Digital Electric Kettle BVST-EK5967

Oster Digital Electric Kettle BVST-EK5967

The Oster Digital Electric Kettle BVST-EK5967 is a household electric kettle designed for heating and boiling water at a selected temperature. It features a digital temperature display, adjustable temperature controls, an illuminated power button, and an automatic shut-off function.

The kettle has a removable, washable anti-scale filter positioned near the pouring spout. This filter helps reduce mineral scale particles that may enter beverages or food when hot water is poured.

The digital display shows a default temperature setting of 212°F when the kettle is placed on its powered base. The temperature can be adjusted using the control buttons before heating begins. Once the water reaches the selected temperature, the kettle automatically switches off.

The appliance also includes boil-dry protection, a water-level indicator, and a multidirectional power base suitable for left- or right-handed use.

Proper operation requires correct water filling, secure lid placement, suitable temperature selection, and regular cleaning to remove mineral deposits.

Technical Specifications

The kettle must be filled within its marked water-level limits. It must never be operated without sufficient water or filled above the MAX marking.

Parts and Components

The Oster BVST-EK5967 has several components used for filling, heating, pouring, temperature adjustment, and cleaning.

Digital Temperature Display

The digital temperature display is located near the handle.

When the power base is connected to an electrical outlet and the kettle is placed on it, the display illuminates.

The default temperature setting is 212°F.

Temperature adjustments can be made using the buttons below the digital display.

After the selected temperature has been reached, the display remains illuminated for approximately 10 minutes while showing the current water temperature.

Temperature Control Buttons

The kettle includes temperature adjustment buttons marked with Plus (+) and Minus (−) symbols.

These buttons are used to change the desired water temperature.

The selected temperature is shown on the digital display.

Illuminated Power Button

The power button controls the heating cycle.

Pressing the button downward starts heating.

During operation, the power light pulses to indicate that the kettle heater is on.

When the selected temperature is reached, the appliance automatically switches off.

Water-Level Indicator

The water-level indicator allows the amount of water inside the kettle to be checked.

The water must remain between the minimum and maximum permitted levels.

Overfilling may cause boiling water to escape through the spout.

Removable Anti-Scale Filter

A removable mesh filter is installed near the pouring spout.

The filter helps prevent loose mineral scale particles from entering beverages or food when water is poured.

It can be removed, rinsed, and cleaned using a soft brush.

Multidirectional Power Base

The power base supports the kettle and provides its electrical connection.

Its multidirectional design accommodates both left- and right-handed use.

The base includes cord storage and a cable exit arrangement that allows it to rest flat on a countertop.

Important Safety Instructions

The Oster BVST-EK5967 uses electricity to heat water to high temperatures. Incorrect handling can cause fire, electrical shock, burns, or other injuries.

The following safety instructions must be followed during operation.

General Safety Precautions

1. All operating and safety instructions must be read before using the kettle.
2. Hot surfaces must not be touched. The handle and controls must be used when handling the appliance.
3. The kettle and power base must never be immersed in water or another liquid.
4. Close adult supervision is required whenever the kettle is used by or near children.
5. The power base must be unplugged when the kettle is not in use, before repositioning, and before cleaning.
6. The appliance must cool before its components are removed, installed, or cleaned.
7. A kettle with a damaged power cord, damaged plug, malfunction, or other damage must not be operated.
8. A damaged appliance must be examined or repaired by an authorized service center.
9. Accessories not recommended by the manufacturer must not be used.
10. The kettle must not be operated outdoors.
11. The electrical cord must not hang over the edge of a table or countertop or touch heated surfaces.
12. The appliance must not be placed on or near a hot gas burner, electric burner, or heated oven.
13. The kettle must be used only for its intended household purpose.

Hot Water and Steam Safety

Hot water and steam can cause serious burns.

