Lenovo IdeaPad 1 15ALC7
The Lenovo IdeaPad 1 15ALC7 is a 15-inch Windows laptop in the IdeaPad 1 Series. It has a 381.0 mm (15 inch) screen, a keyboard with hotkeys and function keys, a touchpad, a camera with a sliding privacy cover, and a 42 Wh battery. On the left side it offers a power connector, one USB (3.2 Gen 1) Type-A port, an HDMI 1.4 port, a USB-C port and a combo audio jack. On the right side it has an SD card slot, a USB 2.0 port and a Novo button hole for reaching startup options. Selected models add a fingerprint reader in the power button and a touch-enabled screen. This page covers the controls, key specifications, everyday settings, power and battery behavior, UEFI/BIOS setup and passwords, and the support options in the Lenovo guide for the IdeaPad 1 Series.
Covered Models and Machine Types
The Lenovo guide covers 14-inch and 15-inch IdeaPad 1 Series models. Illustrations may look slightly different from your computer, and some accessories, features and software are not available on every model. The 15ALC7 family uses machine type 82R4.
| Model family | Machine type (MT) |
| IdeaPad 1 14ADA7 (including Ua) | 82R0 |
| IdeaPad 1 14ALC7 (including 1 and 2), IdeaPad 14 ALC7 | 82R3 |
| IdeaPad 1 14AMN7 (including Ua, Ub, Uc) | 82VF |
| IdeaPad 1 14IAU7 (including 1 and 2), IdeaPad 14 IAU7 | 82QC |
| IdeaPad 1 14IGL7 (including 1 and 2) | 82V6 |
| IdeaPad 1 14IJL7 (including Ua) | 82LV |
| IdeaPad 1 15ADA7 (including Ua) | 82R1 |
| IdeaPad 1 15ALC7 (including 1 and 2), IdeaPad 15 ALC7 | 82R4 |
| IdeaPad 1 15AMN7 (including Ua, Ub, Uc) | 82VG, 82X5 |
| IdeaPad 1 15IAU7 (including 1 and 2), IdeaPad 15 IAU7 | 82QD |
| IdeaPad 1 15IGL7 (including 1 and 2) | 82V7 |
| IdeaPad 1 15IJL7 (including Ua) | 82LX |
| IdeaPad 1 15IRU7 (including 1 and 2) | 83B4 |
The instructions are based on the Windows operating system and do not apply if you install and use a different operating system. Windows features change through Windows Update, so Windows-related steps may become outdated. The product name and serial number are usually printed or etched on the bottom of the computer.
Computer Parts and Controls
Front
| Part | What it does |
| Wireless antennas | Send and receive radio waves for the built-in wireless LAN and Bluetooth module. They are not visible from outside the computer. |
| Microphones | Capture or record sound and voice. |
| Camera | Captures still and moving images for photos, video recording and video chatting. |
| Camera cover slider | Move the slider to cover or uncover the camera lens to help protect your privacy. |
| Camera light | When the light is on, the camera is in use. |
| Screen | Displays text, graphics and videos. Selected models support multi-touch. |
If the antenna location is close to your body (less than 20 cm), the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with the computer.
Base
| Part | What it does |
| Power light | On: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode. |
| Power button / fingerprint reader (selected models) | Press to turn on the computer or put it into sleep mode. On models with the reader, you can enroll and read your fingerprint for user authentication. |
| Keyboard | Enter characters and interact with programs. It also includes hotkeys and function keys for changing settings and performing tasks quickly. |
| Touchpad | Performs finger touch and all functions of a traditional mouse, and supports multi-touch. |
Left side
| Part | What it does |
| Power connector | Connects to power with the included power cord and ac power adapter. |
| Charging light | Solid white: connected to ac power, battery capacity 91%–100%. Solid amber: connected to ac power, battery capacity 1%–90%. Off: not connected to ac power. |
| USB (3.2 Gen 1) Type-A connector | Connects USB-compatible devices such as a keyboard, mouse, storage device or printer. |
| HDMI 1.4 connector | Connects to a compatible digital audio device or video monitor, such as an HDTV. |
| USB-C connector | Connects external storage or data devices. An appropriate adapter may be needed. This connector cannot be used to connect external display devices. |
| Combo audio jack | Connects headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. It does not support standalone external microphones. If you use a headset, choose one with a single plug. |
Right side
| Part | What it does |
| Power light | Same behavior as the power light on the base. |
| Novo button hole | Press the Novo button to open the Novo Button menu, where you can open the UEFI/BIOS setup utility, the Boot menu or the Windows startup options screen. |
| SD card slot | Accepts an SD card or a MultiMediaCard (MMC) for data transfer or storage. |
| USB 2.0 connector | Connects USB-compatible devices such as a mouse, storage device or printer. |
Key Specifications
These values apply to the 15-inch ALC models, which include the IdeaPad 1 15ALC7, IdeaPad 1 15ALC7 1, IdeaPad 1 15ALC7 2 and IdeaPad 15 ALC7. Other models in the guide differ in several rows, so check your own configuration.
