Razer Viper Wired Gaming Mouse
The Razer Viper is an ultra-light, ambidextrous gaming mouse with a 5G Advanced Optical Sensor rated for true 16,000 DPI. It weighs 69 g excluding the cable and uses Razer Optical Mouse Switches with a 70 million-click life cycle. It has eight independently programmable Hyperesponse buttons, 1000 Hz Ultrapolling, a gaming-grade tactile scroll wheel and an ultra-flexible Razer Speedflex cable. A DPI toggle on the underside steps through sensitivity stages, and Razer Synapse 3 handles button assignments, DPI stages, polling rate, Chroma lighting and surface calibration. Up to five profiles can be stored on the mouse for use even on computers without Synapse 3.
Controls and Parts
Parts Identification
| Label | Part |
|---|---|
| A | Left mouse button |
| B | Right mouse button |
| C | Scroll wheel |
| D | Mouse button 5 |
| E | Mouse button 4 |
| F | Ultraslick mouse feet |
| G | True 16,000 DPI 5G optical sensor |
| H | DPI indicator |
| I | DPI cycle button |
DPI Stages and the DPI Indicator
Press the DPI cycle button (I) on the underside to change DPI stages. The DPI indicator (H) shows the active stage by color:
| DPI | Indicator color |
|---|---|
| 400 | Red |
| 800 | Green |
| 1800 (default) | Blue |
| 2400 | Cyan |
| 3200 | Yellow |
You can create up to 5 custom sensitivity stages in Razer Synapse 3.
Key Specifications
| Specification | Detail |
|---|---|
| Sensor | Razer 5G Advanced Optical Sensor with true 16,000 DPI |
| Tracking | Up to 450 inches per second (IPS) / 50 G acceleration |
| Polling rate | 1000 Hz Ultrapolling |
| Buttons | Eight independently programmable Hyperesponse buttons |
| DPI toggle | On the underside of the mouse |
| Switches | Razer Optical Mouse Switches with 70 million-click life cycle |
| Scroll wheel | Gaming-grade tactile scroll wheel |
| Cable | Ultra-flexible Razer Speedflex cable, 2.1 m / 6.89 ft |
| Design | Ergonomic ambidextrous design |
| Lighting | Razer Chroma lighting with 16.8 million customizable color options |
| Software | Razer Synapse 3 enabled |
| Length | 127 mm / 5.0 in |
| Width | 66 mm / 2.60 in |
| Height | 38 mm / 1.50 in |
| Weight | 69 g / 0.152 lbs (excluding cable) |
What You Need
The mouse needs a PC with a free USB port. To use Razer Synapse 3 you need Windows 7 64-bit (or higher), an internet connection and 500 MB of free hard disk space.
Installing Razer Synapse 3
- Connect the mouse to a USB port on your computer.
- Install Razer Synapse 3 when prompted (this prompt applies to Windows 8 or higher), or download the Razer Synapse 3 or Razer Synapse installer from razer.com/synapse.
- Create your Razer ID, or log into Razer Synapse 3 with an existing account.
Customizing with Razer Synapse 3
Synapse and Mouse Tabs
The Synapse tab is the default tab when you first launch Razer Synapse 3, and its Dashboard subtab gives an overview of your Razer devices, modules and online services. The Mouse tab is the main tab for the Razer Viper, where you change button assignment, DPI sensitivity and lighting.
Changes made under the Mouse tab are saved automatically to your system and cloud storage. To store profiles on the mouse’s on-board memory, click the Save button to open the storage slots, then drag and drop the profiles you want to store. The mouse can store up to 5 profiles from Synapse 3, and you can use them even on systems that do not have Synapse 3 installed.
Profiles
A profile stores all of your Razer peripheral settings. By default, the profile name is based on your system’s name. To add, rename, duplicate or delete a profile, press the Miscellaneous button.
Button Assignments
The Customize subtab modifies the mouse’s button assignments. Click the Sidebar button to see all current assignments, or select a button on the Customize tab to jump to it. After selecting a button, you can assign one of these functions:
| Function | What it does |
|---|---|
| Default | Returns the button to its original setting |
| Keyboard Function | Turns the button into a keyboard function; optional Turbo mode emulates repeatedly pressing it while the button is held |
| Mouse Function | Substitutes another mouse function (left click, right click, scroll click, double click, mouse button 4 (browser back), mouse button 5 (browser forward), scroll up/down/left/right, repeat scroll up/down); Turbo mode is available for some |
| Sensitivity | Controls DPI from a button (see below) |
| Macro | Executes a prerecorded sequence of keystrokes and button presses with precise timing |
| Switch Profile | Loads a different profile’s button assignments; an on-screen notification appears when you switch |
| Switch Lighting | Switches from the current lighting effect to a custom lighting effect |
| Razer Hypershift | Activates Hypershift mode while the button is held |
| Launch Program | Opens an app or website; search for an app or enter a web address |
| Multimedia | Volume down/up, mute volume, mic volume up/down, mute mic, mute all, play/pause, previous track, next track |
| Windows 8 Charms | Assigns a Windows 8 shortcut command |
| Windows Shortcuts | Assigns a Windows operating system shortcut command |
| Text Function | Types prewritten text when the button is pressed, with full Unicode support |
| Disable | Makes the button unusable, for example if it interferes with your gaming |
The Sensitivity function offers these options:
- Sensitivity Clutch: Changes to a predefined DPI while the button is held; releasing it returns to the previous sensitivity.
