Lenovo IdeaPad 1 15IAU7
The Lenovo IdeaPad 1 15IAU7 is a 15-inch Windows laptop with a 42 Wh, 3-cell battery and a 65 W ac adapter. It has a camera with a sliding privacy cover, a USB 2.0 port, a USB 3.2 Gen 1 Type-A port, a USB-C port, an HDMI 1.4 output, an SD/MMC card slot and a combo audio jack. A Novo button opens a pre-boot menu for the UEFI/BIOS setup utility, the boot device menu and Windows recovery options. Hotkeys, a performance-mode shortcut (Fn + Q) and UEFI/BIOS password options cover everyday control and security. Some features, such as the fingerprint reader, numeric keypad and touch screen, are found only on selected models, so check your own configuration.
Computer Parts and Controls
The illustrations in the guide may look slightly different from your computer, and some parts are found only on selected models.
Front
- Wireless antennas: send and receive radio waves for the built-in wireless LAN and Bluetooth module. They are not visible from the outside of the computer. If the antennas are close to your body (less than 20 cm), the Specific Absorption Rate (SAR) values are in the Setup Guide that comes with the computer.
- Microphones: capture or record sound and voice.
- Camera: captures still and moving images for photos, video recording and video chatting.
- Camera cover slider: slide it to cover or uncover the camera lens, which helps protect your privacy.
- Camera light: when it is on, the camera is in use.
- Screen: displays text, graphics and videos. Selected models support multi-touch.
Base
- Power light: on means the computer is turned on. Off means it is turned off or in hibernation mode. Blinking means it is in sleep mode.
- Power button/fingerprint reader (selected models): press the button to turn on the computer or put it into sleep mode. The reader enrolls and reads your fingerprint for user authentication.
- Keyboard: for entering characters and using programs. It also includes hotkeys and function keys for changing settings and performing tasks quickly.
- Touchpad: performs finger touch and all the functions of a traditional mouse, and supports multi-touch.
Left Side
- Power connector: connects to power with the included power cord and ac power adapter.
- Charging light: shows whether the computer is connected to ac power (see the table below).
- USB (3.2 Gen 1) Type-A connector: connects USB devices such as a keyboard, mouse, storage device or printer.
- HDMI 1.4 connector: connects to a compatible digital audio device or video monitor, such as an HDTV.
- USB-C connector: connects external storage or data devices. An appropriate adapter may be needed. This connector cannot be used to connect external display devices.
- Combo audio jack: connects headphones or headsets with a 3.5 mm (0.14 inch), 4-pole plug. The jack does not support standalone external microphones, so if you use a headset, choose one with a single plug.
Right Side
- Power light: same behavior as the power light on the base.
- Novo button hole: press the Novo button to open the Novo Button menu, where you can choose the UEFI/BIOS setup utility, the Boot menu or the Windows startup options screen.
- SD card slot: accepts an SD card or a MultiMediaCard (MMC) for data transfer or storage.
- USB 2.0 connector: connects USB devices such as a mouse, storage device or printer.
Indicator Lights
| Light | State | Meaning |
| Power light | On | The computer is turned on. |
| Power light | Off | The computer is turned off or in hibernation mode. |
| Power light | Blinking | The computer is in sleep mode. |
| Charging light | Solid white | Connected to ac power; battery capacity 91%–100%. |
| Charging light | Solid amber | Connected to ac power; battery capacity 1%–90%. |
| Charging light | Off | Not connected to ac power. |
IdeaPad 1 15IAU7 Specifications
The values below apply to the 15IAU7 family (IdeaPad 1 15IAU7, IdeaPad 1 15IAU7 1, IdeaPad 1 15IAU7 2 and IdeaPad 15 IAU7), which is listed under machine type (MT) 82QD. Other models in the series differ in some rows, so check the model name on your own computer before relying on a value.
