-time change, press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.

How do I switch between hotkeys and standard function keys?

This is controlled by the hotkey mode setting in UEFI/BIOS. Open the setup utility, select Configuration, then Hotkey Mode, and press Enter. Set it to Disabled if you want to press function keys directly and use Fn for hotkeys, or Enabled if you want to press hotkeys directly and use Fn for function keys. Finish with Exit and Exit Saving Changes. Hotkeys that do not share a key with F1 to F12 are not affected by this setting and must always be used with Fn.

How do I change what the power button does?

By default, pressing the power button puts the computer to sleep. To change this, type Control Panel in the Windows search box and press Enter, open the control panel in large or small icons view, select the power options, and click choose what the power button does. To wake the computer from sleep, press the power button or any key.

What should I do if the computer stops responding?

Press and hold the power button until the computer turns off, then start it again.

What should I do if I spill liquid on the computer?

Unplug the ac power adapter carefully and turn the computer off immediately, because stopping the current quickly reduces the chance of short-circuit damage. You may lose unsaved work, but leaving the computer on could make it unusable. Do not turn it on again until you are certain the liquid has completely dried. Do not turn the computer over to drain the liquid; if your computer has keyboard drainage holes on the bottom, the liquid drains through them.

Can I connect an external monitor to the USB-C port?

No. The USB-C connector is for external storage or data devices and cannot be used to connect external display devices. To use an external display or HDTV, use the HDMI 1.4 connector on the left side, which supports a maximum output resolution of 3840 × 2160 at 30 Hz with 24 bpp color depth. An appropriate adapter may be needed for some external devices on the USB-C port, which supports data transfer up to 5 Gbps and power output up to 5 V and 3 A.

What happens if I forget the administrator or hard disk password?

Neither password can be reset by Lenovo authorized service personnel. If you forget the administrator password, the computer must be taken to Lenovo authorized service personnel to have the system board replaced. If you forget the hard disk password, they also cannot recover data from the hard disk, and the hard disk drive must be replaced. Both repairs require proof of purchase and a fee for parts and service, so be extremely careful when setting these passwords. Passwords set in the setup utility can contain only letters and numbers.

Which parts can I replace myself?

The power cord and the ac power adapter are self-service CRUs that you can install or replace yourself. Any part not listed as a CRU, including the built-in rechargeable battery, must be replaced by a Lenovo-authorized repair facility or technician. If you install a CRU, Lenovo ships it to you, and you may need to return the defective part within thirty (30) days of receiving the replacement to avoid being charged for it.

Found something that needs correcting?

If a model number, instruction, specification, or document link looks incorrect, please send us the page URL and relevant details.