- Sensitivity Stage Up / Down: Raises or lowers the current sensitivity by one stage.
- On-The-Fly Sensitivity: Press the button and move the scroll wheel up or down to raise or lower the current DPI.
- Cycle Up Sensitivity Stages: Raises the stage by one and returns to stage 1 after the highest stage.
- Cycle Down Sensitivity Stages: Lowers the stage by one and returns to the highest stage after stage 1.
Mouse Use and Hypershift
Mouse Use switches the orientation of your primary and secondary mouse functions for left-handed or right-handed users. Hypershift is a secondary set of button assignments that is active while the Hypershift key is held down. By default, the Hypershift key is the FN key of a Razer Synapse 3 supported keyboard, and you can also assign any mouse button as the Hypershift key.
Performance Settings
The Performance subtab controls sensitivity, acceleration and polling rate.
- Sensitivity: A higher DPI makes the cursor travel farther for the same mouse movement.
- Enable X-Y Sensitivity: By default the horizontal and vertical axes share one value. Select this option to set a different value for each axis. It can be used together with sensitivity stages.
- Sensitivity Stages: Create up to 5 preset sensitivity values to cycle through with the stage up/down controls.
- Acceleration: Increases the cursor’s movement speed depending on how quickly you move the mouse. The higher the value, the faster the mouse accelerates.
- Polling Rate: Choose 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms) from the dropdown. A higher rate means the computer receives mouse status updates more often.
- Mouse Properties: Opens the Windows Mouse Properties for operating system settings that can affect the mouse.
Lighting Settings
On the Lighting subtab, toggle Brightness to turn lighting off or use the slider to raise or lower luminance. Switch Off Lighting is a power-saving tool that can disable lighting when your system’s display turns off and/or power the mouse down automatically after it has been idle for a set time.
| Quick effect | Behavior | Setup |
|---|---|---|
| Audio Meter | LEDs light up according to the audio level, with a default spectrum of colors | Select a Color Boost level |
| Breathing | Lighting fades in and out of the selected color(s) | Select up to 2 colors or randomize |
| Reactive | LEDs light up when you click any mouse button | Select the color and how long the LED stays lit |
| Spectrum Cycling | LEDs cycle between 16.8 million colors indefinitely | No further customization required |
| Static | LEDs stay lit in the selected color | Select a color |
To synchronize quick effects with other supported Razer Chroma-enabled devices, click the Chroma Sync button. For Advanced Effects, press the Chroma Studio button to build your own Chroma effect.
Calibration
The Calibration subtab optimizes the sensor for your surface. Click Add A Surface, then choose a Razer mouse mat from the comprehensive list or add your own mouse mat.
Profiles Tab and Linked Games
On the Profiles tab, the Devices subtab shows which Razer device uses each profile. Click the add button to create a profile for the selected device, and use the Miscellaneous button to rename, duplicate or delete one. The Link Games option activates a profile automatically when you run an application. The Linked Games subtab lets you add games, view peripherals linked to games and search added games, and sort by alphabetical order, last played or most played. Added games stay listed even if not linked to a Razer device.
Settings Window
Click the settings button in Razer Synapse 3 to open the Settings window. The General tab sets display language and start-up behavior and lets you view the master guide of connected Razer devices. The Reset tab performs a factory reset on connected Razer devices with on-board memory, and all profiles stored on the selected device’s on-board memory are erased. The About tab shows software information and terms-of-use links, checks for software updates and links to Razer’s social communities.
Safety, Care and Comfort
Safety Guidelines
- If you have trouble operating the mouse and troubleshooting does not work, unplug it and contact the Razer hotline or go to support.razer.com. Do not attempt to service or fix the device yourself at any time.
- Do not take the device apart. Doing so voids your warranty. Do not attempt to operate it under abnormal current loads.
- Keep the device away from liquid, humidity and moisture.
- Operate the device only within 0°C (32°F) to 40°C (104°F). If the temperature goes outside this range, unplug and/or switch off the device and let the temperature stabilize.