The following precautions apply:

• The kettle must be handled carefully while water is heating, boiling, or cooling.
• The lid must remain securely closed during operation.
• The pouring spout must be directed away from people.
• The kettle body must not be touched while hot.
• The handle must always be used when lifting or carrying the kettle.
• Extreme caution is required when moving or pouring from a kettle containing boiling water.
• The lid must not be removed during the heating cycle.

Warning: Removing the lid while the kettle is heating can release steam and cause scalding.

Water Filling Safety

The kettle is intended for boiling water only.

The manufacturer specifies the following restrictions:

• Milk and other liquids must not be heated inside the kettle.
• Food must not be cooked in the appliance.
• The water level must never exceed the MAX marking.
• The kettle must not be operated with water below its minimum marking.
• The kettle must be removed from the power base before filling or pouring.
• The kettle must not be removed from its base until it has switched off manually or automatically.

Power Button Safety

The power button must not be held down during operation.

Holding the button in its operating position may damage the automatic shut-off mechanism.

The kettle must be allowed to switch off automatically when the selected temperature is reached.

Safe Appliance Placement

The kettle must be placed on a hard, flat, and level surface.

This allows air to circulate beneath the appliance.

The kettle must also remain well back from the edge of the countertop.

It must never be positioned near hot cooking surfaces.

Power Base Safety

Only the power base supplied with the kettle may be used.

The supplied power base must not be used with a different appliance.

Before the kettle is connected to electrical power, it must be positioned correctly on its base.

Electrical Cord Safety

The kettle includes a short power cord to reduce the risk of entanglement and tripping.

If an extension cord is used, the following requirements apply:

To disconnect the kettle, all controls must be switched off before the electrical plug is removed from the outlet.

Before First Use

The Oster Digital Electric Kettle must be cleaned before preparing water for consumption.

Initial preparation involves washing the interior and lid, boiling fresh water, and discarding the initial boiled water.

Cleaning Before First Use

1. Remove the kettle from its power base.
2. Make sure the power base is unplugged.
3. Open the kettle lid.
4. Wash the kettle interior and lid using mild detergent and water.
5. Rinse both components thoroughly.
6. Do not immerse the kettle or power base in water.
7. Do not place any component in a dishwasher.

Initial Boiling Procedure

After the kettle has been cleaned:

1. Fill the kettle with fresh water up to the MAX marking.
2. Connect the power base to an electrical outlet.
3. Place the kettle correctly on the power base.
4. Check that the digital display illuminates and shows the default setting of 212°F.
5. Press the power button downward.
6. Confirm that the power light begins pulsing.
7. Allow the water to boil.
8. Wait for the kettle to switch off automatically when the water reaches 212°F.
9. Allow the kettle and water to cool.
10. Discard the boiled water.
11. Rinse the interior with cold water.
12. Repeat the boiling and rinsing procedure.

After the initial cleaning cycles, the kettle is ready for normal operation.

Setup and Installation Instructions

The kettle must be correctly positioned and connected before heating begins.

Step 1: Position the Power Base

Place the power base on a flat, heat-resistant surface.

The base should be positioned as close as practical to a suitable electrical outlet.

Step 2: Arrange the Power Cord

The power base has built-in cord-routing channels.

The cord must follow the exit pattern provided in the base.

Correct cord placement allows the power base to sit flat when the kettle is installed.

Important: The kettle must not be operated if the power base does not rest flat.

If the base is uneven:

1. Remove the kettle from the base.
2. Check the cord-routing arrangement.
3. Reposition the electrical cord.
4. Confirm that the base rests flat before replacing the kettle.

Step 3: Fill the Kettle

1. Remove the kettle from the power base.
2. Open the lid.
3. Pour fresh water into the kettle.
4. Check the amount using the water-level indicator.
5. Keep the water between the minimum and MAX markings.

Step 4: Close the Lid

Close the lid securely.

The lid must remain firmly closed while water is heating.

Warning: The kettle may not switch off automatically if the lid is left open.

Step 5: Place the Kettle on the Base

Position the kettle correctly on the supplied power base.

The multidirectional connection allows placement for left- or right-handed use.

