Philips Norelco Tripleheader Shaver S331X

Tripleheader Shaver S331X

Philips Norelco S331X shaver instructions for charging, wet and dry face and head shaving, trimmer cleaning, SH30 replacement heads, and troubleshooting.
Supporting Models: S331X, S321X, S313X, S311X, S314X, S324X, S334X
English, Spanish

Read The User Manual (PDF) Online

View the original document directly below. For safety-critical procedures, follow the manufacturer’s instructions for your exact model.

Philips Norelco Tripleheader Shaver S331X

The Philips Norelco Tripleheader Shaver is a rechargeable rotary electric shaver designed for facial and scalp shaving. The product family includes S331X, S321X, S313X, S311X, S314X, S324X, and S334X models.

The shaver uses three rotary shaving heads to cut hair growing in different directions. It supports wet and dry shaving, including use with shaving foam or gel and cordless shaving in the shower. A built-in pop-up trimmer allows users to groom sideburns and moustaches.

The rechargeable lithium-ion battery provides up to 60 minutes of cordless operation after approximately one hour of charging. A five-minute quick charge provides enough power for a five-minute shave.

Models in the S31xx family have a single charging indicator, while S32xx and S33xx models use a three-level battery indicator. The S33xx models also support charging with the supplied charging stand.

The shaver is suitable for scalp shaving when the hair is shorter than 1.5 mm. It includes a removable shaving unit, protective cap, and replaceable shaving heads.

Product Overview and Features

The Philips Norelco Tripleheader Shaver uses three rotary shaving heads designed to remain in contact with the skin during shaving.

Its waterproof construction allows cordless operation on wet or dry skin and permits cleaning under running water.

Main Features

FeatureDescription
Tripleheader shaving systemThree rotary shaving heads for facial and scalp hair removal.
Wet and dry shavingSuitable for dry shaving or shaving with water, foam, or gel.
Waterproof constructionSupports shower use and cleaning under running water.
Scalp shavingSuitable for scalp hair shorter than 1.5 mm.
Pop-up trimmerTrims sideburns and moustaches.
Rechargeable batteryBuilt-in lithium-ion battery.
Cordless operationOperates only when disconnected from charging power.
USB chargingCharges using a certified 5 V USB power source.
Quick chargeFive minutes of charging provides enough energy for a five-minute shave.
Battery indicatorsOne-level or three-level charging indicators depending on the model.
Charging standIncluded with S33xx models.
Protective capProtects the shaving heads during storage and travel.
Travel pouchIncluded with selected configurations.
Replaceable shaving headsCompatible with original Philips Norelco SH30 replacement heads.

Parts and Components

The shaver includes a rechargeable handle, rotary shaving unit, power control, pop-up trimmer, charging components, and protective accessories.

Main Shaver Components

Part No.ComponentFunction
1Protective capProtects the shaving heads during storage and transportation.
2Shaving unitContains the rotary shaving heads.
3Shaving unit release buttonOpens the shaving unit for cleaning and replacement.
4On/Off buttonSwitches the shaver on or off.
5One-level charging lightDisplays charging and battery status on S31xx models.
6Three-level charging lightsDisplay charging and battery status on S32xx and S33xx models.
7Pop-up trimmerTrims sideburns and moustaches.
8Trimmer release slideOpens the pop-up trimmer.
9USB cableConnects the shaver to a compatible USB power source.
10Small plugConnects the USB cable to the shaver or charging stand.
11Charging standHolds and charges S33xx models.
12Travel pouchStores the shaver on selected models.

Internal Shaving Unit Components

ComponentFunction
Rotary shaving headsCut facial and scalp hair during shaving.
CuttersCutting elements inside the shaving heads.
GuardsPrecision-slotted components surrounding the cutters.
Retaining frameHolds the shaving heads securely inside the shaving unit.
Retaining frame lockLocks or releases the retaining frame.
Hair chamberCollects hair removed during shaving.
Shaving unit hingeConnects the shaving unit to the shaver handle.

The shaving unit can be opened for routine cleaning and removed when replacing the shaving heads.

Model Differences and Accessories

The Philips Norelco Tripleheader Shaver manual covers S31xx, S32xx, and S33xx configurations.

The main operating functions are similar, but the charging indicators and some supplied accessories differ.

