Lenovo IdeaPad 1 15AMN7
The Lenovo IdeaPad 1 15AMN7 is a 15-inch Windows laptop in the IdeaPad 1 series. It has a built-in camera with a privacy cover slider, a Left-side set of ports (power connector, USB 3.2 Gen 1 Type-A, HDMI 1.4, USB-C and a combo audio jack), and a Right-side set (SD card slot, USB 2.0 and a Novo button hole). Day-to-day, owners use hotkeys and the Fn key for volume, brightness, camera and wireless controls, press Fn + Q to cycle through performance modes, and use the Novo button menu or the F2 and F12 startup keys to reach UEFI/BIOS setup and boot options. The UEFI/BIOS utility also lets you set administrator, user, power-on and hard disk passwords. Some features, such as the fingerprint reader, numeric keypad and touch screen, are available only on selected models, so check your own computer before relying on them.
Covered Models and Machine Types
The same guide covers the whole IdeaPad 1 series. Illustrations may look slightly different from your computer, and some accessories, features and software are not available on all models. The 15AMN7 family is machine types 82VG and 82X5.
| Model family | Variants listed | Machine type (MT) |
| IdeaPad 1 14ADA7 | 14ADA7, 14ADA7 Ua | 82R0 |
| IdeaPad 1 14ALC7 | 14ALC7, 14ALC7 1, 14ALC7 2, IdeaPad 14 ALC7 | 82R3 |
| IdeaPad 1 14AMN7 | 14AMN7, 14AMN7 Ua, 14AMN7 Ub, 14AMN7 Uc | 82VF |
| IdeaPad 1 14IAU7 | 14IAU7, 14IAU7 1, 14IAU7 2, IdeaPad 14 IAU7 | 82QC |
| IdeaPad 1 14IGL7 | 14IGL7, 14IGL7 1, 14IGL7 2 | 82V6 |
| IdeaPad 1 14IJL7 | 14IJL7, 14IJL7 Ua | 82LV |
| IdeaPad 1 15ADA7 | 15ADA7, 15ADA7 Ua | 82R1 |
| IdeaPad 1 15ALC7 | 15ALC7, 15ALC7 1, 15ALC7 2, IdeaPad 15 ALC7 | 82R4 |
| IdeaPad 1 15AMN7 | 15AMN7, 15AMN7 Ua, 15AMN7 Ub, 15AMN7 Uc | 82VG, 82X5 |
| IdeaPad 1 15IAU7 | 15IAU7, 15IAU7 1, 15IAU7 2, IdeaPad 15 IAU7 | 82QD |
| IdeaPad 1 15IGL7 | 15IGL7, 15IGL7 1, 15IGL7 2 | 82V7 |
| IdeaPad 1 15IJL7 | 15IJL7, 15IJL7 Ua | 82LX |
| IdeaPad 1 15IRU7 | 15IRU7, 15IRU7 1, 15IRU7 2 | 83B4 |
To confirm which model you own, look for the product name and serial number, which can usually be found on the bottom of the computer, printed on a label or etched on the cover.
