Philips Norelco Tripleheader Shaver Series 6000
The Philips Norelco Series 6000 is a rechargeable rotary electric shaver designed for wet and dry facial shaving. It features three rotary shaving heads, a three-level battery indicator, travel lock, cleaning reminder, and support for click-on grooming attachments.
The shaver can be used on dry skin or with shaving foam or gel. Its waterproof design also allows cordless shaving in the bath or shower and cleaning under running water. For electrical safety, the shaver operates only when disconnected from its power cord.
The rechargeable battery provides up to 60 minutes of cordless operation after approximately one hour of charging. A five-minute quick charge supplies enough energy for one complete shave.
The Series 6000 also supports a click-on beard styler attachment with an adjustable comb. The comb provides trimming lengths from 1 mm to 5 mm, while removing the comb allows beard outlining at approximately 0.5 mm.
Product Overview and Features
The Philips Norelco Tripleheader Shaver Series 6000 uses three rotary shaving heads to remove facial hair growing in different directions. The shaving heads are designed to remain in contact with the skin while the shaver moves in circular motions.
The shaver includes an On/Off button, charging indicators, a cleaning reminder, and a travel lock to prevent accidental activation.
Main Features
| Feature | Description |
| Tripleheader rotary shaving system | Three rotary shaving heads for facial hair removal. |
| Wet and dry shaving | Supports dry shaving or shaving with water, foam, or gel. |
| Waterproof design | Suitable for cordless use in the bath or shower and cleaning under running water. |
| Rechargeable battery | Provides up to 60 minutes of cordless operation. |
| Quick charge | Approximately 5 minutes of charging provides enough power for one complete shave. |
| Three-level battery indicator | Displays charging progress and remaining battery charge. |
| Cleaning reminder | Flashes after switching off to remind users to clean the shaver. |
| Travel lock | Prevents accidental operation during transportation. |
| Unplug-for-use reminder | Indicates that the shaver must be disconnected from electrical power before operation. |
| Click-on beard styler | Supports beard trimming and shaping. |
| Adjustable beard styler comb | Provides trimming lengths from 1 mm to 5 mm. |
| Beard styling without comb | Allows closer trimming to approximately 0.5 mm. |
| Removable shaving head holder | Allows access to the shaving heads for cleaning and replacement. |
| Replaceable shaving heads | Uses Philips Norelco SH71 replacement shaving heads. |
| Travel pouch | Provides storage for the shaver. |
Parts and Components
The Philips Norelco Series 6000 includes a rechargeable handle, removable shaving unit, power cord, and grooming accessories.
Main Shaver Components
| Part No. | Component | Function |
| 1 | Shaving unit | Contains the three rotary shaving heads. |
| 2 | Shaving unit release button | Opens the shaving unit for cleaning and replacement. |
| 3 | On/Off button | Switches the shaver on or off and activates the travel lock. |
| 4 | Handle | Houses the motor, rechargeable battery, and electronic controls. |
| 5 | Socket for small plug | Connects the charging power cord. |
| 6 | Power plug | Connects the shaver to an electrical outlet for charging. |
| 7 | Small plug | Connects the power cord to the shaver. |
| 8 | Pouch | Stores and protects the shaver during travel. |
| 9 | Cleaning brush | Removes hair and debris from grooming components. |
| 10 | Length settings | Adjust the beard styler trimming length. |
| 11 | Click-on beard styler attachment | Trims and shapes facial hair. |
| 12 | Beard styler comb | Controls the remaining hair length when trimming. |
Note: Supplied accessories can vary between product configurations. The product packaging identifies the accessories included with the purchased shaver.
Internal Shaving Unit Components
The shaving unit contains removable parts used during thorough cleaning and shaving head replacement.
| Component | Function |
| Shaving head holder | Holds the three rotary shaving heads. |
| Cutters | Cutting components inside the shaving heads. |
| Guards | Surround the cutters and guide facial hair into the shaving system. |
| Retaining rings | Secure the shaving heads inside the holder. |
| Hair chamber | Collects hair removed during shaving. |
| Shaving head holder hinge | Connects the holder to the shaving unit. |
Each cutter and guard forms a matching set. Keep the pairs together when cleaning the individual shaving heads.