Model Family Comparison

Model FamilyBattery IndicatorCharging Stand
S31xxSingle charging lightNot specified
S32xxThree-level charging lightsNot specified
S33xxThree-level charging lightsSupported

Travel Pouch Compatibility

The travel pouch is supplied with the following specific configurations:

  • S3243
  • S3341
  • S3112
  • S3211
  • S3212
  • S3311

The protective cap is used to protect the shaving heads during storage and transportation.

Technical Specifications

SpecificationDetails
BrandPhilips Norelco
ProductTripleheader Shaver
Model familiesS31xx, S32xx, S33xx
Models on manual coverS331X, S321X, S313X, S311X, S314X, S324X, S334X
Product typeRechargeable rotary electric shaver
Shaving systemTriple rotary shaving heads
Intended useFacial and scalp shaving
Maximum scalp hair lengthLess than 1.5 mm
Shaving operationWet and dry
Shower useSupported
WaterproofYes
Operating methodCordless only
Pop-up trimmerIncluded
Battery typeRechargeable lithium-ion
Full charging timeApproximately 1 hour
Quick charging timeApproximately 5 minutes
Quick charge capacityApproximately 5 minutes of shaving
Maximum cordless operating timeUp to 60 minutes
Battery indicator, S31xx1 charging light
Battery indicator, S32xx and S33xx3 charging lights
USB charging voltage5 V
Minimum USB charging current1 A
Suitable USB power source examplePhilips HQ87
Charging power source protection for moist environmentsIPX4 splash-proof
Charging standS33xx models
Charging, operating, and storage temperature10°C–35°C (50°F–95°F)
Recommended shaving head replacementEvery 2 years
Replacement shaving headsPhilips Norelco SH30
Pop-up trimmer lubricationEvery 6 months
Warranty2 years
Money-back guarantee45 days, subject to conditions

Important Safety Instructions

The Philips Norelco Tripleheader Shaver contains electrical components and a rechargeable lithium-ion battery.

Follow the safety instructions to reduce the risk of electric shock, burns, fire, and personal injury.

Electrical Safety

  • Read all operating instructions before using the shaver.
  • Use only a certified USB power source rated at 5 V and at least 1 A.
  • When charging in a moist environment, use an IPX4 splash-proof USB power source.
  • Keep the USB cable, power source, and charging stand dry.
  • Do not place charging equipment where it could fall into a bathtub or sink.
  • Do not immerse the connected charging equipment in water or another liquid.
  • If a connected product falls into water, disconnect it from the electrical outlet immediately before attempting to retrieve it.
  • Never operate the shaver while connected to charging power.
  • Disconnect the USB power source before cleaning.
  • Do not use a damaged USB cable or USB power source.
  • Keep the charging equipment away from heated surfaces.
  • Do not use an extension cord.
  • Connect the USB power source directly to an electrical outlet.
  • Do not use the power source near an electrical outlet containing an electric air freshener.
  • Do not use the shaver outdoors or in locations where aerosol sprays are being used or oxygen is being administered.

Warning: The shaver is waterproof, but it must be disconnected from electrical power before use.

General Safety Precautions

  • Use the product only for its intended household grooming purpose.
  • Use the shaver only for facial hair and scalp hair.
  • Scalp hair must be shorter than 1.5 mm before shaving.
  • Use the product only on skin that is undamaged and not affected by skin growths, skin disease, or severe irritation.
  • Check the cutters and guards before every use.
  • Do not use damaged shaving heads, as they may cause injury.
  • Use only original Philips accessories and consumables.
  • Do not insert objects into the product’s openings.
  • Do not use the shaver if it has been dropped, damaged, or is not operating correctly.
  • Do not press excessively against the skin while shaving.

Battery Safety

The shaver contains a rechargeable lithium-ion battery.

  • Do not open, puncture, modify, or dismantle the battery.
  • Do not expose the battery to fire.
  • Do not heat the battery above 100°C (212°F).
  • Do not place the product or battery in a microwave oven or on an induction cooker.
  • Do not short-circuit, overcharge, or reverse-charge the battery.
  • Keep the product away from direct sunlight and excessive heat.
  • Charge, use, and store the shaver between 10°C and 35°C (50°F and 95°F).
  • Stop using and charging the product if it becomes unusually hot, produces an abnormal smell, changes color, or takes longer than normal to charge.
  • Contact Philips if abnormal battery behavior occurs.