Parts and Controls
Front
| Part | What it does |
| Wireless antennas | Send and receive radio waves for the built-in wireless LAN (local area network) and Bluetooth module. They are not visible from the outside of the computer. If an antenna location is close to the user’s body (less than 20 cm), the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with the computer. |
| Microphones | Capture or record sound and voice. |
| Camera | Captures still and moving images for photos, video recording and video chatting. |
| Camera cover slider | Move the slider to cover or uncover the camera lens. The cover helps protect your privacy. |
| Camera light | If the light is on, the camera is in use. |
| Screen | Displays text, graphics and videos. Selected models support multi-touch. |
Base (15-Inch Models)
| Part | What it does |
| Power light | On: the computer is turned on. Off: the computer is turned off or in hibernation mode. Blinking: the computer is in sleep mode. |
| Power button / fingerprint reader (selected models) | Press the button to turn on the computer or put it into sleep mode. On models with a fingerprint reader, it also enrolls and reads your fingerprint for user authentication. |
| Keyboard | Enters characters and interacts with programs. It also includes hotkeys and function keys for changing settings and performing tasks quickly. |
| Touchpad | Performs finger touch and all the functions of a traditional mouse. It also supports multi-touch. |
Left Side
| Part | What it does |
| Power connector | Connect to power with the included power cord and ac power adapter. |
| Charging light | Solid white: connected to ac power, battery capacity 91%–100%. Solid amber: connected to ac power, battery capacity 1%–90%. Off: not connected to ac power. |
| USB (3.2 Gen 1) Type-A connector | Connect a USB-compatible device, such as a USB keyboard, mouse, storage device or printer. |
| HDMI 1.4 connector | Connect to a compatible digital audio device or video monitor, such as an HDTV. |
| USB-C connector | Connect external storage or data devices. An appropriate adapter may be needed for connecting external devices. This connector cannot be used to connect external display devices. |
| Combo audio jack | Connect headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. This jack does not support standalone external microphones. If you use a headset, choose one with a single plug. |
Right Side
| Part | What it does |
| Power light | Same states as the power light on the base: on, off or hibernation, and blinking for sleep mode. |
| Novo button hole | Press the Novo button to open the Novo Button menu, where you can choose the UEFI/BIOS setup utility, the Boot menu or the Windows startup options screen. |
| SD card slot | Insert an SD card or a MultiMediaCard (MMC) for data transfer or storage. |
| USB 2.0 connector | Connect USB-compatible devices, such as a USB mouse, storage device or printer. |
Specifications for 15-Inch AMN7 Models
The guide lists specifications by model group. The values below are the ones that apply to the 15-inch models and to AMN models, which include the IdeaPad 1 15AMN7. Items marked with an asterisk in the guide are for selected models.
Hardware
| Item | Specification |
| Dimensions (15-inch models) | Width 360.2 mm (14.2 inches); depth 236 mm (9.3 inches); thickness 17.9 mm (0.7 inches) |
| ac power adapter input | 100 V ac–240 V ac, 50 Hz–60 Hz |
| ac power adapter output | 20 V dc, 3.25 A; 65 W (listed for ADA, ALC, AMN, IAU and IRU models) |
| Battery pack | 42 Wh, 3 cells. Capacity is the typical or average capacity measured in a specific test environment; other environments may differ but are no lower than the rated capacity (see product label). |
| Microprocessor | To view it, type system information in the Windows search box and press Enter. |
| Memory | LPDDR5 for AMN models; 1 physical slot |
| Secondary storage | Solid-state drive; form factor M.2 (2242*, 2280*); bus PCI Express. (eMMC applies only to ADA, IGL and IJL models.) |
| Screen size | 381.0 mm (15 inches) |
| Display resolution options (15-inch models) | 1366 × 768 pixels (HD model); 1920 × 1080 pixels (FHD model); 1920 × 1080 pixels (FHD IPS model); for ALC, AMN, IAU and IRU models, 1920 × 1080 pixels (FHD IPS OnCell Touch model) |
| Keyboard | Function keys, hotkeys, numeric keypad* |
| Security | Fingerprint reader* |
| Network | Bluetooth, wireless LAN adapter |
Connectors and Slots
| Connector | Specification |
| Audio connector | Combo audio jack |
| USB 2.0 connector | Data rate 0.48 Gbit/s (maximum listed) |
| USB (3.2 Gen 1) Type-A connector | Data rate 5 Gbit/s (maximum listed) |
| USB-C connector | Power output up to 5 V and 3 A; USB data transfer rate up to 5 Gbps for USB 3.2 Gen 1 |
| HDMI 1.4 connector | Maximum output resolution 3840 × 2160 at 30 Hz frame rate and color depth of 24 bpp (bits per pixel) |
| Memory card slot | SD card or MultiMediaCard (MMC) |
Actual USB transfer rates depend on the processing capability of the host and peripheral devices, file attributes and other system and environment factors, and will be slower than the listed data rates.
Operating Environment
- Maximum altitude (without pressurization): 3048 m (10 000 ft).
- At altitudes up to 2438 m (8000 ft): operating temperature 5°C to 35°C (41°F to 95°F); storage temperature 5°C to 43°C (41°F to 109°F).
- At altitudes above 2438 m (8000 ft): maximum operating temperature under the unpressurized condition is 31.3°C (88°F).
- When you charge the battery, its temperature must be no lower than 10°C (50°F).