Technical Specifications
| Specification | Details |
| Brand | Philips Norelco |
| Product | Tripleheader Shaver |
| Series | 6000 |
| Product type | Rechargeable rotary electric shaver |
| Shaving system | Three rotary shaving heads |
| Shaving operation | Wet and dry |
| Waterproof | Yes |
| Shower use | Supported |
| Operating method | Cordless only |
| Battery type | Rechargeable lithium-ion |
| Full charging time | Approximately 1 hour |
| Quick charging time | Approximately 5 minutes |
| Quick charge capacity | Enough power for one complete shave |
| Maximum cordless runtime | Up to 60 minutes |
| Battery indicator | Three-level charging indicator |
| Charging power cord | Philips HQ8505 |
| Charging, operating, and storage temperature | 5°C–35°C (41°F–95°F) |
| Travel lock | Supported |
| Travel lock activation | Hold On/Off for 3 seconds |
| Beard styler attachment | Click-on type |
| Beard styler comb settings | 1–5 mm |
| Beard styling without comb | Approximately 0.5 mm |
| Shaving head cleaning | After every use |
| Thorough shaving head cleaning | Once per month |
| Beard styler lubrication | Regularly with sewing machine oil |
| Shaving head replacement interval | Every 12 months |
| Replacement shaving heads | Philips Norelco SH71 |
| Product warranty | 2 years |
| Money-back guarantee | 45 days, subject to conditions |
Important Safety Instructions
The Philips Norelco Series 6000 contains electrical components and a rechargeable lithium-ion battery.
Follow the safety instructions to reduce the risk of electric shock, burns, fire, and personal injury.
Electrical Safety
- Read all instructions before using the shaver.
- Use only the original Philips HQ8505 detachable power cord.
- Keep the power cord dry.
- Do not place or store connected equipment where it could fall into a bathtub or sink.
- If a connected product falls into water, disconnect it from the electrical outlet immediately before attempting to retrieve it.
- Never use the shaver while connected to its charging power supply.
- Disconnect the power cord from the electrical outlet and shaver before cleaning.
- Do not use a damaged charging cord.
- Do not operate the shaver if it has been dropped, damaged, or is not working correctly.
- Keep the power cord away from heated surfaces.
- Do not use the power cord near an electrical outlet containing an electric air freshener.
- Do not use an extension cord.
- Plug the power cord directly into an electrical outlet.
- Do not use the shaver outdoors or in areas where aerosol sprays are being used or oxygen is being administered.
Warning: The power plug contains a transformer. Do not cut the plug to replace it with another type, as this creates an electrical hazard.
Waterproof and Shower Safety
The Philips Norelco Series 6000 is waterproof and suitable for cordless use in the bath or shower.
However, it must always be disconnected from its charging cord before use.
Warning: Never use the shaver in the shower while connected to electrical power.
General Safety Precautions
- Use the product only for its intended household grooming purpose.
- Do not use attachments that Philips has not recommended.
- Check the shaving heads, cutters, and guards before every use.
- Do not use damaged cutters or guards, as they may cause injury.
- Do not insert objects into the product’s openings.
- Use original Philips replacement accessories and consumables.
- Do not use the shaver if it is damaged or operating incorrectly.
- Do not apply excessive pressure when shaving.
- Keep the shaver for personal use rather than sharing it with multiple users.
Battery Safety
The shaver contains a rechargeable lithium-ion battery.
- Do not open, puncture, modify, or dismantle the product or battery.
- Do not expose the battery to fire.
- Do not heat the battery above 100°C (212°F).
- Do not place the shaver or battery in a microwave oven or on an induction cooker.
- Do not short-circuit, overcharge, or reverse-charge the battery.
- Keep the product away from direct sunlight and high temperatures.
- Charge, use, and store the shaver between 5°C and 35°C (41°F and 95°F).
- Stop using and charging the shaver if it becomes unusually hot, produces an abnormal smell, changes color, or takes longer than normal to charge.
- Contact Philips if abnormal battery behavior occurs.
- Keep hands, the product, and batteries dry when handling batteries.
If a battery becomes damaged or leaks, avoid contact with the skin or eyes. If contact occurs, rinse immediately with water and seek medical care.
Safety for Children
The product is not intended for use by children or people with reduced physical, sensory, or mental capabilities unless they have received appropriate supervision or instructions from a responsible person.