If the battery becomes damaged or leaks, avoid contact with the skin or eyes. If contact occurs, rinse thoroughly with water and seek medical care.

Safety for Children

The shaver is not intended for use by children or people with reduced physical, sensory, or mental capabilities unless they have received appropriate supervision or instructions from a responsible person.

Children must be supervised to prevent them from playing with the product.

Before First Use

Before the first shaving session, inspect the shaver and charge its battery.

Initial Setup Instructions

  1. Remove the shaver and accessories from the packaging.
  2. Check the shaving heads, cutters, and guards for damage.
  3. Make sure the shaving unit is correctly attached.
  4. Switch off the shaver.
  5. Connect the USB charging cable to a compatible power source.
  6. Charge the battery before regular use.
  7. Disconnect the charging equipment before switching on the shaver.

A complete charge takes approximately one hour.

Charging After Temperature or Humidity Changes

If the product has experienced a significant change in temperature, pressure, or humidity, allow it to adjust to the new environment for 30 minutes before use.

First-Time Shaving

The skin and beard may need time to adapt to a rotary shaving system.

Philips recommends using the shaver exclusively for three weeks to become familiar with the shaving technique.

Charging the Philips Norelco Tripleheader Shaver

The shaver uses USB charging.

A compatible USB power source is required but is not included.

The power source must provide 5 V and at least 1 A.

How to Charge the Shaver with a USB Power Source

  1. Make sure the shaver is switched off.
  2. Insert the small plug of the USB cable into the socket at the bottom of the shaver.
  3. Connect the USB plug to a compatible USB power source.
  4. Plug the USB power source into an electrical outlet.
  5. Check the charging light or lights on the shaver.
  6. Allow the battery to charge.
  7. After charging, disconnect the USB power source from the electrical outlet.
  8. Remove the small plug from the shaver.

Important: Do not charge the shaver inside a pouch or travel case.

Charging Time and Battery Life

Charging InformationDetails
Full charging timeApproximately 1 hour
Quick charging timeApproximately 5 minutes
Shaving time after quick chargeApproximately 5 minutes
Maximum cordless runtimeUp to 60 minutes

Five-Minute Quick Charge

A five-minute quick charge can provide enough battery power for a five-minute shave.

  1. Connect the switched-off shaver to a compatible USB power source.
  2. Charge the battery for approximately five minutes.
  3. Check the charging indicator.
  4. Disconnect the USB cable.
  5. Use the shaver normally.

The quick-charge indicator behavior differs between S31xx and S32xx/S33xx models.

Charging with the Charging Stand

Applicable to S33xx models only.

The charging stand holds the shaver upright while charging.

Charging Stand Instructions

  1. Make sure the shaver is switched off.
  2. Connect the small plug of the USB cable to the charging stand.
  3. Connect the USB plug to a compatible USB power source.
  4. Plug the power source into an electrical outlet.
  5. Place the shaver upright on the charging stand.
  6. Make sure the charging contacts in the stand fit into the corresponding recess at the bottom of the shaver.
  7. Check the charging indicator lights.
  8. Allow the battery to charge.
  9. After charging, lift the shaver straight upward from the stand.
  10. Disconnect the charging equipment.

Important: Do not tilt the shaver while removing it from the charging stand.

Keep the charging stand and electrical connections dry.

Battery Indicators for S31xx Models

S31xx models use a single charging indicator light.

The light changes color or flashing behavior according to battery status.

S31xx Charging Indicator Guide

IndicatorMeaning
Flashing orangeBattery has approximately 5 minutes or less of shaving time remaining.
Flashing whiteBattery is charging.
Solid whiteBattery is fully charged.
Fast flashing white during quick chargeQuick charging is in progress.
Slow flashing white after approximately 5 minutesEnough power is available for a five-minute shave.
Light switches off after approximately 30 minutes of full chargingAutomatic energy-saving behavior.

Low Battery Warning

When the battery has approximately five minutes or less of shaving time remaining, the charging light flashes orange.

The orange light continues flashing briefly after the shaver is switched off.

Recharge the battery when this indication appears.

Fully Charged Indicator

When the battery is fully charged, the charging light remains continuously white.

The indicator switches off automatically after approximately 30 minutes to conserve energy.

Battery Indicators for S32xx and S33xx Models

S32xx and S33xx models use three charging lights.

The lights illuminate in sequence during charging.