- Relative humidity: operating 8% to 95% at wet-bulb temperature 23°C (73°F); storage 5% to 95% at wet-bulb temperature 27°C (81°F).
Caution: Hot Bottom Surface
When the computer is operating, place it on a hard, flat surface so the bottom is not in contact with bare skin. Under normal operating conditions the bottom surface stays within an acceptable range defined in IEC 62368-1, but it can still be hot enough to cause discomfort or harm if directly touched for over one minute at a time. Avoid prolonged direct contact with the bottom of the computer.
Getting Started with Windows
The guide’s instructions are based on Windows. To change a setting, type the keywords in the Windows search box and select the best match, then follow the on-screen instructions. Microsoft changes Windows through Windows Update, so some steps may be out of date; refer to Microsoft resources for the latest information.
Common Windows Settings
| Function | What it does | Search keywords |
| Control Panel | View or change Windows settings, including hardware and software setup and configuration. | Control Panel |
| Connect to Wi-Fi | On models with a wireless LAN module, click the network icon in the Windows notification area and select a network. The module may support different standards; in some countries or regions, 802.11ax may be disabled by local regulations. | Wi-Fi |
| Airplane mode | Turns all wireless communications on and off, for example when boarding an airplane. | Airplane mode |
| Night light | Shows warmer colors and reduces emitted blue light, which reduces the chance of eye fatigue or strain. | Night light |
| Adjust color temperature | With night light on, you can adjust the color temperature. Selected low blue light certified computers are tested with night light on and color temperature at the default value of 48. | Night light |
| Windows Updates | Applicable updates download automatically when connected to the Internet, and you are prompted to restart to install them. You can also check manually. Use only Windows Update to download and install updates; updates from other sources may include security risks. | Windows Updates |
| Enroll your fingerprint | On models with a fingerprint reader, enroll a fingerprint for Windows sign-in. | Sign-in options |
Lenovo Vantage and Lenovo PC Manager
These Lenovo apps let you view product information and system status, manage and change device settings, and check for and perform system updates. Updating drivers is available in both; some other features are available only in Lenovo Vantage. Depending on the country or region where the computer was purchased, one of the apps may be pre-installed. To open it, type its name in the Windows search box and select the match. If neither is installed, you can install one yourself; Lenovo Vantage is a free download from the Microsoft Store. Features may vary with updates and are not available on all Lenovo products.
Windows Help
If the on-screen instructions do not solve a problem, type Get Help or Tips in the Windows search box and press Enter, then describe the problem and select the matching result. You can also visit the Microsoft support website at https://support.microsoft.com.
Novo Button Menu
The Novo Button menu appears before the operating system starts. From it you can open the UEFI/BIOS setup utility, open the boot device selection menu, or open the Windows startup options screen. From the Windows startup options screen you can start the computer using a recovery drive, reset the computer, or open the advanced options screen.
Open the Novo Button Menu
- Turn off the computer.
- Open the LCD screen and press the Novo button (the pinhole on the right side).
Alternatively, turn off the computer and press Fn and the power button to open the Novo Button menu.
Keyboard Hotkeys, Hotkey Mode and Numeric Keypad
Keyboard Hotkeys
Some keys are printed with icons. These hotkeys can be pressed alone or together with the Fn key to open certain apps or change certain settings quickly. The icon printed on each key shows its function. The guide lists these functions:
- Mute or unmute sound.
- Decrease or increase system volume.
- Mute or unmute the microphone.
- Reload web pages or refresh the screen.
- Enable or disable the touchpad.
- Turn airplane mode on and off.
- Open the Windows Settings app.
- Open the Windows Calculator app.
- Open the Windows snipping tool.
- Display thumbnails of all open apps.
- Open a voice assistant app. This hotkey must be used with the Fn key, and the voice assistant is not available in all countries or regions. Your model may not include this hotkey or it may not be functional.
- Open Lenovo Vantage, Lenovo PC Manager, or an app launch bar.
- Enable or disable the integrated camera.
- Lock the screen.
- Switch display devices.
- Increase or decrease screen brightness.
- Play or pause media playback.
- Stop media playback.
- Go to the next media file in the playlist or folder.
- Go to the previous media file in the playlist or folder.