Children must be supervised to prevent them from playing with the shaver.
Before First Use
Before the first shaving session, inspect the shaver and charge its battery.
Initial Setup Instructions
- Remove the shaver and supplied accessories from the packaging.
- Check the shaving heads, cutters, and guards for visible damage.
- Make sure the shaving unit is correctly attached.
- Check that the shaver is switched off.
- Connect the original Philips HQ8505 power cord.
- Charge the battery before regular use.
- Disconnect the power cord before switching on the shaver.
A full charge takes approximately one hour.
First-Time Shaving
The skin and beard may need time to adjust to a new rotary shaving system.
During initial use, the shave may not feel as close as expected, and mild facial irritation may occur.
Philips recommends using the shaver exclusively for three weeks to allow the skin and beard to adapt.
Charging the Philips Norelco Series 6000
The Philips Norelco Series 6000 uses the original HQ8505 detachable power cord.
The shaver must be switched off before charging.
A fully charged battery provides up to 60 minutes of cordless shaving time.
How to Charge the Shaver
- Make sure the shaver is switched off.
- Insert the small plug of the charging cord into the socket at the bottom of the shaver.
- Connect the power plug directly to an electrical outlet.
- Check the battery status indicator lights.
- Allow the battery to charge.
- After charging, remove the power plug from the outlet.
- Disconnect the small plug from the shaver.
Important: The shaver cannot operate while charging.
Charging Time and Battery Runtime
| Charging Information | Details |
| Full charging time | Approximately 1 hour |
| Quick charging time | Approximately 5 minutes |
| Quick charge capacity | One complete shave |
| Maximum cordless operating time | Up to 60 minutes |
Five-Minute Quick Charge
When the battery is nearly empty, quick charging provides enough power for one complete shave.
- Connect the switched-off shaver to the charging power cord.
- Plug the power cord into an electrical outlet.
- Allow the battery to charge for approximately five minutes.
- Check the bottom battery indicator.
- When the bottom light flashes after the quick-charge sequence, enough battery power is available for one shave.
- Disconnect the power cord before use.
Battery Status Indicator Lights
The Philips Norelco Series 6000 includes three battery indicator lights.
The number of illuminated bars indicates the remaining battery charge when the shaver is picked up.
Battery Indicator Guide
| Indicator | Meaning |
| Bottom light flashes orange | Battery is almost empty. |
| Battery lights flash sequentially | Battery is charging. |
| Bottom light flashes, then becomes solid | Initial charging progress. |
| Second light flashes, then becomes solid | Battery charge is increasing. |
| All three battery lights remain solid | Battery is fully charged. |
| Lights switch off after approximately 30 minutes | Normal energy-saving behavior after full charging. |
| Unplug-for-use symbol flashes | Power cord must be disconnected before operation. |
Low Battery Warning
When the battery is almost empty, the bottom battery status indicator flashes orange.
Recharge the shaver when this indication appears.
Charging Progress
During charging:
- The bottom battery indicator begins flashing.
- The bottom light becomes continuously illuminated.
- The second indicator begins flashing.
- The second light becomes solid.
- The remaining charging indicator follows the same sequence.
- When the battery is fully charged, all three lights remain illuminated.
Fully Charged Indicator
When charging finishes, all three battery status lights remain solid.
The lights automatically switch off after approximately 30 minutes to conserve energy.
Unplug-for-Use Symbol
The unplug-for-use symbol flashes when the shaver is connected to electrical power and an attempt is made to switch it on.
To operate the shaver:
- Disconnect the power cord from the electrical outlet.
- Remove the small charging plug from the shaver.
- Press the On/Off button.
Control Button and Display Guide
The Philips Norelco Series 6000 includes one main On/Off button and several status indicators.
On/Off Button Functions
| Button Action | Function |
| Press On/Off once | Switches the shaver on or off. |
| Hold On/Off for 3 seconds | Activates the travel lock. |
| Hold On/Off for 3 seconds while locked | Deactivates the travel lock. |
Display Symbols and Meanings
| Symbol or Indicator | Behavior | Meaning |
| Cleaning reminder | Flashes after switching off | Clean the shaver using warm water. |
| Travel lock symbol | Flashes when On/Off is pressed while locked | Travel lock is active. |
| Battery status bars | Illuminate when the shaver is picked up | Show the remaining battery charge. |
| Bottom battery light | Flashes orange | Battery is almost empty. |
| Battery lights | Flash sequentially | Battery is charging. |
| Battery lights | Remain solid | Battery is fully charged. |
| Unplug-for-use symbol | Flashes | Disconnect the power cord before using the shaver. |
How to Use the Philips Norelco Series 6000
The shaver can be used for wet or dry facial shaving.