S32xx and S33xx Charging Indicator Guide

IndicatorMeaning
Bottom charging light flashes orangeBattery has approximately 5 minutes or less of shaving time remaining.
Bottom light flashes, then becomes solidInitial charging progress.
Second light flashes, then becomes solidBattery charge is increasing.
Lights illuminate sequentiallyCharging is in progress.
All three lights remain solid whiteBattery is fully charged.
Bottom light flashes white after approximately 5 minutes of quick chargingEnough power is available for a five-minute shave.
Charging lights switch off after approximately 30 minutesNormal energy-saving behavior.

Low Battery Warning

When approximately five minutes or less of shaving time remain, the bottom charging light flashes orange.

The light continues flashing for a few seconds after the shaver is switched off.

Fully Charged Indicator

When the battery reaches full charge, all three charging lights remain solid white.

The lights switch off automatically after approximately 30 minutes.

How to Use the Philips Norelco Shaver

The Philips Norelco Tripleheader Shaver is designed for wet and dry facial shaving.

During use, move the shaving heads over the skin using circular movements.

How to Turn the Shaver On and Off

  1. Make sure the shaver is disconnected from charging equipment.
  2. Press the On/Off button once to switch it on.
  3. Press the same button again to switch it off.

Basic Shaving Instructions

  1. Check that the shaving heads are clean and undamaged.
  2. Switch on the shaver.
  3. Place the three rotary shaving heads against the skin.
  4. Move the shaver using small circular movements.
  5. Keep each shaving head fully in contact with the skin.
  6. Apply gentle pressure while shaving.
  7. Use the narrow sides of the shaving unit for difficult-to-reach areas.
  8. Continue shaving until the required areas are complete.
  9. Switch off the shaver.
  10. Clean the shaving unit after use.
  11. Fit the protective cap over the shaving heads.

Important: Do not press too hard against the skin. Excessive pressure may cause irritation.

Shaving the Jawline and Under the Nose

The narrow sides of the shaving unit can be used for areas that require more precise movement.

These include:

  • Along the jawline.
  • Under the nose.

Keep the shaving heads in contact with the skin and use gentle circular movements.

Dry Shaving Instructions

The shaver can be used without water, shaving foam, or gel.

How to Dry Shave

  1. Make sure the shaver is disconnected from electrical power.
  2. Check that the shaving heads are clean.
  3. Press On/Off to start the shaver.
  4. Place the shaving heads against the face.
  5. Move the shaver in circular movements.
  6. Keep all shaving heads in contact with the skin.
  7. Avoid excessive pressure.
  8. Switch off the shaver after shaving.
  9. Clean the shaving unit.

Shaving After Several Days of Beard Growth

For improved shaving comfort, Philips recommends trimming the beard before shaving if it has not been shaved for three days or longer.

Use gentle circular movements after trimming.

Wet Shaving Instructions

The waterproof shaver supports wet shaving with water, shaving foam, or shaving gel.

How to Wet Shave

  1. Disconnect the shaver from charging equipment.
  2. Apply water to the skin.
  3. Apply shaving foam or gel.
  4. Rinse the shaving heads under warm running water.
  5. Switch on the shaver.
  6. Move the shaving heads gently across the skin using circular movements.
  7. Keep each shaving head fully in contact with the skin.
  8. Rinse the shaving unit regularly during shaving.
  9. Continue until the required areas have been shaved.
  10. Switch off the shaver.
  11. Rinse away all remaining shaving foam or gel.
  12. Clean the shaving unit.

Rinsing the shaving unit during wet shaving helps it continue moving smoothly over the skin.

Using the Shaver in the Shower

The shaver is waterproof and suitable for cordless use in the bath or shower.

Warning: Never operate the shaver in the shower while it is connected to electrical power.

Head Shaving Instructions

The Philips Norelco Tripleheader Shaver can be used for scalp shaving.

Warning: Scalp hair must be shorter than 1.5 mm before using the shaver.

How to Shave the Head

  1. Make sure the scalp hair is shorter than 1.5 mm.
  2. Check that the shaving heads are clean and undamaged.
  3. Switch on the shaver.
  4. Place the shaving heads against the scalp.
  5. Move the shaver using circular movements.
  6. Shave in the direction of hair growth.
  7. Stretch the skin with the free hand so the shaving heads can lift and cut the hair.
  8. Keep each shaving head fully in contact with the scalp.
  9. Apply gentle pressure.
  10. Regularly remove accumulated hair from the hair chamber.
  11. Switch off the shaver after shaving.
  12. Clean the shaving unit.
  13. Fit the protective cap.