| Item | Specification |
| Dimensions (15-inch models) | Width 360.2 mm (14.2 inches), depth 236 mm (9.3 inches), thickness 17.9 mm (0.7 inches) |
| ac power adapter | Input 100 V ac–240 V ac, 50 Hz–60 Hz. Output 20 V dc, 3.25 A. Power 65 W |
| Battery pack | 42 Wh, 3 cells |
| Memory | DDR4, 1 physical slot |
| Storage | Solid-state drive, M.2 form factors 2242 and 2280 (both marked with an asterisk in the guide), PCI Express bus |
| Screen | 381.0 mm (15 inches). Resolution options: 1366 × 768 (HD), 1920 × 1080 (FHD), 1920 × 1080 (FHD IPS), 1920 × 1080 (FHD IPS OnCell Touch) |
| Keyboard | Function keys, hotkeys, numeric keypad (selected models) |
| USB-C | Power output up to 5 V and 3 A. Data transfer rate up to 5 Gbps (USB 3.2 Gen 1) |
| HDMI 1.4 | Maximum output resolution 3840 × 2160 at 30 Hz frame rate and 24 bpp color depth |
| Other connectors and slots | Audio connector, USB 2.0, USB (3.2 Gen 1) Type-A, memory card slot |
| Security | Fingerprint reader (selected models) |
| Network | Bluetooth, wireless LAN adapter |
| Microprocessor | Type system information in the Windows search box and press Enter to view it |
USB transfer rates
Actual USB transfer rates depend on the host and peripheral devices, file attributes and system configuration, and will be slower than the listed data rates: USB 2.0 is listed at 0.48 Gbit/s and USB 3.2 Gen 1 at 5 Gbit/s.
Operating Environment and Heat Caution
Operating environment
- Maximum altitude without pressurization: 3048 m (10 000 ft).
- At altitudes up to 2438 m (8000 ft): operating temperature 5°C to 35°C (41°F to 95°F); storage temperature 5°C to 43°C (41°F to 109°F).
- At altitudes above 2438 m (8000 ft): maximum operating temperature in unpressurized conditions is 31.3°C (88°F).
- When you charge the battery, its temperature must be no lower than 10°C (50°F).
- Relative humidity: operating 8% to 95% at wet-bulb temperature 23°C (73°F); storage 5% to 95% at wet-bulb temperature 27°C (81°F).
Avoid constant contact with hot sections
CAUTION: When the computer is operating, place it on a hard, flat surface with the bottom not touching bare skin. Under normal conditions the bottom surface stays within the range defined in IEC 62368-1, but it can still be hot enough to cause discomfort or harm if touched directly for over one minute at a time. Avoid prolonged direct contact with the bottom of the computer.
Everyday Windows Settings and Lenovo Apps
Basic Windows settings
To change a setting, type its keyword in the Windows search box, select the best match and follow the on-screen instructions.
- Control Panel (search: Control Panel): view or change Windows settings, including hardware and software setup.
- Wi-Fi (search: Wi-Fi): click the network icon in the Windows notification area, then select a network. The wireless LAN module may support different standards, and in some countries or regions 802.11ax may be disabled by local regulations.
- Airplane mode (search: Airplane mode): turns all wireless communications on and off.
- Night light (search: Night light): shows warmer colors and reduces emitted blue light. You can adjust the color temperature while it is on. Selected Lenovo computers are low blue light certified and tested with night light on and color temperature at the default value of 48.
- Windows Update (search: Windows Updates): updates download automatically when the computer is online, and you are prompted to restart to install them. You can also check manually. Use only Windows Update to download and install updates, because updates from other sources may include security risks.
- Fingerprint (selected models, search: Sign-in options): enroll your fingerprint for Windows sign-in.
- Touch keyboard (search: Touch keyboard): in stand, tent or tablet mode on models that support them, the physical keyboard is disabled and the Windows touch keyboard appears when text input is needed. If it does not, select the touch keyboard icon in the Windows notification area.