During use, move the rotary shaving heads across the skin in small circular movements.
How to Turn the Shaver On and Off
- Make sure the charging cord is disconnected.
- Press the On/Off button once to switch on the shaver.
- Press the same button again to switch it off.
Basic Shaving Instructions
- Check that the shaving heads are clean and undamaged.
- Switch on the shaver.
- Place the shaving heads against the face.
- Move the shaver in small circular movements.
- Keep each shaving head fully in contact with the skin.
- Apply gentle pressure.
- Continue moving the shaver to capture hairs growing in different directions.
- Use the narrow sides of the shaving unit for difficult-to-reach areas.
- Switch off the shaver when finished.
- Clean the shaving unit after use.
Important: Do not press too hard against the skin. Excessive pressure may cause irritation.
Shaving the Jawline and Under the Nose
The narrow sides of the shaving unit can be used to shave areas that are difficult to reach.
These include:
- Along the jawline.
- Beneath the nose.
Use gentle circular movements while keeping the shaving heads in contact with the skin.
Dry Shaving Instructions
The Philips Norelco Series 6000 can be used without shaving foam, shaving gel, or water.
How to Dry Shave
- Make sure the shaver is disconnected from electrical power.
- Check that the shaving heads are clean.
- Press On/Off to start the shaver.
- Place the rotary shaving heads against the skin.
- Move the shaver using small circular movements.
- Keep all shaving heads in contact with the skin.
- Apply gentle pressure.
- Continue until shaving is complete.
- Switch off the shaver.
- Clean the shaving unit.
Wet Shaving Instructions
The waterproof Series 6000 supports wet shaving with water, shaving foam, or shaving gel.
How to Wet Shave
- Disconnect the charging power cord.
- Apply water to the face.
- Apply shaving foam or gel.
- Rinse the shaving heads under warm running water.
- Switch on the shaver.
- Move the shaving heads gently across the skin in circular movements.
- Keep each shaving head fully in contact with the skin.
- Apply gentle pressure.
- Rinse the shaving unit regularly during shaving.
- Continue until the required areas have been shaved.
- Switch off the shaver.
- Rinse away all remaining shaving foam or gel.
- Clean the shaving unit.
Regular rinsing during wet shaving helps the shaving heads continue moving smoothly over the skin.
Using the Shaver in the Shower
The Philips Norelco Series 6000 is waterproof and suitable for use in the bath or shower.
Warning: Never use the shaver while connected to its charging power cord.
21-Day Shaving Adaptation Period
When changing to a new rotary shaving system, the skin and beard may need time to adjust.
During the first few shaving sessions:
- The shave may not feel as close as expected.
- Mild facial irritation may occur.
- The skin may require time to become familiar with the rotary shaving system.
Philips recommends using the new shaver exclusively for three weeks.
Alternating between different shaving methods during the adjustment period may make adaptation more difficult.
If the shaving results remain unsatisfactory after 21 days, the product may qualify for the 45-day money-back guarantee, subject to the return conditions.
Using the Click-On Beard Styler Attachment
The Philips Norelco Series 6000 supports a click-on beard styler attachment.
The beard styler can be used with or without its adjustable comb.
When the comb is attached, it provides trimming lengths from 1 mm to 5 mm.
Without the comb, the beard styler can be used for closer outlining at approximately 0.5 mm.
Beard Styler Length Settings
| Setting | Remaining Hair Length |
| 1 | 1 mm |
| 2 | 2 mm |
| 3 | 3 mm |
| 4 | 4 mm |
| 5 | 5 mm |
| Without comb | Approximately 0.5 mm |
How to Attach the Beard Styler
- Make sure the shaver is switched off.
- Twist the shaving head or currently installed attachment to remove it from the handle.
- Position the beard styler attachment above the handle.
- Press the beard styler onto the handle until securely attached.