- Turn the keyboard backlight on or off or adjust its brightness. This hotkey must be used with the Fn key.
Hotkey Mode
Some hotkeys share keys with the function keys (F1 to F12). Hotkey mode is a UEFI/BIOS setting that changes how hotkeys and function keys are used.
| Hotkey mode setting | How to use hotkeys | How to use function keys |
| Disabled | Hold down Fn and press one of the hotkeys. | Press the function keys directly. |
| Enabled | Press the hotkeys directly. | Hold down Fn and press one of the function keys. |
Hotkeys that do not share keys with function keys are not affected by the hotkey mode setting and should always be used with the Fn key.
Numeric Keypad
Selected computers include a numeric keypad on the far right of the keyboard for entering numbers and operators quickly. Press the NumLock key to enable or disable it.
Multi-Touch Gestures (Touch-Enabled Screens)
On selected computers with a touch screen, you can use these gestures. Not all gestures are supported by all apps.
| Gesture | Function |
| Tap | Select an item |
| Tap twice quickly | Double-click an item |
| Tap and hold | Right-click an item |
| Pinch | Zoom out |
| Spread | Zoom in |
| Tap from the left edge | View all open apps |
| Tap and hold (in the Action Center gesture) | Display the Action Center of Windows |
Power and Battery
Check the Battery Status
The battery status icon is in the Windows notification area. Click it to see the percentage of battery power remaining, view the current power plan, access battery settings and change the power mode. A warning message is displayed when the battery is low.
Charge the Battery
When the remaining battery power is low, connect the computer to ac power. The battery is fully charged in about two to four hours, depending on battery capacity, the physical environment and whether you are using the computer. The recommended temperature range for charging is between 10°C (50°F) and 35°C (95°F). You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.
To maximize battery life, once the battery is fully charged it must discharge to 94% or lower before it is allowed to recharge again. To extend battery lifespan, the battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full capacity may not be available until you discharge to as low as 20% and recharge completely. See the power section of Lenovo Vantage for more information.
Set Power Button Behavior
By default, pressing the power button puts the computer to sleep. To change this in Windows Control Panel:
- Type Control Panel in the Windows search box and press Enter. Open the Control Panel and view by large or small icons.
- Select Power Options, then click Choose what the power button does.
To wake the computer from sleep, press the power button or any key on the keyboard.
Default Power Plan (AMN7 Models)
The default power plan is Balanced. The guide lists these idle time-outs for the AMN7 models (the guide’s list writes some of these names as “IdeaPad 14 1 AMN7” and “IdeaPad 15 1 AMN7”). The plugged-in settings apply when the computer is connected to an electrical outlet; a different set applies on battery power.
| Setting | On battery power | Plugged in |
| Turn off the display | After 4 minutes | After 10 minutes |
| Put the computer to sleep | After 4 minutes | After 20 minutes |
Change or Customize a Power Plan
This applies to computers with pre-installed Windows.
- Type power plan in the Windows search box and press Enter.
- Customize a power plan of your preference.
Set Performance Mode
The computer can work in different performance modes, and performance and power consumption vary between them. Press Fn + Q to cycle through the performance modes.
UEFI/BIOS Setup Utility
UEFI/BIOS is the first program that runs when the computer starts. It initializes hardware components and loads the operating system and other programs. The setup utility lets you change certain UEFI/BIOS settings.
Open the UEFI/BIOS Setup Utility
- Turn on or restart the computer.
- When the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled, press Fn + F2.
Change the Startup Sequence
Change the startup sequence if you need the computer to start from another device or a network location.
- Open the UEFI/BIOS setup utility.
- Go to the Boot menu.
- Follow the on-screen instructions to change the order of devices under Boot Priority Order.
To change the startup sequence temporarily without opening the setup utility, start the computer and, when the Lenovo logo appears, press F12 (or Fn + F12) repeatedly.
Change Hotkey Mode
- Open the UEFI/BIOS setup utility.
- Select Configuration ➙ Hotkey Mode and press Enter.
- Change the setting to Disabled or Enabled.
- Select Exit ➙ Exit Saving Changes.
UEFI/BIOS Passwords
All passwords set in the setup utility use letters and numbers only. If you start the setup utility with the user password, you can change only a few settings.