Lenovo Vantage and Lenovo PC Manager
One of these two Lenovo apps may be pre-installed, depending on where the computer was purchased. To open it, type its name in the Windows search box and select the result. Either app lets you view product information and system status, manage device settings, and check for and perform system updates. Only Lenovo Vantage offers the product information and settings features, while Lenovo PC Manager lets you check for and perform driver updates. Lenovo Vantage is a free download from the Microsoft Store. Features may vary by product and change with updates.
Windows help
If on-screen instructions do not solve a problem, type Get Help or Tips in the Windows search box and press Enter, then describe the problem. You can also visit https://support.microsoft.com.
Novo Button Menu
The Novo Button menu appears before the operating system starts. From it you can open the BIOS/UEFI setup utility, open the boot device selection menu, or open the Windows startup options screen. From the startup options screen you can then start from a recovery drive, reset the computer, or open the advanced options screen.
Open the Novo Button menu
- Turn off the computer.
- Open the LCD screen and press the Novo button.
Alternatively, turn off the computer and press Fn and the power button together.
Keyboard, Hotkeys, Numeric Keypad and Touch Gestures
Keyboard hotkeys
Some keys are printed with icons. These hotkeys work alone or with the Fn key. The guide lists these functions:
- Mute or unmute sound.
- Decrease or increase system volume.
- Mute or unmute the microphone.
- Reload web pages or refresh the screen.
- Enable or disable the touchpad.
- Turn airplane mode on and off.
- Open the Windows Settings app.
- Open the Windows Calculator app.
- Open the Windows snipping tool.
- Display thumbnails of all open apps.
- Open a voice assistant app (must be used with Fn; not available in all countries or regions, and your model may not include this hotkey or it may not work).
- Open Lenovo Vantage, Lenovo PC Manager or an app launch bar.
- Enable or disable the integrated camera.
- Lock the screen.
- Switch display devices.
- Decrease or increase screen brightness.
- Play or pause media.
- Stop media playback.
- Go to the next media file in the playlist or folder.
- Go to the previous media file in the playlist or folder.
- Turn the keyboard backlight on or off, or adjust its brightness (must be used with Fn).
Hotkey mode
Some hotkeys share keys with the function keys F1 to F12. Hotkey mode is a UEFI/BIOS setting that decides which behavior you get without holding Fn.
| Hotkey mode setting | Using hotkeys | Using function keys |
| Disabled | Hold Fn and press the hotkey | Press the function keys directly |
| Enabled | Press the hotkeys directly | Hold Fn and press the function key |
Hotkeys that do not share keys with function keys are not affected by this setting and must always be used with Fn.
Numeric keypad
On computers with a dedicated numeric keypad at the far right of the keyboard, press the NumLock key to enable or disable it.
Multi-touch gestures
These apply to models with a touch-enabled screen, and not all apps support every gesture.
| Gesture | Function |
| Tap | Select an item |
| Tap twice quickly | Double-click an item |
| Tap and hold | Right-click an item |
| Pinch | Zoom out |
| Spread | Zoom in |
| Tap from the left edge | View all open apps |
| Tap and hold (as labeled in the guide; the illustration shows a finger moving in from the right edge) | Display the Windows Action Center |
Power and Battery
Check the battery status
The battery status icon sits in the Windows notification area. Click it to see the remaining percentage, view the current power plan, change the power mode and open battery settings. A warning message appears when the battery is low.
Charge the battery
Connect the computer to ac power when the battery is low. A full charge takes about two to four hours, depending on battery capacity, the environment and whether you are using the computer. The recommended temperature range for charging is 10°C (50°F) to 35°C (95°F). You can check battery temperature in Lenovo Vantage or Lenovo PC Manager.
- To maximize battery life, once the battery is fully charged it must discharge to 94% or lower before it is allowed to recharge.
- To extend battery lifespan, the battery may optimize its full charge capacity based on your usage. After long periods of limited use, full capacity may not be available until you discharge to as low as 20% and recharge completely. See the power section of Lenovo Vantage for more information.
Set power button behavior
By default, pressing the power button puts the computer to sleep. To change this:
- Type Control Panel in the Windows search box and press Enter. View by large or small icons.
- Select Power Options, then click Choose what the power button does.
Power plan
A power plan is a collection of power-saving settings that sets idle time-outs for hardware components. The default plan on computers with pre-installed Windows is Balanced. The listed time-outs apply when plugged in, and a different set applies on battery power. For the IdeaPad 1 15ALC7 family (IdeaPad 1 15ALC7, 15ALC7 1, 15ALC7 2 and IdeaPad 15 ALC7):
- Turn off the display after 10 minutes, on battery power or plugged in.
- Put the computer to sleep after 30 minutes, on battery power or plugged in.