How to Install the Beard Styler Comb
- Hold the beard styler attachment.
- Align the comb with the guiding grooves on both sides of the attachment.
- Slide the comb straight into the grooves.
- Make sure it is securely positioned before trimming.
How to Select a Trimming Length
- Press the length selector on the beard styler.
- Move the selector to the left or right.
- Select the preferred trimming length between 1 mm and 5 mm.
- Check the selected length before switching on the shaver.
Trimming the Beard with the Comb
The beard styler attachment can be used to trim facial hair evenly.
It can also be used to shorten longer beard hair before shaving.
Beard Trimming Instructions
- Attach the beard styler to the shaver handle.
- Install the comb.
- Select the desired trimming length.
- Switch on the shaver.
- Place the front of the comb against the skin.
- Move the beard styler upward while applying gentle pressure.
- Keep the front of the comb fully in contact with the skin.
- Continue trimming until the required areas are complete.
- Switch off the shaver.
- Clean the attachment after use.
Using the Beard Styler Without the Comb
The beard styler can be used without its comb to outline facial hair at approximately 0.5 mm.
Suitable areas include:
- Beard edges.
- Moustache.
- Sideburns.
- Neckline.
Beard Outlining Instructions
- Make sure the shaver is switched off.
- Hold the comb at its center.
- Pull the comb straight off the beard styler attachment.
- Switch on the shaver.
- Hold the beard styler perpendicular to the skin.
- Move the attachment downward while applying gentle pressure.
- Continue shaping the required areas.
- Switch off the shaver.
- Clean the attachment after use.
Important: When removing the comb, hold it at the center. Do not pull from the sides.
Cleaning and Maintenance
Regular cleaning helps maintain shaving performance and prevents hair and shaving product residue from accumulating inside the shaving unit.
Clean the shaver and attachments after every use.
Philips also recommends thoroughly cleaning the individual shaving heads once a month or whenever shaving performance decreases.
How to Clean the Shaver Under Running Water
The waterproof shaving unit can be rinsed under warm running water.
Cleaning Instructions
- Make sure the shaver is disconnected from electrical power.
- Switch on the shaver.
- Rinse the shaving unit under warm running water.
- Switch off the shaver.
- Press the shaving unit release button.
- Open the shaving unit.
- Rinse the hair chamber under warm running water.
- Rinse the shaving head holder under warm running water.
- Carefully shake off excess water.
- Allow the shaving head holder to air-dry completely.
- Close the shaving unit.
Important: Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.
Water Dripping from the Shaver
Water may drip from the bottom of the shaver during cleaning.
This is normal when rinsing the shaving unit.
Drying the Shaving Unit
Allow the shaving components to air-dry completely.
Do not rub or dry the shaving heads with a towel or tissue.
Thorough Monthly Shaving Head Cleaning
Philips recommends thoroughly cleaning the shaving heads once a month or whenever shaving performance decreases.
Each shaving head contains a cutter and matching guard.
Important: Clean only one cutter-and-guard pair at a time. Mixing the pairs may reduce shaving performance, and it may take several weeks to restore the expected results.
How to Thoroughly Clean the Shaving Heads
- Switch off the shaver.
- Disconnect the charging power cord.
- Press the shaving unit release button.
- Pull the shaving head holder away from the shaving unit.
- Rinse the hair chamber and shaving head holder under running water.
- Turn the retaining rings counterclockwise.
- Remove the retaining rings.
- Remove one shaving head from the holder.
- Separate the cutter from its matching guard.
- Rinse the cutter and guard under running water.
- Shake off excess water.
- Return the cutter to its original guard.
- Repeat the cleaning process for the remaining shaving heads, one pair at a time.
- Place the shaving heads back into the holder.
- Reinstall the retaining rings and turn them clockwise until secured.
- Insert the shaving head holder hinge into the slot at the top of the shaving unit.
- Close the shaving unit.
Why Cutters and Guards Must Stay Together
Each cutter and guard is a matching set.
If a cutter is accidentally placed into another guard, shaving performance may decrease.
It may take several weeks before optimal performance is restored.
Always clean and reassemble one pair before moving to the next shaving head.
Cleaning the Click-On Beard Styler
Clean the beard styler attachment and comb after every use.
Cleaning Instructions
- Make sure the shaver is switched off.