| Item | 15IAU7 family |
| Dimensions (W × D × thickness) | 360.2 mm × 236 mm × 17.9 mm (14.2 in × 9.3 in × 0.7 in) |
| ac power adapter input | 100 V ac–240 V ac, 50 Hz–60 Hz |
| ac power adapter output | 20 V dc, 3.25 A (65 W) |
| Battery pack | 42 Wh, 3 cells |
| Microprocessor | Type system information in the Windows search box and press Enter to view it |
| Memory | DDR4, 1 physical slot |
| Secondary storage | Solid-state drive, M.2 (2242*, 2280*), PCI Express bus |
| Screen size | 381.0 mm (15 inches) |
| Display resolution | 1366 × 768 pixels (HD), 1920 × 1080 pixels (FHD), 1920 × 1080 pixels (FHD IPS), 1920 × 1080 pixels (FHD IPS OnCell Touch) |
| Keyboard | Function keys, hotkeys, numeric keypad* |
| USB-C connector | Power output up to 5 V and 3 A; USB data transfer rate up to 5 Gbps (USB 3.2 Gen 1) |
| HDMI 1.4 connector | Maximum output of 3840 × 2160 at 30 Hz, color depth of 24 bpp (bits per pixel) |
| Other connectors and slots | Audio connector, USB 2.0 connector, USB (3.2 Gen 1) Type-A connector, memory card slot |
| Security | Fingerprint reader* |
| Network | Bluetooth, wireless LAN adapter |
The numeric keypad and fingerprint reader are for selected models. The guide prints the asterisks on the M.2 sizes as shown and does not explain them. The battery capacity is the typical or average capacity measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity shown on the product label.
USB Transfer Rate
The actual transfer rate on each USB connector depends on the processing capability of the host and peripheral devices, file attributes and other system and environment factors, and will be slower than the listed data rate. The listed rates are 0.48 Gbit/s for USB 2.0 and 5 Gbit/s for USB 3.2 Gen 1.
Operating Environment
| Condition | Value |
| Maximum altitude (without pressurization) | 3048 m (10 000 ft) |
| Operating temperature, up to 2438 m (8000 ft) | 5°C to 35°C (41°F to 95°F) |
| Storage temperature, up to 2438 m (8000 ft) | 5°C to 43°C (41°F to 109°F) |
| Maximum operating temperature above 2438 m (8000 ft), unpressurized | 31.3°C (88°F) |
| Relative humidity, operating | 8% to 95% at wet-bulb temperature 23°C (73°F) |
| Relative humidity, storage | 5% to 95% at wet-bulb temperature 27°C (81°F) |
When you charge the battery, its temperature must be no lower than 10°C (50°F).
Avoid Constant Contact With Hot Sections
CAUTION: While the computer is operating, place it on a hard, flat surface so its bottom is not in contact with your bare skin. Under normal operating conditions the bottom surface stays within the range defined in IEC 62368-1, but it can still be hot enough to cause discomfort or harm if touched directly for over one minute at a time. Avoid prolonged direct contact with the bottom of the computer.
Getting Started With Windows
The instructions in the guide are based on the Windows operating system and do not apply if you install and use another operating system. Because Microsoft changes Windows through Windows Update, some Windows steps may become outdated.
Basic Windows Settings
To change a setting, type its keyword in the Windows search box, select the best match and follow the on-screen instructions.
| Function | What it does | Search keyword |
| Control Panel | View or change Windows settings, including hardware and software setup. | Control Panel |
| Connect to Wi-Fi networks | Click the network icon in the Windows notification area and select a network. The wireless LAN module may support different standards, and in some countries or regions 802.11ax may be disabled by local regulations. | Wi-Fi |
| Airplane mode | Turns all wireless communications on and off, for example when boarding an airplane. | Airplane mode |
| Night light mode | Shows warmer screen colors and reduces emitted blue light, which lowers the chance of eye fatigue or eye strain. | Night light |
| Adjust color temperature | Available when night light is on. Selected Lenovo computers are low blue light certified and are tested with night light on and the color temperature at the default value of 48. | Night light |
| Windows Updates | Updates that apply to your Windows version download automatically when you are online, and you are prompted to restart to install them. You can also check manually. | Windows Updates |
Attention: Only use Windows Update to download and install updates. Updates from other sources may include security risks.