To wake the computer from sleep, press the power button or any key. To customize a plan on computers with pre-installed Windows, type power plan in the Windows search box, press Enter and adjust the plan to your preference.
Set performance mode
The computer can work in different performance modes, and performance and power consumption vary between them. Press Fn + Q to cycle through the modes.
UEFI/BIOS Setup Utility
UEFI/BIOS is the first program that runs at startup. It initializes hardware components and loads the operating system and other programs. Your computer may include a setup utility for changing certain UEFI/BIOS settings.
Open the setup utility
- Turn on or restart the computer.
- When the Lenovo logo appears, press F2 repeatedly. With hotkey mode enabled, press Fn + F2.
Change the startup sequence
- Open the UEFI/BIOS setup utility.
- Go to the Boot menu.
- Follow the on-screen instructions to change the order of devices under Boot Priority Order.
To change the startup sequence temporarily without opening the utility, start the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.
Change hotkey mode
- Open the UEFI/BIOS setup utility.
- Select Configuration, then Hotkey Mode, and press Enter.
- Set it to Disabled or Enabled.
- Select Exit, then Exit Saving Changes.
UEFI/BIOS Passwords
All passwords set in the setup utility use letters and numbers only.
| Password type | Prerequisite | Usage |
| Administrator password | None | Required to start the setup utility |
| User password | Administrator password must be set | Can be used to start the setup utility |
| Master hard disk password | None | Required to start the operating system |
| User hard disk password | Master hard disk password must be set | Can be used to start the operating system |
If you start the setup utility with the user password, you can change only a few settings.
Set an administrator password
ATTENTION: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to a Lenovo authorized service provider to have the system board replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security, then Set Administrator Password, and press Enter.
- Enter a password of letters and numbers only and press Enter.
- Enter it again and press Enter.
- Select Exit, then Exit Saving Changes.
From then on you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator or user password to start the computer.
Change or remove the administrator password
Only the administrator can do this.
- Open the setup utility using the administrator password.
- Select Security, then Set Administrator Password, and press Enter.
- Enter the current password.
- In Enter New Password, type the new password.
- In Confirm New Password, type it again. To remove the password, press Enter in both boxes without typing anything.
- Select Exit, then Exit Saving Changes.
Removing the administrator password also removes the user password.
Set a user password
The administrator password must be set first.
- Open the setup utility using the administrator password.
- Select Security, then Set User Password, and press Enter.
- Enter a password of letters and numbers only, different from the administrator password, and press Enter.
- Enter it again and press Enter.
- Select Exit, then Exit Saving Changes.
Enable the power-on password
The administrator password must be set first.
- Open the UEFI/BIOS setup utility.
- Select Security, then Power on Password, and press Enter.
- Change the setting to Enabled.
- Select Exit, then Exit Saving Changes.
A prompt then appears every time you turn on the computer, and you must enter the administrator or user password to start it.
Set a hard disk password
ATTENTION: Be extremely careful. If you forget the hard disk password, Lenovo authorized service personnel cannot reset it or recover data from the hard disk. You must take the computer to a Lenovo authorized service provider to have the hard disk drive replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security, then Set Hard Disk Password, and press Enter. You cannot set it if you started the utility with the user password.
- Follow the on-screen instructions to set both the master and user passwords. They must be set at the same time.
- Select Exit, then Exit Saving Changes.
Once set, you must provide the correct password to start the operating system.
Change or remove a hard disk password
- Open the UEFI/BIOS setup utility.
- Select Security.
- To change or remove the master password, select Change Master Password and press Enter. Removing the master password also removes the user hard disk password. To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
- Select Exit, then Exit Saving Changes.
Help, Recovery and Support
Troubleshooting and self-help
Lenovo points owners to https://www.lenovo.com/tips and https://forums.lenovo.com for troubleshooting, and to https://www.lenovo.com/accessibility for accessibility information. Latest drivers and UEFI/BIOS are available through Lenovo Vantage, Lenovo PC Manager or https://support.lenovo.com. To partition your storage drive, see https://support.lenovo.com/solutions/ht503851.
Reset or restore Windows
For Lenovo recovery options, go to https://support.lenovo.com/HowToCreateLenovoRecovery and follow the on-screen instructions. For Windows recovery options, go to https://pcsupport.lenovo.com, detect your computer or select its model manually, click Diagnostics, then Operating System Diagnostics, and follow the instructions.
Customer replaceable units (CRUs)
For this product model, the power cord and the ac power adapter are self-service CRUs. Replacing any other part, including the built-in rechargeable battery, must be done by a Lenovo-authorized repair facility or technician. See https://support.lenovo.com/partnerlocation. If Lenovo ships you a CRU, you might have to return the defective part, and you might be charged for the replacement if Lenovo does not receive the defective part within thirty (30) days of your receipt of the replacement.