Step 6: Connect Electrical Power

Insert the power cord into an electrical outlet.

The digital display will illuminate and show the default temperature setting of 212°F.

How to Use the Oster BVST-EK5967 Digital Electric Kettle

The kettle heats water to a selected temperature and switches off automatically when that temperature is reached.

Step 1: Fill with Water

Remove the kettle from its power base.

Open the lid and add the desired amount of fresh water.

The water must not exceed the MAX marking or fall below the minimum marking.

Step 2: Close the Lid

Make sure the lid is firmly closed before starting the heating cycle.

Step 3: Position the Kettle

Place the filled kettle correctly on the power base.

Check that the base is stable and level.

Step 4: Check the Digital Display

Connect the power base to an electrical outlet.

The digital display illuminates and initially shows 212°F.

This is the default temperature setting.

Step 5: Select the Desired Water Temperature

Use the temperature control buttons to adjust the temperature.

The selected temperature appears on the digital display.

If boiling water is required, the default 212°F setting may be used.

Step 6: Start the Heating Cycle

Press the power button downward.

The illuminated power button begins pulsing to indicate that the kettle heater is operating.

Step 7: Allow the Water to Heat

The kettle continues heating until the water reaches the selected temperature.

During operation:

• The lid must remain securely closed.
• The kettle must remain positioned on its power base.
• The power button must not be held down.
• The water level must remain within the permitted markings.

Step 8: Automatic Shut-Off

When the water reaches the selected temperature, the kettle automatically switches off.

The power light stops indicating active heating.

The digital display remains illuminated for approximately 10 minutes and shows the current water temperature.

Step 9: Remove the Kettle

After the kettle switches off:

1. Carefully grasp the handle.
2. Lift the kettle from the power base.
3. Keep the spout directed away from people.

The kettle body may remain very hot.

Step 10: Pour the Heated Water

Carefully pour the heated water through the spout into the intended container.

The kettle must be carried using its handle only.

Step 11: Return the Kettle to Its Base

When the kettle is removed from the power base, the digital temperature display switches off.

When the kettle is placed back on the powered base, the display returns to the default temperature setting of 212°F.

Step 12: Heat Water Again

The kettle does not automatically begin another heating cycle.

To reheat water:

1. Wait approximately 25 seconds to allow the kettle to cool.
2. Check that the kettle contains sufficient water.
3. Place it correctly on the power base.
4. Select the desired temperature.
5. Press the power button to start heating.

Digital Temperature Control Instructions

The digital temperature control allows the kettle to heat water to a selected temperature.

How to Change the Temperature

1. Place the kettle on its powered base.
2. Wait for the digital display to illuminate.
3. Confirm that the display initially shows 212°F.
4. Use the temperature control buttons to adjust the desired setting.
5. Check the selected temperature on the display.
6. Press the power button to begin heating.

The kettle will automatically switch off when the selected temperature is reached.

Default Temperature Setting

The default temperature is 212°F.

This setting appears when the kettle is placed on the powered base.

The default setting also returns when the kettle is removed from the base and subsequently replaced.

Heating Indicator

The illuminated power button provides a visual indication of heating activity.

Automatic Shut-Off Function

The Oster BVST-EK5967 includes an automatic shut-off mechanism.

The kettle switches off when the water reaches the selected temperature.

How Automatic Shut-Off Works

1. The selected temperature is entered using the temperature controls.
2. The power button is pressed.
3. The heater begins operating.
4. The water temperature increases.
5. When the selected temperature is reached, the kettle automatically switches off.

Conditions Required for Automatic Shut-Off

The kettle lid must remain firmly closed.

The automatic shut-off mechanism may not work correctly if the lid is left open.

The power button must also remain free to operate normally.

Important: Holding the power button down can damage the automatic shut-off mechanism.

Boil-Dry Protection

The kettle includes a boil-dry safety device designed to stop operation if insufficient water remains inside.

How Boil-Dry Protection Works

If the kettle operates without enough water and boils dry, the safety device automatically switches it off.