- Twist the attachment to remove it from the handle.
- Remove the comb from the beard styler.
- Rinse the beard styler and comb thoroughly under warm running water.
- Carefully shake off excess water.
- Allow the attachment and comb to air-dry completely.
Caution: Never dry the cutting teeth with a towel or tissue, as this may damage them.
Beard Styler Lubrication
For optimal performance, Philips recommends regularly applying one drop of sewing machine oil to the beard styler teeth.
Maintenance Schedule
| Maintenance Task | Frequency | Instructions |
| Inspect shaving heads | Before every use | Check cutters and guards for damage. |
| Clean shaving unit | After every shave | Rinse under warm running water. |
| Clean hair chamber | After every shave | Remove accumulated hair and residue. |
| Thoroughly clean shaving heads | Once per month | Clean each cutter-and-guard pair separately. |
| Clean beard styler | After every use | Rinse and air-dry. |
| Clean beard styler comb | After every use | Remove the comb, rinse, and allow it to dry. |
| Lubricate beard styler teeth | Regularly | Apply one drop of sewing machine oil. |
| Replace shaving heads | Every 12 months | Use original Philips Norelco SH71 replacement heads. |
| Replace damaged shaving heads | Immediately | Stop using damaged cutters or guards. |
| Inspect charging equipment | Before charging | Check the power cord and plug for damage. |
| Dry before storage | After cleaning | Allow the shaver and attachments to dry completely. |
Replacing the Shaving Heads
Philips recommends replacing the shaving heads every year for maximum shaving performance.
Damaged shaving heads should be replaced immediately.
Use original Philips Norelco SH71 replacement shaving heads.
How to Replace the Shaving Heads
- Switch off the shaver.
- Press the shaving unit release button.
- Pull the shaving head holder away from the shaving unit.
- Turn the retaining rings counterclockwise.
- Remove the retaining rings and place them in a safe location.
- Remove the used shaving heads.
- Discard the old shaving heads to avoid mixing them with the replacements.
- Insert the new SH71 shaving heads into the holder.
- Place the retaining rings over the replacement shaving heads.
- Turn each retaining ring clockwise until it clicks into place.
- Insert the hinge of the shaving head holder into the slot at the top of the shaving unit.
- Close the shaving unit.
Installing the Retaining Rings Correctly
Each retaining ring has two recesses that fit into matching projections on the shaving head holder.
Turn the ring clockwise until a click confirms that it is secured.
Replacement Head Compatibility
| Accessory | Model Number | Purpose |
| Philips Norelco Replacement Shaving Heads | SH71 | Replaces the rotary shaving heads. |
Original replacement accessories are available through:
Troubleshooting Guide
The Philips Norelco Series 6000 uses battery status lights and display symbols to communicate charging conditions, cleaning reminders, and travel lock status.
Common Problems and Solutions
| Problem or Condition | Possible Cause | Recommended Solution |
| Shaver does not operate while connected to power | Cordless operation is required. | Disconnect the charging cord before use. |
| Shaver does not switch on | Travel lock may be active. | Hold On/Off for three seconds. |
| Bottom battery light flashes orange | Battery is almost empty. | Recharge the shaver. |
| Battery lights flash sequentially | Battery is charging. | Continue charging. |
| Charging lights switch off after full charging | Automatic energy-saving behavior. | No action required. |
| Cleaning reminder flashes after switching off | Shaver requires cleaning. | Rinse the shaving unit with warm water. |
| Shaving performance decreases | Shaving heads may need thorough cleaning or replacement. | Clean the individual heads and replace them when needed. |
| Shaver does not glide smoothly during wet shaving | Foam or gel may be accumulating around the shaving heads. | Rinse the shaving unit regularly. |
| Mild facial irritation occurs during initial use | Skin may still be adapting to rotary shaving. | Follow the 21-day adaptation process. |
| Shaving performance decreases after thorough cleaning | Cutters and guards may have been mixed. | Keep matching cutter-and-guard pairs together during future cleaning. |
| Beard styler does not trim evenly | Comb may not be fully in contact with the skin. | Keep the front of the comb against the skin while trimming. |
| Shaving heads are damaged | Cutters or guards are damaged. | Stop using the shaver and install replacement heads. |
| Shaver becomes unusually hot, produces an abnormal smell, or changes color | Abnormal product or battery condition. | Stop using and charging the shaver and contact Philips. |
| Charging takes longer than usual | Possible product or charging problem. | Stop charging and contact Philips support. |
Why Is the Philips Norelco Series 6000 Flashing Orange?