Direction of Head Shaving

Philips recommends shaving in the direction of hair growth.

Shaving against the direction of hair growth may cause skin irritation.

Wet Head Shaving

The shaver may also be used for wet scalp shaving.

  1. Apply water and shaving foam or gel to the scalp.
  2. Rinse the shaving heads with warm water.
  3. Shave using circular movements in the direction of hair growth.
  4. Rinse the shaving unit regularly during shaving.
  5. Switch off and clean the shaver afterward.

21-Day Shaving Adaptation Period

The skin and beard may need time to adjust when changing to a new shaving system.

During the first few shaving sessions:

  • The shave may not initially feel as close as expected.
  • Mild facial irritation may occur.
  • The skin may require time to become accustomed to rotary shaving.

Philips recommends using the new shaver exclusively for three weeks.

Alternating between different shaving methods during this period may make adjustment more difficult.

If the shaving experience remains unsatisfactory after 21 days, the product may qualify for Philips Norelco’s 45-day money-back guarantee, subject to the return conditions.

Using the Pop-Up Trimmer

The built-in pop-up trimmer can be used to groom:

  • Sideburns.
  • Moustache.
  • Facial hair edges.

Pop-Up Trimmer Instructions

  1. Push the trimmer release slide downward.
  2. Open the pop-up trimmer.
  3. Press the On/Off button to start the shaver.
  4. Hold the trimmer perpendicular to the skin.
  5. Move the trimmer downward using gentle pressure.
  6. Continue trimming the required area.
  7. Switch off the shaver.
  8. Clean the trimmer after use.
  9. Close the trimmer until it clicks into place.

Trimmer Maintenance

Clean the pop-up trimmer after every use to prevent clogging or damage.

For optimal performance, Philips recommends lubricating the trimmer teeth with one drop of mineral oil every six months.

Cleaning Instructions

Regular cleaning helps maintain shaving performance and prevents hair or shaving product residue from accumulating inside the shaving unit.

Clean the shaver after every use.

Important: Never clean, remove, or replace the shaving unit while the shaver is switched on, except for the specified running-water rinsing procedure.

Do not touch the shaving heads with hard objects, as this may damage the precision-slotted components.

Do not use abrasive cleaning products, scouring pads, gasoline, or acetone.

How to Clean the Shaver Under Running Water

The shaving unit can be rinsed with cold or lukewarm water.

Cleaning Procedure

  1. Make sure the shaver is disconnected from charging equipment.
  2. Press On/Off to switch on the shaver.
  3. Rinse the shaving unit under cold or lukewarm running water.
  4. Press On/Off again to switch off the shaver.
  5. Press the shaving unit release button.
  6. Open the shaving unit.
  7. Rinse the shaving unit and hair chamber with lukewarm water.
  8. Rinse the outside of the shaving unit.
  9. Carefully shake off excess water.
  10. Allow the shaver to air-dry.
  11. Close the shaving unit.

Caution: Check the water temperature before rinsing to prevent burns.

Water Dripping from the Base

Water may drip from the bottom of the shaver during rinsing.

This is normal. The internal electrical components are housed in a waterproof compartment.

Drying the Shaving Unit

Never dry the shaving unit with a towel or tissue.

Doing so may damage the shaving heads.

Allow the shaving components to air-dry.

Cleaning the Pop-Up Trimmer

Clean the pop-up trimmer after every use to prevent clogging and maintain performance.

Cleaning Instructions

  1. Switch off the shaver.
  2. Push the trimmer release slide downward.
  3. Open the trimmer.
  4. Switch on the shaver.
  5. Rinse the trimmer under warm running water.
  6. Switch off the shaver.
  7. Carefully shake off excess water.
  8. Allow the trimmer to air-dry.
  9. Close the trimmer until it clicks into place.

Caution: Do not dry the trimmer teeth using a towel or tissue, as this may damage them.

Lubricating the Trimmer

Philips recommends applying one drop of mineral oil to the pop-up trimmer teeth every six months.

The oil is not included.

Maintenance Instructions

Regular maintenance includes cleaning the shaving unit, inspecting the cutters and guards, lubricating the pop-up trimmer, and replacing worn shaving heads.