The kettle remains switched off until it is refilled with at least the minimum required amount of water.

What to Do If the Kettle Boils Dry

If boil-dry protection activates:

1. Allow the kettle to switch off automatically.
2. Disconnect electrical power.
3. Allow the kettle to cool for approximately 30 minutes.
4. Refill the kettle with at least the minimum amount of water.
5. Place the kettle back on its power base.
6. Resume operation using the normal heating procedure.

Warning: The kettle must always cool for half an hour before reuse after boiling dry.

Removable Anti-Scale Filter

The Oster BVST-EK5967 has a removable mesh filter near the pouring spout.

The filter reduces the amount of scale residue that may enter beverages or food when heated water is poured.

Purpose of the Filter

Minerals naturally present in tap water may produce scale deposits after repeated heating.

The anti-scale filter helps reduce the amount of loose residue passing through the spout.

To reduce scale buildup, remaining water should be emptied after boiling.

When to Clean the Filter

The required cleaning frequency depends on the water supply and how often the kettle is used.

The filter should be cleaned when:

• Visible deposits accumulate on the mesh.
• Scale residue becomes noticeable.
• The rate of pouring decreases.

How to Remove and Clean the Kettle Filter

The kettle must be switched off, unplugged, emptied, and allowed to cool completely before filter removal.

Removing the Filter

1. Switch off the kettle.
2. Disconnect the power base from the electrical outlet.
3. Allow the kettle to cool completely.
4. Empty the remaining water.
5. Open the lid.
6. Grip the upper section of the filter using the thumb and index finger.
7. Gently pull the filter upward.
8. Hold the kettle steady if necessary while removing the filter.

Caution: Fingers must be kept away from the filter mesh. Pressing directly into the mesh can damage it.

Excessive force must not be used when removing the filter because it may damage the filter or lid.

Cleaning the Filter

1. Hold the removed filter under running tap water.
2. Gently brush the mesh using a soft brush.
3. Remove visible mineral deposits and residue.
4. Rinse thoroughly with clean water.

The filter must be washed by hand only.

Reinstalling the Filter

1. Hold the cleaned filter using the thumb and index finger.
2. Position it correctly inside the kettle.
3. Gently push it back into place.
4. Continue until a clicking sound is heard.
5. Lightly pull the filter to confirm that it is securely attached.
6. Rinse the kettle interior with fresh water.

The kettle is ready for use after the filter has been correctly reinstalled.

Care and Cleaning Instructions

Regular cleaning helps maintain the kettle’s exterior surfaces and remove mineral deposits from the interior.

The kettle must be switched off, disconnected from electrical power, and allowed to cool before cleaning.

Cleaning the Kettle Exterior

1. Remove the kettle from its power base.
2. Disconnect the power base from the electrical outlet.
3. Allow the appliance to cool.
4. Wipe the kettle exterior using a soft, damp cloth.

The kettle and power base must never be immersed in water or another liquid.

Cleaning Precautions

The manufacturer prohibits using the following cleaning materials:

• Chemical cleaners
• Steel wool
• Abrasive cleaners

These restrictions apply to the kettle and power base.

Important: No components of the kettle are dishwasher safe.

How to Descale the Oster BVST-EK5967 Electric Kettle

Minerals in tap water can accumulate inside the kettle after repeated use.

These deposits, commonly called scale, can be removed using the manufacturer’s vinegar-and-water cleaning procedure.

Descaling Solution

The cleaning solution contains:

Step-by-Step Descaling Instructions

1. Switch off the kettle.
2. Disconnect the electrical power.
3. Allow the kettle to cool.
4. Prepare a solution containing 3 cups of white vinegar and 3 cups of water.
5. Pour the solution into the kettle.
6. Allow it to remain inside overnight.
7. Empty the vinegar solution.
8. Wipe any remaining interior stains using a damp cloth.
9. Fill the kettle with clean water.
10. Place the kettle on its power base.
11. Bring the clean water to a boil.
12. Discard the boiled water.
13. Repeat the clean-water boiling and discarding procedure.

