Barista Series Milk Frother

Organized by the ManualsPedia teamPage updated:

Check your product’s exact model and region against the document. Manufacturer instructions and safety notices take priority.

Purée Barista Series Milk Frother
Document DetailInformation
Document TypeUser Manual
Brand NamePurée
Product NameBarista Series Milk Frother
PDF File Size196 KB
Number of Pages1
Languages CoveredEnglish

Purée Barista Series Milk Frother

The Purée Barista Series Milk Frother is a handheld, battery-powered frother designed to whip milk into foam using a stainless steel double whisk. It uses a one-button control and operates on two AA batteries.

According to the manual, the frother can be used with warm or cold milk and is intended to create milk foam for beverages such as cappuccinos. The manual also lists mixing salad dressings and powdered drinks among its possible uses.

The unit consists of a handheld body, power button, metal wand, double whisk, and stand. This guide reorganizes the instructions from the supplied manual into an easy-to-follow format for setup, operation, cleaning, safety, and product reference.  

Product Features

The Purée Milk Frother includes the following features:

  • One-button operation.
  • Durable wand with a stainless steel whisk.
  • Ergonomically shaped handle for handheld use.
  • Battery operation using two AA batteries.
  • Double-whisk design for creating milk foam.
  • Suitable for frothing milk.
  • Can also be used for mixing salad dressings and powdered drinks.

Parts and Components

The product diagram in the manual identifies five main components.  

PartDescription
Power ButtonLocated at the top of the frother and used to start or stop operation
HandleMain handheld body of the milk frother
StandSupports the frother when it is not being held
WandMetal shaft connecting the handle to the whisk
Double WhiskWhisking component used to froth or mix liquids

Technical Specifications

SpecificationValue
Power3V / 1.5A
Battery Type2 × AA batteries
Product Size1.6 × 1.2 × 8.8 in.
Product Weight0.12 lbs.

Important Safety Instructions

The following precautions should be followed when using or cleaning the Purée Milk Frother:

  • Do not attempt to pull the wand out of the unit.
  • Do not bend the wand.
  • Do not operate the Milk Frother with wet hands.
  • Do not place the unit in a dishwasher.
  • Do not submerge the handle in water or any other liquid.
  • Do not use the unit if it is malfunctioning or damaged in any way.

The manual specifically states that the Milk Frother is not dishwasher safe.  

Before First Use

The Milk Frother should be cleaned before it is used for the first time.

The unit also requires two AA batteries before operation.

Installing the Batteries

  1. Open the battery compartment.
  2. Insert 2 AA batteries.
  3. Close the battery compartment lid.
  4. Make sure the lid is securely closed before operating the frother.

The batteries should be replaced when necessary.

How to Use the Purée Milk Frother

The manual provides a seven-step process for frothing milk.

1. Clean the Frother

Clean the Milk Frother before first use.

2. Install Two AA Batteries

Open the battery compartment, install two AA batteries, and securely close the lid.

3. Prepare the Milk

Fill a cup or beaker with approximately 2 to 4 ounces of warm or cold milk.

Insert the Milk Frother into the milk so that the whisk is close to the bottom of the container.

4. Turn the Milk Frother On

Press and hold the power button to turn the Milk Frother on.

While the whisk is running, gently move the frother up and down until the milk begins to foam.

5. Froth Near the Surface

Keep the whisk close to the surface of the milk and continue whipping it for approximately 20 to 30 seconds.

The manual indicates that frothing can continue until the milk has approximately doubled in volume.

6. Turn the Frother Off

Release the power button to switch off the Milk Frother.

7. Add the Foam to the Beverage

Pour the milk foam into the desired beverage or use a spoon to scoop the foam from the container.

Using Warm or Cold Milk

The Purée Milk Frother can be used with either warm or cold milk.

The manual recommends placing approximately 2 to 4 ounces of milk in a cup or beaker before frothing.

For the main frothing stage, the whisk should first be positioned near the bottom of the container. As foam begins to develop, the whisk should be kept near the surface while the milk is whipped for approximately 20 to 30 seconds.

Power Button Operation

The Purée Milk Frother uses a simple press-and-hold control.

To Turn the Frother On

Press and hold the power button.

To Turn the Frother Off

Release the power button.

The manual describes this as one-button operation, so no separate speed settings or operating modes are required for the documented frothing procedure.

Cleaning and Maintenance

The whisk and wand should be cleaned after use following the instructions in the manual.

How to Clean the Milk Frother

  1. Rinse the whisk and wand with hot water.
  2. Turn the Milk Frother on for a few seconds to assist with cleaning and drying the whisk, or wipe it dry with a clean, dry cloth.
  3. Replace the two AA batteries when necessary.

Cleaning Precautions

The Milk Frother is not dishwasher safe.

The handle should not be submerged in water or another liquid. The manual also warns against operating the unit with wet hands.

Battery Maintenance

The frother operates on two AA batteries.

When battery replacement becomes necessary:

  1. Open the battery compartment.
  2. Remove the existing batteries.
  3. Install two AA batteries.
  4. Securely close the battery compartment before operating the frother again.

Care of the Wand and Whisk

The metal wand and double whisk are important operating components and should be handled carefully.

The manual specifically warns against:

  • Pulling the wand out of the unit.
  • Bending the wand.
  • Submerging the handle while cleaning.
  • Continuing to use the unit if it becomes damaged or malfunctions.

The whisk and wand can be rinsed with hot water as part of normal cleaning.

Customer Support

The manual provides Tzumi customer support for questions or concerns regarding the Purée Milk Frother.

Support MethodDetails
Phone1-855-GO-TZUMI
Emailsupport@tzumi.com

The manual states that an experienced customer support representative can assist with questions concerning the Purée Milk Frother.  

Product and Distribution Information

The manual identifies the product as the Purée Milk Frother and states that it is distributed by Purée in New York, NY 10016.

The document carries a © 2024 Purée copyright notice and identifies the product as made in China.

Frequently Asked Questions

How many batteries does the Purée Milk Frother use?

The Purée Milk Frother uses two AA batteries. The battery compartment should be securely closed after the batteries are installed.

Can the Purée Milk Frother be used with cold milk?

Yes. The manual states that the frother can be used with warm or cold milk.

How much milk should be used with the Purée Milk Frother?

The manual recommends filling a cup or beaker with approximately 2 to 4 ounces of milk before frothing.

How long should milk be frothed?

After the milk begins to foam, the whisk should be kept near the surface and operated for approximately 20 to 30 seconds, or until the milk has doubled in volume.

How is the Purée Milk Frother turned on and off?

Press and hold the power button to turn the frother on. Release the power button to turn it off.

Is the Purée Milk Frother dishwasher safe?

No. The manual specifically states that the Milk Frother is not dishwasher safe and should not be placed in a dishwasher.

How should the Purée Milk Frother be cleaned?

Rinse the whisk and wand with hot water. The frother can then be switched on for a few seconds, or the cleaned components can be wiped dry with a clean, dry cloth. The handle must not be submerged in water or another liquid.

What should be done if the Milk Frother is damaged or malfunctioning?

The manual instructs users not to use the unit if it is malfunctioning or damaged in any way. Customer support can be contacted at 1-855-GO-TZUMI or support@tzumi.com.

Have you found an issue with this page?

Help us identify a wrong model, missing document or broken link. Include the page URL and product model when contacting the team.

Report a correction