Razer Naga V2 Pro
The Razer Naga V2 Pro is a right-handed wireless gaming mouse built for MMO, battle royale and FPS play. It has three swappable side plates (2, 6 and 12 buttons), 19+1 programmable buttons and a Razer HyperScroll Pro wheel. It connects through Razer HyperSpeed Wireless (2.4 GHz), Bluetooth or a USB Type-C cable. It uses a Razer Focus Pro 30K optical sensor, and Razer Synapse handles button assignments, sensitivity, scroll behavior and lighting. Up to 5 profiles can be stored on the mouse itself.
Parts and Controls
Mouse Layout
| Label | Part |
| A | Left mouse button |
| B | Right mouse button |
| C | Razer HyperScroll Pro wheel |
| D | Left tilt-click |
| E | Right tilt-click |
| F | Scroll mode button |
| G | DPI cycle button |
| H | USB Type C port |
| I | PTFE mouse feet |
| J | Slider switch (Bluetooth mode, Power off mode, Razer HyperSpeed Wireless (2.4 GHz) mode) |
| K | Razer Focus Pro 30K Optical Sensor |
| L | Profile indicator |
| M | Profile button |
| N | Cover puck |
The cover puck is interchangeable with the Razer Wireless Charging Puck for wireless charging through a Razer Mouse Dock Pro. Both are sold separately.
DPI Stages
The default DPI stages are 400, 800, 1600 (default), 3200 and 6400. You can customize them in Razer Synapse.
What Comes in the Box
- Razer Naga V2 Pro
- 12-button side plate (recommended for MMOs)
- 6-button side plate (recommended for battle royales)
- 2-button side plate (recommended for general use)
- USB Type A to USB Type C Speedflex cable
- Razer HyperSpeed Wireless Dongle and USB dongle adapter
- Important Product Information Guide
Specifications and Requirements
Technical Specifications
| Specification | Value |
| Sensor | True 30,000 DPI Focus Pro optical sensor with 99.8% resolution accuracy |
| Maximum speed and acceleration | Up to 750 inches per second (IPS) / 70 G |
| Lift-off / landing distance | Advanced customization |
| Connection modes | HyperSpeed (2.4 GHz), BLE and wired |
| Side panels | 3 interchangeable panels with 2, 6 and 12-button configurations |
| Mouse feet | 100% PTFE, 0.8 mm thick |
| Design | Ergonomic right-handed with textured side-grips |
| Switches | Razer Optical Mouse Switches Gen-3, rated for 90 M clicks |
| On-the-fly sensitivity | Default stages 400/800/1600/3200/6400 |
| On-board memory | 4+1 profiles |
| Software | Razer Synapse 3 enabled |
| Cable | 1.8 m / 6 ft Speedflex cable for charging and wired use |
| Accessories | Compatible with Razer Mouse Dock Pro and Wireless Charging Puck |
What You Need
For the mouse itself, you need a USB Type A port or Bluetooth connectivity. Razer Synapse requires Windows 10 64-bit (or higher) and an internet connection for installation.
Charging and Connecting the Mouse
Charging Before First Use
Plug the charging cable from your PC’s USB port into the mouse. Fully charge the mouse before first use. A depleted battery takes approximately 4 hours to charge fully. Install Razer Synapse when prompted, or download the installer from razer.com/synapse.
Wired Mode
Connect the mouse to any USB port on your PC with the charging cable.
HyperSpeed Wireless (2.4 GHz) Mode
- Plug the wireless dongle into your PC.
- Push the slider switch to Razer HyperSpeed Wireless (2.4 GHz) mode.
The mouse is then ready for wireless use.
Bluetooth Mode
- Push the slider switch to Bluetooth mode.
- Press and hold the scroll wheel, scroll mode and DPI cycle buttons together for three seconds to start pairing mode. The Razer logo blinks twice at repeated intervals while the mouse is in pairing mode.
- Turn on Bluetooth on your device and select “Razer Naga V2 Pro” from the list of devices found.
- Wait until the mouse pairs. The Razer logo briefly turns static blue when it is paired.
Everyday Use
Low Power Indicator
The scroll wheel blinks red twice at repeated intervals when battery power is less than 5%. The pattern repeats until the battery is drained or you connect the mouse to a PC with the charging cable.
Changing the Side Plate
Unplug the mouse before changing a side plate. Pull from the bottom of the side plate to remove it, then fit the plate you want. These plates are made only for the Razer Naga V2 Pro. Do not use side plates designed for other Razer products on this mouse, or the reverse.