After the cleaning and rinsing cycles, the kettle is ready for use.

Removing Remaining Mineral Stains

If stains remain after the vinegar solution has been emptied, the interior may be wiped using a damp cloth.

Chemical cleaners, steel wool, and abrasive cleaning products must not be used.

Reducing Scale Buildup

To reduce mineral deposits:

• Empty remaining water after boiling.
• Clean the anti-scale filter when deposits become noticeable.
• Clean the filter if water begins pouring more slowly.
• Remove interior scale using the specified vinegar-and-water method.

Maintenance and Storage Instructions

Proper maintenance includes filter cleaning, mineral deposit removal, and careful handling of the electrical components.

Routine Maintenance

The following maintenance tasks are recommended:

1. Empty remaining water after use.
2. Check the anti-scale filter for mineral deposits.
3. Clean the filter when residue becomes visible.
4. Remove interior scale using the recommended cleaning solution.
5. Wipe the exterior with a soft, damp cloth.
6. Check that the lid closes securely before heating.
7. Keep the power button free from obstructions.
8. Keep the power base dry and properly positioned.

Storing the Kettle

Before storing the appliance:

1. Switch the kettle off.
2. Disconnect the power base from the electrical outlet.
3. Allow the kettle to cool completely.
4. Empty any remaining water.
5. Clean the kettle if necessary.
6. Keep the kettle and power base dry.
7. Arrange the electrical cord using the storage area provided beneath the base.

Troubleshooting Guide

The following troubleshooting information addresses operating conditions and corrective procedures described in the manufacturer’s instructions.

Kettle Does Not Shut Off Automatically

The kettle may fail to switch off if the lid is left open.

The lid must remain securely closed during heating.

The power button must not be held down because this may damage the automatic shut-off mechanism.

Kettle Does Not Immediately Reheat

After heating, the kettle requires a short cooling period before another cycle.

The manufacturer recommends waiting approximately 25 seconds before pressing the power button again.

Digital Display Turns Off When the Kettle Is Removed

The digital display switches off when the kettle is lifted from the power base.

When the kettle is returned to the powered base, the display shows the default temperature setting of 212°F.

This is the operating behavior specified for the appliance.

Kettle Stops After Running Dry

The boil-dry protection device automatically switches off the heater when an insufficient water condition is detected.

The kettle must be allowed to cool for approximately 30 minutes before being refilled and used again.

Water Pours Slowly

A reduction in pouring speed may indicate scale buildup on the removable mesh filter.

The filter should be removed and cleaned under running water using a soft brush.

Mineral Deposits Inside the Kettle

Repeated heating of tap water may cause mineral deposits to accumulate.

The manufacturer recommends descaling with 3 cups of white vinegar and 3 cups of water, followed by overnight soaking and fresh-water boiling cycles.

When to Contact Customer Service

The kettle must not be operated if:

• The electrical cord or plug is damaged.
• The appliance malfunctions.
• The kettle has been damaged in another way.

The appliance must be referred to an authorized service center for examination, repair, or adjustment.

Warranty Information

The Oster BVST-EK5967 Digital Electric Kettle is covered by a 1-year limited warranty provided by Sunbeam Products, Inc., doing business as Jarden Consumer Solutions.

Warranty Coverage

The manufacturer warrants that the appliance will be free from defects in materials and workmanship for one year from the original retail purchase date.

During the warranty period, the manufacturer may:

• Repair a defective product or component.
• Replace it with a new or remanufactured product or component.
• Provide a similar product of equal or greater value if the original model is no longer available.

The manufacturer determines whether a defective product will be repaired or replaced.

Warranty Eligibility

The warranty applies to the original retail purchaser.

It begins on the original purchase date and is not transferable.

The original sales receipt must be retained because proof of purchase is required for warranty service.