Maintenance Schedule

Maintenance TaskFrequencyInstructions
Inspect shaving headsBefore every useCheck cutters and guards for damage.
Clean shaving unitAfter every shaveRinse under cold or lukewarm running water.
Clean hair chamberAfter every shaveRemove accumulated hair and residue.
Clean pop-up trimmerAfter every useRinse under warm water and allow to dry.
Lubricate pop-up trimmerEvery 6 monthsApply one drop of mineral oil to the teeth.
Replace shaving headsEvery 2 yearsInstall original Philips Norelco SH30 heads.
Replace damaged shaving headsImmediatelyStop using damaged cutters or guards.
Check charging equipmentBefore chargingInspect the USB cable and power source for damage.
Dry before storageAfter cleaningAllow the shaver to dry completely.

Replacing the Shaving Heads

Philips recommends replacing the shaving heads every two years for maximum shaving performance.

Damaged shaving heads should be replaced immediately.

Use original Philips Norelco SH30 replacement shaving heads.

How to Replace the Shaving Heads

  1. Switch off the shaver.
  2. Press the shaving unit release button.
  3. Open the shaving unit.
  4. Pull the shaving unit away from the shaver.
  5. Turn the retaining frame lock counterclockwise.
  6. Remove the retaining frame and place it in a safe location.
  7. Remove the old shaving heads.
  8. Discard the used shaving heads to avoid mixing them with the new heads.
  9. Insert the new SH30 shaving heads into the shaving unit.
  10. Check that the projections on the shaving heads fit correctly into the corresponding hooks of the shaving head holder.
  11. Reinstall the retaining frame.
  12. Turn the retaining frame lock clockwise to secure it.
  13. Insert the shaving unit hinge into the slot at the top of the shaver.
  14. Close the shaving unit.

Shaving Head Design Variations

The supplied shaving heads may have notches or projections.

Both shaving head systems perform the same function.

Make sure the replacement heads are properly positioned before locking the retaining frame.

If the Shaving Unit Does Not Close Properly

If the shaving unit does not close smoothly:

  1. Check that the shaving heads are correctly installed.
  2. Check that the retaining frame is positioned correctly.
  3. Make sure the retaining frame lock is secured.
  4. Reattach and close the shaving unit.

Do not force the shaving unit closed.

The shaver has no other user-serviceable parts.

For repairs or other assistance, contact Philips support.

Troubleshooting Guide

The Philips Norelco Tripleheader Shaver communicates battery conditions through its charging lights.

The operating instructions also identify several common situations that can affect shaving, charging, or maintenance.

Common Problems and Solutions

Problem or ConditionPossible CauseRecommended Solution
Shaver does not operate while connected to powerThe shaver is designed for cordless use only.Disconnect the charging cable before use.
S31xx charging light flashes orangeApproximately 5 minutes or less of shaving time remain.Recharge the shaver.
S32xx or S33xx bottom charging light flashes orangeBattery is nearly empty.Recharge the shaver.
Charging lights switch off after full chargingNormal energy-saving behavior.No action is required.
Shaver does not provide enough power for a shaveBattery needs charging.Use the five-minute quick charge or fully charge the battery.
Shaving performance is not as close as expected during initial useSkin and beard may still be adapting.Follow the 21-day adaptation instructions.
Skin irritation occurs during shavingExcessive pressure or shaving against hair growth may contribute to irritation.Apply gentle pressure and follow the appropriate shaving technique.
Shaver does not glide smoothly during wet shavingFoam or gel may be accumulating around the shaving heads.Rinse the shaving unit regularly during shaving.
Water drips from the bottom during cleaningWater passes through the rinsed shaving unit.Allow the shaver to drain and air-dry.
Shaving unit does not close smoothly after head replacementShaving heads may be incorrectly installed or the retaining frame may not be locked.Check the shaving head positioning and retaining frame.
Shaving heads are damagedCutters or guards are damaged.Stop using the shaver and install replacement heads.
Shaver becomes abnormally hot, changes color, or produces an unusual smellAbnormal product or battery condition.Stop using and charging the shaver and contact Philips.
Charging takes longer than usualPossible abnormal charging condition.Stop charging and contact Philips support.

Why Is the Philips Norelco Shaver Flashing Orange?

A flashing orange charging light indicates a low battery.

On S31xx models, the single charging light flashes orange.

On S32xx and S33xx models, the bottom charging light flashes orange.