The bottom battery status indicator flashes orange when the battery is almost empty.
Recharge the shaver using the original HQ8505 power cord.
Why Does the Shaver Not Work While Charging?
The Philips Norelco Series 6000 is designed for cordless operation.
It cannot operate while connected to electrical power.
Disconnect the charging cord before switching on the shaver.
Why Are the Charging Lights Flashing in Sequence?
The battery indicator lights illuminate sequentially during charging.
As the battery charges, each light becomes solid before the next light begins flashing.
All three lights remain illuminated when the battery is fully charged.
Why Do the Charging Lights Switch Off?
The charging indicators automatically switch off approximately 30 minutes after a full charge to conserve energy.
Why Does the Cleaning Reminder Flash?
The cleaning reminder flashes when the shaver is switched off.
This indicates that the shaving unit should be cleaned.
Rinse the shaving heads and hair chamber with warm water and allow the components to dry.
Why Is the Shaver Not Shaving Closely?
Shaving performance may decrease when the shaving heads become dirty, worn, or damaged.
Philips recommends thoroughly cleaning the shaving heads once a month or when shaving performance declines.
Replace the shaving heads every year or immediately if damaged.
Why Does the Shaver Cause Mild Irritation?
The skin may need time to adapt to a new rotary shaving system.
Philips recommends using the shaver exclusively for three weeks.
Avoid pressing too hard against the skin, as excessive pressure may cause irritation.
Why Has Shaving Performance Decreased After Cleaning?
If the cutters and guards were mixed during thorough cleaning, the original matching pairs may no longer be together.
This can reduce shaving performance.
It may take several weeks for performance to return to normal.
Storage Instructions
The shaver should be cleaned, dried, and disconnected from charging equipment before storage.
How to Store the Shaver
- Switch off the shaver.
- Remove the charging power cord from the electrical outlet.
- Disconnect the small charging plug from the shaver.
- Clean the shaving unit and beard styler attachment.
- Allow all components to dry completely.
- Store the shaver in its travel pouch.
- Keep the power cord and accessories protected from damage.
Storage Precautions
- Do not wrap the charging cord around the shaver.
- Do not store the shaver where it may be crushed, struck, or damaged.
- Keep the power cord away from sharp edges and potential damage.
- Do not store connected charging equipment near water.
- Allow the shaver and attachments to dry completely before storage.
Replacement Parts and Accessories
Philips identifies original SH71 shaving heads as the replacement shaving heads for the Series 6000.
Replacement Accessories
| Accessory | Model Number | Purpose |
| Philips Norelco Replacement Shaving Heads | SH71 | Replaces the three rotary shaving heads. |
| Philips Detachable Power Cord | HQ8505 | Original charging power cord. |
Replacement accessories are available through:
Battery Disposal and Recycling
The Philips Norelco Series 6000 contains a rechargeable lithium-ion battery.
The battery and electrical components must be recycled or disposed of according to applicable local regulations.
Do not discard the battery with ordinary household waste.
Battery Recycling Instructions
- Contact local waste management authorities for approved recycling options.
- Use an authorized battery recycling location.
- Follow local battery disposal requirements.
Battery Handling Precautions
- Do not puncture or dismantle the battery.
- Do not expose the battery to fire.
- Do not allow battery terminals to contact metal objects after removal.
- Do not wrap removed batteries in aluminum foil.
- Cover battery terminals with tape or place the battery in a plastic bag before disposal.
- Keep hands and battery components dry when handling batteries.
Recycling Information
| Service | Contact |
| Battery Recycling | https://www.call2recycle.org |
| Battery Recycling Telephone | 1-800-822-8837 |
| Philips Recycling | https://www.recycle.philips.com |
| Philips Product Support | https://www.philips.com/support |
Warranty Information
Full Two-Year Warranty
Philips North America LLC provides a two-year warranty beginning on the date of purchase.
The warranty covers qualifying defects in materials or workmanship.
Philips agrees to repair or replace a defective product without charge during the warranty period.