Optional Windows Settings
- Enroll your fingerprint: on models with a fingerprint reader, enroll a fingerprint for Windows sign-in. Search for Sign-in options.
- Windows help: type Get Help or Tips in the Windows search box and press Enter, or visit https://support.microsoft.com.
Lenovo Vantage and Lenovo PC Manager
Both are Lenovo apps for viewing product information and system status, managing device settings, and checking for and performing system updates. In Lenovo PC Manager you can check for and perform driver updates. Depending on the country or region where the computer was purchased, one of the two may be pre-installed. To open it, type its name in the Windows search box and select the match. If neither is pre-installed you can install one yourself, and Lenovo Vantage is a free download from the Microsoft Store. App features can change with updates and may not be available on all Lenovo products.
The Novo Button Menu
The Novo Button menu appears before the operating system starts. From it you can open the UEFI/BIOS setup utility, open the boot device selection menu, or open the Windows startup options screen. From the Windows startup options screen you can then start from a recovery drive, reset the computer, or open the advanced options screen.
To open the menu:
- Turn off the computer.
- Open the screen and press the Novo button (the small hole on the right side).
Alternatively, turn off the computer and press Fn and the power button.
Keyboard Hotkeys, Numeric Keypad and Touch Gestures
Keyboard Hotkeys
Some keys are printed with icons. These hotkeys can be pressed alone or together with the Fn key to open certain apps or change settings quickly. The icon on each key shows its function, and the guide lists these functions:
- Mute or unmute sound.
- Decrease or increase system volume.
- Mute or unmute the microphone.
- Reload web pages or refresh the screen.
- Enable or disable the touchpad.
- Turn airplane mode on and off.
- Open the Windows Settings app.
- Open the Windows Calculator app.
- Open the Windows snipping tool.
- Display thumbnails of all open apps.
- Open a voice assistant app. This hotkey must be used with the Fn key, and the app is not available in all countries or regions. Your model may not include this hotkey or it may not be functional.
- Open Lenovo Vantage, Lenovo PC Manager or an app launch bar.
- Enable or disable the integrated camera.
- Lock the screen.
- Switch display devices.
- Increase or decrease screen brightness.
- Play or pause media playback.
- Stop media playback.
- Go to the next or previous media file in the playlist or folder.
- Turn the keyboard backlight on or off, or adjust its brightness. This hotkey must be used with the Fn key.
Hotkey Mode
Some hotkeys share keys with the function keys (F1 to F12). Hotkey mode is a UEFI/BIOS setting that changes how they are used.
| Hotkey mode setting | To use hotkeys | To use function keys |
| Disabled | Hold down Fn and press a hotkey. | Press the function keys directly. |
| Enabled | Press the hotkeys directly. | Hold down Fn and press a function key. |
Hotkeys that do not share keys with function keys are not affected by this setting and should always be used with the Fn key. To change the setting, see the UEFI/BIOS section below.
Numeric Keypad
Some Lenovo computers include a dedicated numeric keypad on the far right of the keyboard for entering numbers and operators quickly. Press the NumLock key to enable or disable it.
Multi-Touch Gestures
Selected models have a touch-enabled screen (the FHD IPS OnCell Touch display option). Not all gestures are supported by all apps.
| Gesture | Function |
| Tap | Select an item |
| Tap twice quickly | Double-click an item |
| Tap and hold | Right-click an item |
| Pinch | Zoom out |
| Spread | Zoom in |
| Tap from the left edge | View all open apps |
Power and Battery
Check the Battery Status
The battery status icon is in the Windows notification area. Click it to see the percentage of battery power remaining, view the current power plan, change the power mode and open battery settings. A warning message appears when the battery is low.
Charge the Battery
When battery power is low, connect the computer to ac power. The battery is fully charged in about two to four hours, depending on battery capacity, the physical environment and whether you are using the computer. The recommended temperature range for charging is 10°C (50°F) to 35°C (95°F). You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.
- To maximize battery life, once the battery is fully charged it must discharge to 94% or lower before it is allowed to recharge.