The warning appears when approximately five minutes or less of shaving time remain.

Recharge the shaver.

Why Does the Shaver Not Work While Charging?

The shaver is designed for cordless operation only.

It cannot operate while connected to an electrical outlet.

Disconnect the USB charging cable before switching on the shaver.

Why Do the Charging Lights Turn Off?

When the battery is fully charged, the charging indicator remains white.

The lights automatically switch off after approximately 30 minutes to conserve energy.

Why Is the Shaver Not Shaving Closely?

If the shaver is being used for the first time, the skin and beard may need time to adjust.

Philips recommends using the shaver exclusively for three weeks.

For normal operation, use circular movements, keep the shaving heads in contact with the skin, and avoid excessive pressure.

Replace the shaving heads after two years or sooner if they become damaged.

Why Does the Shaver Cause Irritation?

Excessive pressure during shaving may irritate the skin.

When shaving the scalp, shaving against the direction of hair growth may also cause irritation.

Use gentle pressure and follow the recommended shaving movements.

Why Is the Shaving Unit Difficult to Close?

The shaving heads may not be positioned correctly, or the retaining frame may not be locked.

Check that the shaving heads fit into the holder and that the retaining frame is securely installed before closing the shaving unit.

What Should Be Done If the Shaver Overheats?

If the shaver becomes unusually hot, produces an abnormal smell, changes color, or takes longer than normal to charge:

  1. Stop using the shaver.
  2. Disconnect the charging equipment.
  3. Do not open or attempt to repair the battery.
  4. Contact Philips support.

Storage Instructions

The shaver should be cleaned and dried before storage.

How to Store the Shaver

  1. Switch off the shaver.
  2. Disconnect the USB power source.
  3. Remove the charging plug from the shaver.
  4. Clean the shaving unit and pop-up trimmer.
  5. Allow all components to dry completely.
  6. Attach the protective cap.
  7. Store the shaver in a safe, dry location.
  8. Keep the charging cable and accessories protected from damage.

Storage Precautions

  • Do not wrap the charging cord around the shaver.
  • Do not store the shaver where it may be crushed or struck.
  • Keep the charging cable away from sharp edges and potential damage.
  • Do not store the connected shaver near a bathtub or sink.
  • Allow the product to dry completely before putting it away.

Storage in the Travel Pouch

Applicable to S3243, S3341, S3112, S3211, S3212, and S3311.

Place the shaver in its supplied travel pouch.

Important: Make sure the shaver is completely dry before storing it in the pouch.

Replacement Parts and Accessories

Philips specifies original SH30 replacement shaving heads for the Tripleheader Shaver.

Replacement Shaving Heads

AccessoryModel NumberPurpose
Philips Norelco Replacement Shaving HeadsSH30Replaces the rotary shaving heads.

Replacement Schedule

Replace the shaving heads every two years.

Replace damaged cutters or guards immediately.

Original Philips Norelco replacement accessories are available through:

https://www.philips.com/store

Battery Disposal and Recycling

The Philips Norelco Tripleheader Shaver contains a rechargeable lithium-ion battery.

The battery must be disposed of or recycled properly.

Do not discard the battery with ordinary household waste.

Battery Recycling Instructions

  1. Contact local waste management authorities for approved battery disposal options.
  2. Use an authorized battery recycling location.
  3. Follow the applicable local recycling requirements.

Battery Handling Precautions

  • Do not puncture or dismantle the battery.
  • Do not expose the battery to fire.
  • Do not allow the terminals of a removed battery to contact metal objects.
  • Do not wrap removed batteries in aluminum foil.
  • Cover battery terminals with tape or place the battery in a plastic bag before disposal.
  • Keep hands and battery components dry.

Recycling Information

ServiceContact
Battery Recyclinghttps://www.call2recycle.org
Battery Recycling Telephone1-800-822-8837
Philips Recyclinghttps://www.recycle.philips.com
Philips Product Supporthttps://www.philips.com/support

Warranty Information

Full Two-Year Warranty

Philips North America LLC provides a two-year warranty beginning on the date of purchase.

The warranty covers defects in materials and workmanship.

Philips agrees to repair or replace a qualifying defective product without charge during the warranty period.