Switching Profiles
The mouse stores up to 5 profiles from Razer Synapse, so you can use them on systems without the app installed. Press the profile button to cycle through them. The profile indicator color shows which profile is selected.
| Profile | Designated color |
| Active Profile | White |
| Profile 1 | Red |
| Profile 2 | Green |
| Profile 3 | Blue |
| Profile 4 | Cyan |
Switching Scroll Modes
Press the scroll mode button to cycle through the scroll wheel stages: Standard (default), Distinct, Ultra-fine, Adaptive, Smooth Scroll and Custom. The Custom stage is available only when you enable it in Razer Synapse. In Synapse you can also choose which stages are available, reorder them or build your own.
Configuring the Mouse in Razer Synapse
An internet connection is required for installation, updates and cloud-based features. A Razer ID account is recommended but optional. Features depend on the current software version, the connected devices and supported apps. Changes made under the Mouse tab are saved automatically to your system and cloud storage.
Button Assignments
On the Mouse tab, open the Customize subtab to reassign buttons. A profile stores all of your peripheral’s settings. To add, rename, duplicate or delete a profile, use the Miscellaneous button. Each button can be set to one of these functions:
| Function | What it does |
| Default | Returns the button to its original setting |
| Keyboard Function | Assigns a keyboard function; Turbo mode repeats it while the button is held |
| Mouse Function | Left Click, Right Click, Scroll Click, Double Click, Mouse Button 4 (“Backward” in most browsers), Mouse Button 5 (“Forward”), Scroll Up, Scroll Down, Scroll Left, Scroll Right; Turbo is available on some |
| Scrolling | Cycle up or cycle down the scroll wheel stage |
| Sensitivity | Sensitivity Clutch, Sensitivity Stage Up, Sensitivity Stage Down, On-The-Fly Sensitivity, Cycle Up Sensitivity Stages, Cycle Down Sensitivity Stages |
| Macro | Runs a prerecorded sequence of keystrokes and button presses; visible only when the Macro module is installed |
| Inter-device | Changes the functions of other Synapse-enabled devices, such as using a Razer keyboard to change the mouse’s sensitivity stage |
| Switch Profile | Loads a new set of button assignments and shows an on-screen notification |
| Switch Lighting | Switches between advanced lighting effects; visible only when the Chroma Studio module is installed |
| Razer Hypershift | Activates Hypershift mode while the button is held |
| Launch Program | Opens an app or a website |
| Multimedia | Volume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All, Play / Pause, Previous Track, Next Track |
| Windows Shortcuts | Assigns a Windows shortcut command |
| Text Function | Types prewritten text with full Unicode support |
| Disable | Makes the button unusable |
Sensitivity Clutch changes the sensitivity to a preset DPI while the button is held, then returns to the previous setting. For On-The-Fly Sensitivity, press the assigned button and move the scroll wheel up or down to raise or lower the DPI.
Hypershift and Multi-Device Pairing
Hypershift is a secondary set of button assignments that is active while the Hypershift key is held. By default the Hypershift key is the fn key of a Razer Synapse-supported keyboard, but you can set any mouse button as the Hypershift key.
HyperSpeed Multi-Device Pairing lets the mouse’s dongle pair one additional HyperSpeed-compatible device, since the dongle can support a keyboard and mouse at the same time. The mouse must be connected in HyperSpeed (2.4 GHz) mode to use this. Each peripheral can connect to only one dongle at a time.
Stored Profiles
To assign a profile to an on-board memory slot, click the On-board Profiles button and drag the profile to the slot you want.
Sensitivity and Polling Rate
On the Performance subtab you can create up to 5 sensitivity stages and cycle through them with the stage up or down buttons. Enable X-Y Sensitivity lets you set different values for the horizontal and vertical axes. You can set the polling rate to 125Hz, 500Hz or 1000Hz; a higher rate means the computer receives mouse updates more often. A Mouse Properties link opens the Windows Mouse Properties.
Scroll Wheel Stages
| Scroll mode | Description |
| Standard | Default scroll wheel movement |
| Distinct | Firmer and distinct scrolls for precise weapon switching |
| Ultra-fine | Softer, smoother scrolls with multiple steps for spammable inputs |
| Adaptive | Standard scrolling that adapts to how fast you move the wheel |
| Smooth Scroll | Seamless scroll movement for browsing content |
| Custom | Your preferred scroll resistance and step values; disabled by default |
To build a Custom stage, enable and select it, click CUSTOMIZE, then set your preferred scroll tension and steps. You can drag points on the Scroll Up or Scroll Down curves or use the sliders. Both directions share the same values unless you toggle the Link option off.