- To extend battery lifespan, the battery may optimize its full charge capacity based on your usage. After prolonged periods of limited use, full capacity may not be available until you discharge to as low as 20% and recharge completely. See the power section of Lenovo Vantage for more information.
Set Power Button Behavior
By default, pressing the power button puts the computer to sleep. To change this in Windows Control Panel:
- Type Control Panel in the Windows search box and press Enter. Open Control Panel and view by large or small icons.
- Select Power Options, then click Choose what the power button does.
Power Plan Defaults
A power plan is a collection of power-saving settings that sets idle time-outs for hardware components. The default plan is Balanced. For the 15IAU7 family (IdeaPad 1 15IAU7, 15IAU7 1, 15IAU7 2 and IdeaPad 15 IAU7), the default time-outs are:
| Action | On battery power | Plugged in |
| Turn off the display | After 4 minutes | After 10 minutes |
| Put the computer to sleep | After 4 minutes | After 10 minutes |
To wake the computer from sleep, press the power button or any key. To change a power plan on a computer with pre-installed Windows, type power plan in the Windows search box, press Enter, and customize the plan to your preference.
Set Performance Mode
The computer can work in different performance modes, and performance and power consumption vary between them. Press Fn + Q to cycle through the modes.
UEFI/BIOS Setup Utility and Passwords
UEFI/BIOS is the first program that runs when the computer starts. It initializes the hardware and loads the operating system. Your computer may include a setup utility for changing certain UEFI/BIOS settings.
Open the UEFI/BIOS Setup Utility
- Turn on or restart the computer.
- When the Lenovo logo appears, press F2 repeatedly. If hotkey mode is enabled, press Fn + F2 instead.
Change the Startup Sequence
- Open the UEFI/BIOS setup utility.
- Go to the Boot menu.
- Follow the on-screen instructions to change the order of devices under Boot Priority Order.
To change the startup sequence only for the current start, without opening the setup utility, start the computer and press F12 (or Fn + F12) repeatedly when the Lenovo logo appears.
Change Hotkey Mode
- Open the UEFI/BIOS setup utility.
- Select Configuration, then Hotkey Mode, and press Enter.
- Change the setting to Disabled or Enabled.
- Select Exit, then Exit Saving Changes.
Password Types
| Password type | Prerequisite | Use |
| Administrator password | None | Required to start the setup utility. |
| User password | The administrator password must be set. | Can be used to start the setup utility. |
| Master hard disk password | None | Required to start the operating system. |
| User hard disk password | The master hard disk password must be set. | Can be used to start the operating system. |
All setup utility passwords use letters and numbers only. If you start the setup utility with the user password, you can change only a few settings.
Set the Administrator Password
Attention: If you forget the administrator password, Lenovo authorized service personnel cannot reset it. You must take the computer to Lenovo authorized service personnel to have the system board replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the UEFI/BIOS setup utility.
- Select Security, then Set Administrator Password, and press Enter.
- Enter a password containing only letters and numbers, then press Enter.
- Enter the password again and press Enter.
- Select Exit, then Exit Saving Changes.
From then on you must enter the administrator password to open the setup utility. If Power on Password is enabled, you must enter the administrator or user password to start the computer.
Change or Remove the Administrator Password
Only the administrator can do this. If you remove the administrator password, the user password is also removed.
- Open the setup utility using the administrator password.
- Select Security, then Set Administrator Password, and press Enter.
- Enter the current password.
- In the Enter New Password box, enter the new password.
- In the Confirm New Password box, enter it again. To remove the password, press Enter in both boxes without typing any character.
- Select Exit, then Exit Saving Changes.
Set the User Password
Set the administrator password first. The user password must be different from the administrator password.
- Open the setup utility using the administrator password.
- Select Security, then Set User Password, and press Enter.
- Enter a password containing only letters and numbers, then press Enter.
- Enter the password again and press Enter.
- Select Exit, then Exit Saving Changes.
Enable the Power-On Password
The administrator password must be set in advance.
- Open the setup utility.
- Select Security, then Power on Password, and press Enter.
- Change the setting to Enabled.
- Select Exit, then Exit Saving Changes.