Warranty Exclusions
The warranty does not cover:
- Shaving heads.
- Damage caused by accidents.
- Damage resulting from misuse or abuse.
- Damage caused by insufficient care.
- Damage caused by attachments not supplied with the product.
- Lost parts.
- Damage resulting from use with incorrect voltage or batteries.
The warranty also limits responsibility for certain special, incidental, or consequential damages where permitted by law.
Warranty Service
For warranty assistance, visit:
https://www.philips.com/support
Philips recommends using prepaid insured shipping when returning a product for warranty service.
Damage occurring during shipment is not covered by the warranty.
The warranty provides specific legal rights, and additional rights may vary by state.
45-Day Money-Back Guarantee
Philips Norelco provides a 45-day money-back guarantee for qualifying purchases.
Philips recommends using the shaver exclusively for three weeks to allow the skin and beard to adapt.
If the shaving experience remains unsatisfactory after this period, the product may be returned according to the guarantee conditions.
Money-Back Guarantee Requirements
- Return the product with its original dated sales receipt.
- The receipt must show the purchase price and purchase date.
- Include the money-back guarantee return authorization form.
- Ship the product using prepaid, insured mail.
- Make sure the package is postmarked within 45 days of purchase.
- Philips may verify the original purchase price.
- Refunds cannot exceed the suggested retail price.
Philips does not accept responsibility for lost return shipments.
How to Request a Refund
- Visit https://www.PhilipsMoneyBack.com.
- Follow the return instructions.
- Prepare the shaver and original sales receipt.
- Complete the required return authorization form.
- Ship the product using prepaid, insured mail.
- Make sure the shipment is postmarked within 45 days of purchase.
Refund checks are generally delivered within six to eight weeks after Philips receives the returned product.
Customer Support Information
Philips provides assistance with charging equipment, shaving head replacement, grooming attachments, warranty service, and other product concerns.
Official Support Contacts
| Support Service | Contact |
| Philips Product Support | https://www.philips.com/support |
| Customer Support Telephone | 1-800-243-3050 |
| Product Registration | https://www.philips.com/welcome |
| Replacement Parts and Accessories | https://www.philips.com/store |
| Money-Back Guarantee | https://www.PhilipsMoneyBack.com |
| Battery Recycling | https://www.call2recycle.org |
| Battery Recycling Telephone | 1-800-822-8837 |
| Philips Recycling | https://www.recycle.philips.com |
Online support information is available 24 hours a day, seven days a week.
Manufacturer Information
Philips Personal Health
A division of Philips North America LLC
P.O. Box 10313
Stamford, CT 06904
United States
Frequently Asked Questions
How do I use the Philips Norelco Series 6000 shaver?
Disconnect the charging power cord and switch on the shaver. Move the three rotary shaving heads across the skin using small circular movements. Apply gentle pressure, keep the shaving heads in contact with the skin, and switch off and clean the shaver after use.
How long does the Philips Norelco Series 6000 take to charge?
A full charge takes approximately one hour and provides up to 60 minutes of cordless operation. A five-minute quick charge provides enough battery power for one complete shave.
What does the flashing orange light mean on the Philips Norelco Series 6000?
A flashing orange bottom battery indicator means the battery is almost empty. Recharge the shaver using the original Philips HQ8505 power cord.
Can the Philips Norelco Series 6000 be used in the shower?
Yes. The shaver is waterproof and suitable for wet and dry shaving, including shower use. It must be disconnected from the charging power cord before use.
How do I unlock the Philips Norelco Series 6000 travel lock?
Press and hold the On/Off button for three seconds. The travel lock deactivates, and the shaver switches on automatically. Connecting the shaver to an electrical outlet also releases the travel lock.
How do I use the Philips Norelco Series 6000 beard styler?
Attach the beard styler to the shaver handle, install the comb, and select a trimming length from 1 mm to 5 mm. Switch on the shaver and move the attachment upward while keeping the comb in contact with the skin. Remove the comb for closer outlining at approximately 0.5 mm.
How do I clean the Philips Norelco Series 6000?
Switch on the cordless shaver and rinse the shaving unit under warm running water. Switch it off, open the shaving unit, rinse the hair chamber and shaving head holder, and allow the components to air-dry. Thoroughly clean the individual shaving heads once a month.