Scroll acceleration is available only while Smooth Scroll is active and amplifies wheel movement the faster you rotate it. Browser detection switches the mouse to Smooth Scroll automatically in certain applications, and you can add others with Add an application. The mouse reverts to its previous setting when you leave those applications. For smoother scrolling, enable the High-resolution scrolling option.
Lighting
The Lighting subtab has a Brightness toggle and slider, plus a Switch Off Lighting option that turns lighting off when the system display turns off and/or when the mouse has been idle for a set time. Quick effects:
| Effect | Description | Setup |
| Audio meter | LEDs light up according to the audio level with a default spectrum of colors | Select a Color Boost level |
| Breathing | Lighting fades in and out of the selected color(s) | Select up to 2 colors or randomize colors |
| Reactive | LEDs light up when you click any mouse button | Select a color and a duration |
| Spectrum cycling | Lighting cycles between 16.8 million colors indefinitely | No further customization required |
| Static | LEDs stay lit in the selected color | Select a color |
The Chroma Sync button synchronizes quick effects with other supported Razer Chroma-enabled devices, but only devices that support the selected effect will sync. Advanced Effects let you choose a Chroma Effect, and the Chroma Studio button opens the tool for creating your own.
Calibration and Smart Tracking
The Calibration subtab optimizes the sensor for your surface. Smart Tracking sets the distance at which the sensor stops tracking when you lift the mouse, to avoid unwanted cursor movement. The Tracking Distance slider runs from Low to High. Selecting Enable Asymmetric Cut-Off lets you set different lift-off and landing distances. The same screen gives a manual reset: press and hold the left, right and scroll wheel mouse buttons together for 7 seconds.
Power Settings
The Power subtab has two settings. Wireless Power Saving sets how many minutes idle (1 to 15) before the mouse enters sleep mode. Low Power Mode sets the battery percentage (5 to 100) below which the mouse enters Low Power Mode when wireless.
Profiles Tab and Linked Games
The Profiles tab manages all profiles. You can import profiles from your computer or the cloud, add new ones with the add button, and rename, duplicate, export or delete them with the Miscellaneous button. In Linked Games you can add games, sort them alphabetically, by last played or by most played, and link each game to a device profile or Chroma Effect so it launches automatically during play.
Global Shortcuts
Global Shortcuts on the Synapse tab bind operations or Synapse functions to custom key combinations. They apply across all device profiles. Only Razer Synapse-enabled device inputs are recognized.
Settings and Factory Reset
The Settings window controls startup behavior, display language, theme and notifications, and lets you sync profiles to the cloud or view the master guides of connected devices. The Reset tab performs a factory reset on connected Razer devices with on-board memory and can also reset the Synapse tutorials. All profiles stored in the selected device’s on-board memory are erased when you reset a Razer device.
Safety, Care and Battery
Safety Guidelines
- If you cannot operate the device properly and troubleshooting does not work, unplug it and contact the Razer hotline or go to support.razer.com.
- Do not take the device apart or operate it under abnormal current loads. Doing so voids your warranty.
- The mouse needs a USB connection that supplies enough power to charge it. Charging may be affected on a non-powered USB hub or non-powered USB, mostly found on keyboards and peripherals.
- Keep the device away from liquid, humidity or moisture.
- Operate it only between 0°C (32°F) and 40°C (104°F). If the temperature goes outside this range, unplug and/or switch off the device so the temperature can return to an optimal level.
Comfort
- Position your keyboard and monitor directly in front of you with the mouse next to the keyboard. Keep your elbows at your sides, not too far away, and the keyboard within easy reach.
- Adjust your chair and table so the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, posture straight and shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. If you repeat the same tasks, avoid bending, extending or twisting your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest.
- Do not sit in one position all day. Get up, step away from your desk and stretch your arms, shoulders, neck and legs.
If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back, consult a qualified medical doctor immediately.
Cleaning and Maintenance
Once a month, unplug the device from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Some surfaces cause undue wear on the feet, which then need constant care and eventual replacement. A premium Razer mouse mat is recommended, and the sensor is tuned to track best on Razer mouse mats.
Battery Warning
The mouse contains a Li-ion rechargeable battery, and its life expectancy depends on usage. If you suspect the battery is drained, try charging it. Caution: do not open, mutilate, or expose the mouse to conducting materials (metal), moisture, liquid, fire or heat. Doing so may cause batteries to leak or explode, resulting in personal injury.
Warranty and Support
The product carries a 2 year warranty, and you can register it at razerid.razer.com/warranty. The latest Limited Product Warranty terms are at razer.com/warranty. The serial number is on the underside of the mouse, next to the slider switch and profile button. For support, go to support.razer.com.