Warranty Exclusions

The warranty does not cover:

  • Shaving heads, including cutters and guards, because they are subject to normal wear.
  • Damage caused by accidents.
  • Damage resulting from misuse or abuse.
  • Damage caused by insufficient care.
  • Damage caused by attachments not supplied with the product.
  • Lost parts.
  • Damage resulting from use with an incorrect voltage.

The warranty also limits liability for certain special, incidental, or consequential damages where permitted by law.

Warranty Service

For warranty assistance, visit:

https://www.philips.com/support

Philips recommends using prepaid insured shipping when returning a product for warranty service.

Damage occurring during shipment is not covered by the warranty.

The warranty provides specific legal rights, and additional rights may vary by state.

45-Day Money-Back Guarantee

Philips Norelco provides a 45-day money-back guarantee for qualifying purchases.

If the product does not meet the user’s expectations, it may be returned according to the stated guarantee conditions.

Money-Back Guarantee Requirements

  • Return the product with the original sales receipt.
  • The receipt must show the purchase price and purchase date.
  • Ship the product using prepaid, insured mail.
  • Make sure the package is postmarked within 45 days of purchase.
  • Philips may verify the original purchase price.
  • Refunds cannot exceed the suggested retail price.

Philips does not accept responsibility for lost return shipments.

How to Request a Refund

  1. Visit Philips Money-Back Guarantee.
  2. Follow the three-step return process.
  3. Prepare the product and original sales receipt.
  4. Ship the return according to the stated instructions.
  5. Make sure the shipment is postmarked within 45 days of purchase.

Refund checks are generally delivered within six to eight weeks after Philips receives the returned product.

Customer Support Information

Philips provides assistance with charging, product operation, replacement shaving heads, warranty service, and other product concerns.

Official Support Contacts

Support ServiceContact
Philips Product Supporthttps://www.philips.com/support
Customer Support Telephone1-800-243-3050
Product Registrationhttps://www.philips.com/register
Replacement Parts and Accessorieshttps://www.philips.com/store
Money-Back Guaranteehttps://www.PhilipsMoneyBack.com
Battery Recyclinghttps://www.call2recycle.org
Battery Recycling Telephone1-800-822-8837
Philips Recyclinghttps://www.recycle.philips.com

Manufacturer Information

Philips Personal Health

A division of Philips North America LLC

P.O. Box 10313
Stamford, CT 06904
United States

Frequently Asked Questions

How do I use the Philips Norelco Tripleheader Shaver?

Disconnect the charging cable and switch on the shaver. Place the three rotary shaving heads against the skin and move them in circular movements. Apply gentle pressure, keep the heads in contact with the skin, and switch off and clean the shaver after use.

How long does the Philips Norelco S331X take to charge?

A full charge takes approximately one hour and provides up to 60 minutes of cordless operation. A five-minute quick charge provides enough battery power for approximately five minutes of shaving.

What does the orange charging light mean on a Philips Norelco shaver?

A flashing orange charging light indicates that approximately five minutes or less of shaving time remain. S31xx models use a single charging light, while S32xx and S33xx models use three-level charging indicators with the bottom light flashing orange.

Can the Philips Norelco Tripleheader Shaver be used in the shower?

Yes. The shaver is waterproof and suitable for wet and dry shaving, including shower use. It must be disconnected from the USB charging cable before use.

Can the Philips Norelco Tripleheader Shaver be used for head shaving?

Yes. The shaver can be used for scalp shaving when the hair is shorter than 1.5 mm. Use circular movements in the direction of hair growth, keep the shaving heads in contact with the scalp, and apply gentle pressure.

How do I clean the Philips Norelco Tripleheader Shaver?

Switch on the cordless shaver and rinse the shaving unit under cold or lukewarm water. Switch it off, open the shaving unit, rinse the hair chamber and shaving components, and allow them to air-dry. Never dry the shaving heads with a towel or tissue.

Which replacement shaving heads fit the Philips Norelco S31xx, S32xx, and S33xx shavers?

The specified replacement shaving heads are Philips Norelco SH30. Philips recommends replacing the shaving heads every two years or immediately if they become damaged.

How do I use the charging stand on Philips Norelco S33xx models?

Connect the USB cable to the charging stand and a compatible power source. Place the switched-off shaver upright on the stand, aligning the charging contacts with the recess at the bottom of the shaver. After charging, lift the shaver straight upward without tilting it.

Found something that needs correcting?

If a model number, instruction, specification, or document link looks incorrect, please send us the page URL and relevant details.