Cleaning and Surface Care
Once a month, unplug the mouse from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
For the best movement and control, Razer recommends a premium Razer mouse mat. The sensor is tuned and optimized for Razer mouse mats, and Razer states it has been tested to track best on them. Some surfaces cause undue wear on the mouse feet, which then need constant care and eventual replacement.
Comfort Guidelines
Long periods of repetitive motion, poor peripheral positioning, incorrect body position and poor habits may be associated with physical discomfort and injury to nerves, tendons and muscles. To reduce the risk:
- Position your keyboard and monitor directly in front of you with the mouse next to the keyboard. Keep your elbows at your sides, not too far away, and the keyboard within easy reach.
- Adjust your chair and table height so the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, your posture straight and your shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. For repeated tasks, avoid bending, extending or twisting your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
- Customize the keys on your keyboard to suit your style of gaming and minimize repetitive or awkward motions.
- Do not sit in one position all day. Get up, step away from your desk and stretch your arms, shoulders, neck and legs.
If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back, consult a qualified medical doctor immediately.
Warranty, Registration and Support
The Razer Viper comes with a 2-year limited warranty. Registering at razerid.razer.com unlocks exclusive Razer benefits. The serial number is on a label on the underside of the mouse, marked S/N in the guide’s illustration. For the latest warranty terms, visit razer.com/warranty.
Frequently Asked Questions
How do I install Razer Synapse 3 for the Razer Viper?
Connect the mouse to a USB port on your computer, then install Synapse 3 when your PC prompts you (that prompt applies to Windows 8 or higher). If no prompt appears, download the Razer Synapse 3 or Razer Synapse installer from razer.com/synapse. Finally, create a Razer ID or log in with an existing account. You need Windows 7 64-bit (or higher), an internet connection and 500 MB of free hard disk space.
How do I change the DPI on the Razer Viper, and what do the indicator colors mean?
Press the DPI cycle button on the underside of the mouse to move to the next stage. The DPI indicator color tells you where you are: red for 400, green for 800, blue for 1800 (the default), cyan for 2400 and yellow for 3200. You don’t need Synapse 3 for this button.
Can I customize the DPI stages?
Yes. In Razer Synapse 3, open Mouse > Performance and create up to 5 sensitivity stages, which you then cycle through with the stage up and down controls. Select Enable X-Y Sensitivity if you want different values for horizontal and vertical movement. You can also assign Sensitivity Clutch, On-The-Fly Sensitivity or stage cycling to a mouse button on the Customize subtab.
How do I save my settings on the mouse itself?
Open the Mouse tab in Razer Synapse 3, click the Save button to open the storage slots for the on-board memory, then drag and drop the profiles you want to store. The mouse holds up to 5 profiles from Synapse 3, and they work even on a computer that doesn’t have Synapse 3 installed.
How do I reassign a button or create a macro?
In Synapse 3, open Mouse > Customize and select the button you want to change. You can assign a keyboard function, another mouse function, a sensitivity control, a macro, a profile or lighting switch, Hypershift, a program or website launcher, multimedia controls, Windows shortcuts, typed text or Disable. Choose Default on any button to return it to its original setting. A macro is a prerecorded sequence of keystrokes and button presses executed with precise timing.
What is Hypershift mode on the Razer Viper?
Hypershift is a second set of button assignments that is active only while the Hypershift key is held down. The key defaults to FN on a Razer Synapse 3 supported keyboard, but you can assign any mouse button to it by choosing Razer Hypershift as that button’s function.
Can I use the Razer Viper left-handed?
The mouse has an ambidextrous design. In Synapse 3, the Mouse Use option switches the orientation of your primary and secondary mouse functions to suit left-handed or right-handed users.
How do I change the polling rate?
Open Synapse 3, go to Mouse > Performance, and pick a value from the Polling Rate dropdown: 125Hz (8ms), 500Hz (2ms) or 1000Hz (1ms). A higher polling rate means the computer receives information about the mouse more often, which increases the pointer’s reaction time.
How do I change or turn off the lighting?
On the Synapse 3 Lighting subtab, toggle Brightness to turn lighting off or drag the slider to adjust it. You can also pick a quick effect: Audio Meter, Breathing, Reactive, Spectrum Cycling or Static. Switch Off Lighting can turn lighting off when your display turns off or after the mouse has been idle for a set time.
How do I calibrate the Razer Viper for my mouse mat?
In Synapse 3, go to Mouse > Calibration and click Add A Surface. Pick your Razer mouse mat from the list or add your own. The sensor is tuned for Razer mouse mats, so those are the surfaces it is tested to track best on.
How should I clean the Razer Viper, and what temperatures can it handle?
Once a month, unplug the mouse and wipe it with a soft cloth or cotton swab. Do not use soap or harsh cleaning agents, and keep it away from liquid, humidity and moisture. Use it only between 0°C (32°F) and 40°C (104°F); if it goes outside that range, unplug it until the temperature stabilizes.