Before you contact Lenovo
Record your product name, machine type and serial number, plus the problem details: whether it is continuous or intermittent, any error message or code, the operating system and version, the software running at the time, and whether the problem can be reproduced and how.
Lenovo Customer Support and warranty services
During the warranty period you can call the Lenovo Customer Support Center. Phone numbers by country or region are at https://pcsupport.lenovo.com/supportphonelist. Warranty-period services include problem determination, Lenovo hardware repair and engineering change management. Services not covered include use of parts not made for or by Lenovo or non-warranted parts, identification of software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, device driver changes or upgrades, installation and maintenance of network operating systems, and installation and maintenance of programs. Extra services can be purchased at https://pcsupport.lenovo.com/warrantyupgrade, and availability varies by country or region. Warranty terms are in the Safety and Warranty Guide that comes with the computer.
Frequently Asked Questions
How do I open the Novo Button menu on the IdeaPad 1 15ALC7?
Turn the computer off completely, open the screen, and press the Novo button, which sits in a small hole on the right side. If you would rather not use the pinhole, turn the computer off and press Fn and the power button together. The menu appears before Windows starts and lets you open the UEFI/BIOS setup utility, the boot device selection menu or the Windows startup options screen.
How do I get into the BIOS setup utility?
Turn the computer on or restart it, and press F2 repeatedly as soon as the Lenovo logo appears. If hotkey mode is enabled on your computer, press Fn + F2 instead. You can also reach the setup utility through the Novo Button menu.
How can I start the computer from a USB drive or another device just once?
Start the computer and press F12 (or Fn + F12 if hotkey mode is enabled) repeatedly when the Lenovo logo appears. This changes the startup sequence temporarily without opening the setup utility. To make a lasting change, open the setup utility, go to the Boot menu and reorder the devices under Boot Priority Order, then choose Exit and Exit Saving Changes.
What do the charging light colors mean?
The charging light is on the left side next to the power connector. Solid white means the computer is connected to ac power and the battery is between 91% and 100%. Solid amber means it is connected to ac power and the battery is between 1% and 90%. If the light is off, the computer is not connected to ac power.
How long does the battery take to charge, and why does it not recharge right away?
A full charge takes about two to four hours, depending on the environment and how much you are using the computer. Charge the battery between 10°C (50°F) and 35°C (95°F), since temperature affects charging. To protect battery life, a fully charged battery has to discharge to 94% or lower before it can recharge, so a plugged-in computer that stays near full is behaving as designed.
Can I connect an external monitor to the USB-C port?
No. The USB-C connector on this computer is for external storage or data devices and cannot be used to connect external display devices. Use the HDMI 1.4 connector for a monitor or HDTV instead. It supports a maximum output resolution of 3840 × 2160 at a 30 Hz frame rate and 24 bpp color depth.
Why does my external microphone not work in the headphone jack?
The combo audio jack does not support standalone external microphones. It accepts headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug, so use a headset with a single plug that combines the microphone and the headphones.
How do I change the performance mode?
Press Fn + Q to cycle through the available performance modes. Performance and power consumption differ in each mode, so the setting you choose affects how the computer balances speed and power use.
How do I use the F1–F12 keys without holding Fn?
Change the hotkey mode in the UEFI/BIOS setup utility. Open the utility, select Configuration, then Hotkey Mode, and press Enter. Set it to Disabled so the function keys work directly and hotkeys need Fn, or Enabled so the hotkeys work directly and the function keys need Fn. Finish by selecting Exit and Exit Saving Changes. Hotkeys that do not share a key with a function key always need Fn.
What should I do if my computer stops responding?
Press and hold the power button until the computer turns off, then restart it.
What should I do if I spill liquid on the computer?
Carefully unplug the ac power adapter and turn the computer off immediately. The faster you stop current passing through the computer, the more likely you are to reduce damage from short circuits. You might lose some unsaved work, but leaving it on might make the computer unusable. Then wait until you are certain all the liquid is dry before turning it on. Do not turn the computer over to drain the liquid. If your computer has keyboard drainage holes on the bottom, the liquid drains through them.
What happens if I forget my administrator or hard disk password?
Lenovo authorized service personnel cannot reset either password. For a forgotten administrator password, you must take the computer to a Lenovo authorized service provider to have the system board replaced. For a forgotten hard disk password, the hard disk drive must be replaced and the data cannot be recovered. Both services require proof of purchase and a fee is charged for parts and service, so store these passwords carefully.