Frequently Asked Questions
How long does the Razer Naga V2 Pro take to charge?
A fully depleted battery takes approximately 4 hours to charge. Plug the charging cable from your PC’s USB port into the mouse, and fully charge it before first use. The USB connection has to supply enough power to charge the mouse. Charging may be affected on a non-powered USB hub or non-powered USB, such as those found on some keyboards and peripherals.
How do I pair the Razer Naga V2 Pro over Bluetooth?
Push the slider switch to Bluetooth mode, then press and hold the scroll wheel, scroll mode and DPI cycle buttons together for three seconds. The Razer logo blinks twice at repeated intervals to show pairing mode is active. Turn on Bluetooth on your device, choose “Razer Naga V2 Pro” from the list, and wait for pairing. The logo briefly turns static blue once the mouse is paired.
How do I connect the mouse with the HyperSpeed wireless dongle?
Plug the dongle into your PC, then push the slider switch to Razer HyperSpeed Wireless (2.4 GHz) mode. The mouse is then ready for wireless use. The dongle can also support a keyboard and mouse at once, so you can pair one additional HyperSpeed-compatible device through HyperSpeed Multi-Device Pairing in Razer Synapse while the mouse is in HyperSpeed mode. Each peripheral can connect to only one dongle at a time.
What do the slider switch positions do?
The slider switch under the mouse has three positions: Bluetooth mode, Power off mode and Razer HyperSpeed Wireless (2.4 GHz) mode. Use Bluetooth for pairing directly with a device, 2.4 GHz with the included dongle, and the power-off position when you are not using the mouse wirelessly.
What does the red blinking scroll wheel mean?
It is the low power indicator. The scroll wheel blinks red twice at repeated intervals when battery power is below 5%. The blinking continues until the battery is drained or you connect the mouse to a PC with the charging cable.
How do I change the side plate on the Razer Naga V2 Pro?
Unplug the mouse first, then pull from the bottom of the side plate to remove it and fit the one you want. The box includes a 12-button plate (recommended for MMOs), a 6-button plate (recommended for battle royales) and a 2-button plate (recommended for general use). Use only side plates designed for the Razer Naga V2 Pro, not ones made for other Razer products.
What are the default DPI stages, and how can I change them?
The defaults are 400, 800, 1600 (the default stage), 3200 and 6400, and you cycle through them with the DPI cycle button. In Razer Synapse, open the Mouse tab and the Performance subtab to customize the stages. You can create up to 5, and Enable X-Y Sensitivity lets you use different horizontal and vertical values.
How do I switch profiles, and what do the indicator colors mean?
Press the profile button on the underside to cycle through the stored profiles. The profile indicator color shows the selection: Active Profile is white, Profile 1 red, Profile 2 green, Profile 3 blue and Profile 4 cyan. The mouse stores up to 5 profiles from Synapse, and you can use them on systems that do not have the app installed. To assign a profile to a memory slot, click the On-board Profiles button in Synapse and drag the profile to the slot you want.
How do I change the scroll mode?
Press the scroll mode button to cycle through Standard (default), Distinct, Ultra-fine, Adaptive, Smooth Scroll and Custom. Custom appears only after you enable it in Razer Synapse, where you can also choose which stages are available and reorder them. Distinct gives firmer scrolls for precise weapon switching, and Ultra-fine gives softer scrolls with multiple steps for spammable inputs.
Do I need Razer Synapse to use the Razer Naga V2 Pro?
Synapse is the software for customizing the mouse: button assignments, sensitivity, scroll stages, lighting, calibration, power settings and profiles. It requires Windows 10 64-bit (or higher) and an internet connection for installation, and a Razer ID account is recommended but optional. Profiles stored on the mouse can be used on systems without the app installed. Download the installer from razer.com/synapse if it does not prompt you to install it.
How do I reset the Razer Naga V2 Pro?
For a manual reset, press and hold the left, right and scroll wheel mouse buttons together for 7 seconds. Synapse also has a Reset tab under Settings that performs a factory reset on connected Razer devices with on-board memory. A factory reset erases all profiles stored in that device’s on-board memory.
How should I clean and care for the mouse?
Once a month, unplug the mouse and wipe it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Keep the mouse away from liquid, humidity and moisture, and operate it only between 0°C (32°F) and 40°C (104°F). A premium Razer mouse mat is recommended because the sensor is tuned for Razer mouse mats and some surfaces wear the mouse feet. Do not take the mouse apart.