Once enabled, a prompt appears every time you turn on the computer, and you must enter the administrator or user password to start it.
Set the Hard Disk Password
Attention: Be extremely careful with this password. If you forget it, Lenovo authorized service personnel cannot reset it or recover data from the hard disk. You must take the computer to Lenovo authorized service personnel to have the hard disk drive replaced. Proof of purchase is required and a fee is charged for parts and service.
- Open the setup utility. If you start it with the user password, you cannot set a hard disk password.
- Select Security, then Set Hard Disk Password, and press Enter.
- Follow the on-screen instructions to set both the master and user passwords. They must be set at the same time.
- Select Exit, then Exit Saving Changes.
Once set, you must enter the correct password to start the operating system.
Change or Remove the Hard Disk Password
- Open the setup utility and select Security.
- To change or remove the master password, select Change Master Password and press Enter. Removing the master hard disk password also removes the user hard disk password.
- To change the user password, select Change User Password and press Enter. The user hard disk password cannot be removed separately.
- Select Exit, then Exit Saving Changes.
Help, Support and Replaceable Parts
Common Problems in the Guide
- Computer stops responding: press and hold the power button until the computer turns off, then restart it.
- Liquid spilled on the computer: see the FAQ below for the full steps.
- Partitioning the storage drive: see https://support.lenovo.com/solutions/ht503851.
- Latest drivers and UEFI/BIOS: use Lenovo Vantage or Lenovo PC Manager, or the Lenovo Support website at https://support.lenovo.com.
Self-Help Resources
- Troubleshooting and frequently asked questions: https://www.lenovo.com/tips and https://forums.lenovo.com.
- Accessibility information: https://www.lenovo.com/accessibility.
- Lenovo recovery options: go to https://support.lenovo.com/HowToCreateLenovoRecovery and follow the on-screen instructions.
- Windows recovery options: go to https://pcsupport.lenovo.com, detect your computer or select the model manually, click Diagnostics, then Operating System Diagnostics, and follow the on-screen instructions.
- Lenovo Vantage or Lenovo PC Manager: download and install the latest drivers and firmware, configure hardware settings, diagnose hardware problems and check warranty status.
- Product documentation (Generic Safety and Compliance Notices, Safety and Warranty Guide, Setup Guide, this User Guide and the Regulatory Notice): go to https://support.lenovo.com, detect or select your model, select Documentation and filter the list.
Customer Replaceable Units (CRUs)
CRUs are parts you can upgrade or replace yourself. For this product model the guide lists the power cord and the ac power adapter as self-service CRUs. Replacement of any part not listed, including the built-in rechargeable battery, must be done by a Lenovo-authorized repair facility or technician (https://support.lenovo.com/partnerlocation). If a returned part is required, return instructions, a prepaid shipping label and a container come with the replacement CRU, and you might be charged if Lenovo does not receive the defective part within thirty (30) days of your receipt of the replacement. See the Lenovo Limited Warranty at https://www.lenovo.com/warranty/llw_02 for full details.
Before You Contact Lenovo
Record your product name, machine type and serial number, which are usually on a label or etched on the bottom of the computer. Also note what the problem is and whether it is continuous or intermittent, any error message or code, your operating system and version, which software was running, and whether and how the problem can be reproduced.
Lenovo Customer Support Center
During the warranty period you can call the Lenovo Customer Support Center. Phone numbers by country or region are at https://pcsupport.lenovo.com/supportphonelist and can change without notice.
- Services during the warranty period: problem determination, Lenovo hardware repair and engineering change management.
- Services not covered: replacement or use of parts not made for or by Lenovo or nonwarranted parts, identification of software problem sources, UEFI/BIOS configuration as part of an installation or upgrade, changes or upgrades to device drivers, installation and maintenance of network operating systems, and installation and maintenance of programs.
For warranty terms, see Warranty information in the Safety and Warranty Guide that comes with the computer. Additional services can be purchased at https://pcsupport.lenovo.com/warrantyupgrade, and availability and names vary by country or region.
Quebec consumers: Lenovo does not guarantee the availability of replacement parts, repair services or the information needed to maintain or repair the goods. See https://support.lenovo.com/ca/en for current support and parts information.