Password Types
| Password type | Prerequisite | Usage |
| Administrator password | None | Required to start the setup utility. |
| User password | The administrator password must be set. | Can be used to start the setup utility. |
| Master hard disk password | None | Required to start the operating system. |
| User hard disk password | The master hard disk password must be set. | Can be used to start the operating system. |
Set an Administrator Password
Attention: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security ➙ Set Administrator Password and press Enter.
- Enter a password that contains only letters and numbers, then press Enter.
- Enter the password again and press Enter.
- Select Exit ➙ Exit Saving Changes.
The next time you start the computer, you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator or user password to start the computer.
Change or Remove the Administrator Password
Only the administrator can change or remove it.
- Open the UEFI/BIOS setup utility using the administrator password.
- Select Security ➙ Set Administrator Password and press Enter.
- Enter the current password.
- In the Enter New Password box, enter the new password.
- In the Confirm New Password box, enter the new password again. To remove the password, press Enter in both boxes without entering any character.
- Select Exit ➙ Exit Saving Changes.
If you remove the administrator password, the user password is also removed.
Set a User Password
The administrator password must be set first.
- Open the UEFI/BIOS setup utility using the administrator password.
- Select Security ➙ Set User Password and press Enter.
- Enter a password containing only letters and numbers, then press Enter. It must be different from the administrator password.
- Enter the password again and press Enter.
- Select Exit ➙ Exit Saving Changes.
Enable the Power-On Password
The administrator password must be set in advance.
- Open the UEFI/BIOS setup utility.
- Select Security ➙ Power on Password and press Enter.
- Change the setting to Enabled.
- Select Exit ➙ Exit Saving Changes.
Once enabled, a prompt appears every time you turn on the computer, and you must enter the administrator or user password to start it.
Set a Hard Disk Password
Attention: Be extremely careful when setting a hard disk password. If you forget it, Lenovo authorized service personnel cannot reset it or recover data from the hard disk. You must take the computer to Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security ➙ Set Hard Disk Password and press Enter. If you started the setup utility with the user password, you cannot set a hard disk password.
- Follow the on-screen instructions to set both the master and user passwords. They must be set at the same time.
- Select Exit ➙ Exit Saving Changes.
If a hard disk password is set, you must provide the correct password to start the operating system.
Change or Remove a Hard Disk Password
- Open the UEFI/BIOS setup utility.
- Select Security.
- To change or remove the master password, select Change Master Password and press Enter. If you remove the master hard disk password, the user hard disk password is also removed. To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
- Select Exit ➙ Exit Saving Changes.
Help, Recovery and Support
Quick Fixes in the Guide
| Situation | What to do |
| Computer stops responding | Press and hold the power button until the computer turns off, then restart it. |
| Liquid spilled on the computer | Carefully unplug the ac power adapter and turn off the computer immediately; the quicker you stop current flowing, the more likely you reduce short-circuit damage. Wait until you are certain all the liquid is dry before turning it on. Do not try to drain the liquid by turning the computer over. If your computer has keyboard drainage holes on the bottom, the liquid drains through them. |
| Need the latest drivers and UEFI/BIOS | Use Lenovo Vantage or Lenovo PC Manager, or the Lenovo Support website at https://support.lenovo.com. |
| Partition the storage drive | See https://support.lenovo.com/solutions/ht503851. |
Reset or Restore Windows
For Lenovo recovery options, go to https://support.lenovo.com/HowToCreateLenovoRecovery and follow the on-screen instructions. For Windows recovery options, go to https://pcsupport.lenovo.com, detect your computer or select the model manually, click Diagnostics ➙ Operating System Diagnostics, and follow the on-screen instructions.
Customer Replaceable Units (CRUs)
Customer replaceable units are parts a customer can upgrade or replace. For this product, the power cord and the ac power adapter are listed as self-service CRUs. Replacement of any other part, including the built-in rechargeable battery, must be done by a Lenovo-authorized repair facility or technician (see https://support.lenovo.com/partnerlocation). If a defective CRU must be returned, return instructions, a prepaid shipping label and a container come with the replacement, and you might be charged if Lenovo does not receive the defective part within thirty (30) days of your receipt of the replacement.