Warranty Exclusions

The manufacturer’s limited warranty does not cover normal wear of parts or damage resulting from:

• Negligent operation
• Misuse of the appliance
• Incorrect electrical voltage or current
• Operation contrary to the manufacturer’s instructions
• Unauthorized disassembly
• Repairs or alterations performed by anyone other than Jarden Consumer Solutions or an authorized service center
• Events such as fires, floods, hurricanes, or tornadoes

Attempting to repair or adjust the appliance’s electrical or mechanical functions may void the warranty.

Warranty Limitations

The manufacturer’s warranty includes limitations concerning incidental and consequential damages, implied warranties, and other liabilities.

Some limitations may not apply in certain states, provinces, or jurisdictions.

The warranty provides specific legal rights, and additional rights may vary according to applicable local laws.

Customer Support Information

For product questions, warranty service, examination, or repair assistance, the manufacturer provides the following contact information.

United States Support

Sunbeam Products, Inc., doing business as Jarden Consumer Solutions

Boca Raton, Florida 33431

United States

Canada Support

Sunbeam Corporation (Canada) Limited, doing business as Jarden Consumer Solutions

20B Hereford Street

Brampton, Ontario L6Y 0M1

Canada

How to Obtain Warranty Service

Customers requesting warranty service should contact the appropriate customer service number.

A convenient authorized service center address will be provided. The original purchase receipt must be retained as proof of purchase.

Important: The appliance must not be mailed directly to the manufacturer’s corporate addresses or returned to its original place of purchase for warranty service.

Frequently Asked Questions

1. How do I use the Oster BVST-EK5967 Digital Electric Kettle?

The kettle must be filled with fresh water between the minimum and MAX markings, placed correctly on its power base, and connected to an electrical outlet. The digital display initially shows 212°F. The temperature can be adjusted using the control buttons. Pressing the power button starts heating, and the kettle automatically switches off when the selected temperature is reached.

2. What is the default temperature setting on the Oster BVST-EK5967?

The default temperature setting is 212°F. This value appears when the kettle is placed on its powered base. The temperature can be changed using the adjustment buttons before heating begins. When the kettle is removed and returned to the base, the display returns to 212°F.

3. Does the Oster BVST-EK5967 switch off automatically?

Yes. The kettle switches off automatically when the water reaches the selected temperature. The lid must remain securely closed for correct operation. The power button must not be held down because this can damage the automatic shut-off mechanism.

4. Why does the digital display stay on after the kettle stops heating?

After the selected water temperature has been reached, the digital display remains illuminated for approximately 10 minutes. During this period, it shows the current water temperature. The display switches off when the kettle is removed from the power base.

5. How do I clean the removable filter on the Oster BVST-EK5967?

The kettle must be switched off, unplugged, emptied, and allowed to cool completely. The lid is then opened, and the filter is gently pulled upward by its upper section. The filter should be rinsed under running tap water while being gently brushed with a soft brush. After cleaning, it must be pushed back into position until it clicks and lightly pulled to confirm that it is securely attached.

6. How do I descale the Oster Digital Electric Kettle?

The manufacturer recommends mixing 3 cups of white vinegar with 3 cups of water and allowing the solution to remain inside the kettle overnight. The solution must then be discarded, and any remaining stains wiped with a damp cloth. The kettle should be filled with clean water, boiled, and emptied. The fresh-water boiling and discarding procedure must be repeated.

7. What should I do if the Oster BVST-EK5967 boils dry?

The kettle’s boil-dry protection device automatically switches it off if insufficient water is present. The appliance must be allowed to cool for approximately 30 minutes before reuse. It must then be refilled with at least the minimum required amount of water before another heating cycle begins.

8. Can the Oster BVST-EK5967 be washed in a dishwasher?

No. The manufacturer specifies that none of the kettle’s components are dishwasher safe. The kettle interior and lid can be washed with mild detergent and water, the exterior can be wiped using a soft, damp cloth, and the removable filter must be washed by hand. The kettle and power base must never be immersed in water or another liquid.