Frequently Asked Questions
How do I open the Novo Button menu on the IdeaPad 1 15IAU7?
Turn the computer off completely, open the screen, and press the Novo button, which sits in a small hole on the right side. If you would rather not reach for the button, turn the computer off and press Fn and the power button together. The menu lets you open the UEFI/BIOS setup utility, the boot device menu or the Windows startup options screen, where you can start from a recovery drive, reset the computer or open the advanced options screen.
How do I enter the UEFI/BIOS setup utility?
Turn the computer on or restart it, and press F2 repeatedly as soon as the Lenovo logo appears. If hotkey mode is enabled, press Fn + F2 instead. The Novo Button menu is another route in, since it lists the setup utility as one of its choices.
How do I start the computer from a different device or change the boot order?
For a one-time change, start the computer and press F12 repeatedly when the Lenovo logo appears (Fn + F12 if hotkey mode is enabled). To make a lasting change, open the UEFI/BIOS setup utility, go to the Boot menu and follow the on-screen instructions to reorder the devices under Boot Priority Order, then choose Exit and Exit Saving Changes so the new order is kept.
What do the power light and charging light mean?
The power light is on when the computer is on, off when it is turned off or in hibernation, and blinking when it is in sleep mode. The charging light is solid white when the computer is on ac power and the battery is at 91%–100%, solid amber when it is on ac power and the battery is at 1%–90%, and off when the computer is not connected to ac power.
How long does it take to charge the battery, and what temperature is best?
A full charge takes about two to four hours, though the actual time depends on the battery capacity, the surroundings and whether you are using the computer while it charges. Charging works best between 10°C (50°F) and 35°C (95°F), and the battery temperature must be at least 10°C (50°F) for charging. Lenovo Vantage or Lenovo PC Manager can show the battery temperature.
Why won’t the battery start charging again right after it was full?
This is a battery-life feature rather than a fault. Once the battery is fully charged, it has to discharge to 94% or lower before it is allowed to recharge. The battery may also optimize its full charge capacity based on how you use it, and after long periods of limited use the full capacity may not be available until you discharge to as low as 20% and then recharge completely.
How do I change what the power button does?
By default the power button puts the computer to sleep. To change it, type Control Panel in the Windows search box, press Enter, and view by large or small icons. Open Power Options and click Choose what the power button does, then pick the behavior you want.
What should I do if the computer stops responding?
Press and hold the power button until the computer turns off, then restart it.
What should I do if I spill liquid on the computer?
Carefully unplug the ac power adapter and turn the computer off immediately. The faster the current is stopped, the more likely you are to reduce damage from short circuits. You might lose some unsaved work, but leaving the computer on could make it unusable. Then wait until you are certain all the liquid is dry before turning it on again. Do not try to drain the liquid by turning the computer over. If your computer has keyboard drainage holes on the bottom, the liquid will drain out through them.
How do I use the F1–F12 keys without holding Fn?
Change hotkey mode in the UEFI/BIOS setup utility. Open the utility, select Configuration, then Hotkey Mode, press Enter and set it to Disabled or Enabled, then select Exit and Exit Saving Changes. With the mode Disabled, the function keys work when pressed directly and hotkeys need Fn. With it Enabled, hotkeys work directly and the function keys need Fn. Hotkeys that do not share a key with a function key always need Fn.
Can I connect an external monitor to the USB-C port?
No. The USB-C connector is for external storage or data devices, and it cannot be used to connect external display devices. Use the HDMI 1.4 connector instead, which supports output up to 3840 × 2160 at 30 Hz with a color depth of 24 bpp. An appropriate adapter may be needed for some devices on the USB-C connector.
What happens if I forget the administrator or hard disk password?
Lenovo authorized service personnel cannot reset either password. For a forgotten administrator password, you must take the computer to Lenovo authorized service personnel to have the system board replaced. For a forgotten hard disk password, the hard disk drive must be replaced and the data on it cannot be recovered. Proof of purchase is required and a fee is charged for parts and service in both cases.