Before You Contact Lenovo
Record the product name, machine type and serial number, and note the problem details: whether it is continuous or intermittent, any error message or code, the operating system and version, the software running at the time, and whether the problem can be reproduced. During the warranty period you can call the Lenovo Customer Support Center; phone numbers by country or region are at https://pcsupport.lenovo.com/supportphonelist. Warranty-period services include problem determination, Lenovo hardware repair and engineering change management. Services not covered include use of non-Lenovo parts, identification of software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, device driver changes, and installation and maintenance of network operating systems and programs. Warranty terms are in the Safety and Warranty Guide that comes with the computer, and extra services can be purchased at https://pcsupport.lenovo.com/warrantyupgrade.
Frequently Asked Questions
How do I open the UEFI/BIOS setup utility on the IdeaPad 1 15AMN7?
Turn the computer on or restart it, and as soon as the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled on your computer, press Fn + F2 instead. You can also reach the setup utility from the Novo Button menu, which offers it as one of its choices.
How do I use the Novo button on the IdeaPad 1 15AMN7?
The Novo button sits in a small hole on the right side. Turn the computer off, open the screen, and press the Novo button to display the Novo Button menu. From there you can open UEFI/BIOS setup, the boot device selection menu or the Windows startup options screen. If you would rather not use the pinhole, turn the computer off and press Fn together with the power button.
How do I start the laptop from a different device just once?
Start the computer and press F12 repeatedly when the Lenovo logo appears (or Fn + F12 if hotkey mode is enabled). This changes the startup sequence temporarily without opening the setup utility. To make a lasting change, open UEFI/BIOS setup, go to the Boot menu, and reorder the devices under Boot Priority Order.
How do I switch performance modes?
Press Fn + Q. Each press cycles to the next performance mode, and performance and power consumption change from mode to mode.
What do the charging light colors mean?
The charging light is on the left side next to the power connector. Solid white means the computer is on ac power and the battery is at 91%–100%. Solid amber means it is on ac power and the battery is at 1%–90%. If the light is off, the computer is not connected to ac power.
How long does the battery take to charge, and why won’t it recharge right away?
A full charge takes about two to four hours, though the actual time depends on the battery capacity, the environment and whether you are using the computer. Charge the battery between 10°C (50°F) and 35°C (95°F). If the battery is full and you unplug and replug the charger, it will not start charging again until the charge has dropped to 94% or lower; this is built in to maximize battery life.
What should I do if the computer stops responding?
Press and hold the power button until the computer turns off, then restart it.
What should I do if I spill liquid on the computer?
Unplug the ac power adapter carefully and turn the computer off right away. You may lose some unsaved work, but leaving the computer on could make it unusable. Then wait until you are certain all the liquid is dry before turning it on again. Do not turn the computer over to drain the liquid. If your model has keyboard drainage holes on the bottom, the liquid will drain through them.
How do I turn the camera off or cover it?
Slide the camera cover slider across the lens to cover it, and slide it back to uncover it. You can also use the camera hotkey to enable or disable the integrated camera. The camera light is on whenever the camera is in use.
Why do my F1–F12 keys act as hotkeys, and how do I change that?
Some hotkeys share keys with F1 to F12, and the hotkey mode setting in UEFI/BIOS decides which function you get by pressing the key alone. To change it, open UEFI/BIOS setup, select Configuration ➙ Hotkey Mode, press Enter, choose Disabled or Enabled, then select Exit ➙ Exit Saving Changes. With the mode Disabled you hold Fn to use hotkeys and press function keys directly; with it Enabled you press hotkeys directly and hold Fn for function keys.
What happens if I forget the BIOS administrator password?
Lenovo authorized service personnel cannot reset it. You would have to take the computer to Lenovo authorized service personnel to have the system board replaced, bring proof of purchase and pay a fee for parts and service. Because the same kind of consequence applies to a forgotten hard disk password, including the loss of access to the data on the drive, choose these passwords carefully and keep a safe record of them.
Can I connect an external monitor to the USB-C port?
No. The USB-C connector cannot be used to connect external display devices, so use the HDMI 1.4 connector on the left side instead. HDMI 1.4 supports a maximum output resolution of 3840 × 2160 at 30 Hz with 24 bpp color depth.
