Samsung Galaxy A36 5G

Answers to common Galaxy A36 5G questions on charging, SIM and microSD cards, restarting, overheating, water resistance, biometrics and Bluetooth.
Document type
User Manual
Model number(s)
SM-A366B, SM-A366B/DS, SM-A366E/DS
Language
English

Read the User Manual (PDF)

Follow the manufacturer’s safety warnings and check your exact model before using these instructions.

How do I restart my Galaxy phone, and what can I do if it freezes?

To restart normally, press and hold the Side button and the Volume Down button at the same time, or open the quick settings panel and tap the Power off icon. Then tap Restart and tap Restart again to confirm. If the phone is frozen and unresponsive, press and hold the Side button and the Volume Down button together for more than 7 seconds to force a restart.

If a restart does not fix the problem, the guide’s last software step is a factory data reset. Open Settings, tap General management, tap Reset, tap Factory data reset, tap Reset, and then tap Delete all. A reset wipes the phone, so back up anything important first. If the problem still is not resolved, contact a Samsung Service Centre or an authorised service centre.

Why is my Galaxy phone not charging, or why is fast charging not working?

First make sure the charger is connected properly, then check the charging settings. Fast charging requires a super fast charger or fast charger. If it does not work, open Settings, tap Battery, tap Charging settings, and confirm the feature you want is turned on. Also check that the USB cable and the USB power adapter are connected properly. You can see the charger’s connection status under Settings, then Battery.

A few other conditions can get in the way:

  • A completely discharged battery will not let the phone turn on right away. Let it charge for a few minutes first.
  • If the multipurpose jack is wet, dry it thoroughly before charging, because charging with a wet jack can damage the phone.
  • Charging from a computer is slower because the electric current is lower.
  • If the battery gets hotter than usual, the charger may stop charging.
  • Use the USB Type-C cable supplied with the phone. Samsung warns that a Micro USB cable may cause damage.

No charger is included in the box, and the supplied cable supports up to 3A. On the Galaxy A56 5G and Galaxy A36 5G, Samsung recommends an official 45W charger and a compatible USB cable, both sold separately. If the phone still does not charge properly, take the phone, the charger and the USB cable you use to a Samsung Service Centre or an authorised service centre.

How can I make the battery last longer?

The guide gives a short list of habits. Turn off the screen with the Side button when you are not using the phone, turn on power saving mode, close unnecessary apps, and turn off Bluetooth when you are not using it. Also turn off auto-syncing for apps that sync, shorten the screen backlight time, lower the screen brightness, and run the device care feature to optimise the phone.

Several settings help as well. Under Settings, then Battery, you can turn on Power saving, set Background usage limits for apps you rarely use, and turn on Auto dim screen. Battery protection can stop charging when the battery is full or limit the maximum charge to a level you choose. Under Display, setting Motion smoothness to Standard uses a standard refresh rate to conserve power.

The guide also notes that GPS, games and the internet use more battery. Very cold or very hot temperatures can reduce the useful charge. A metallic sticker or metallic cover over the antenna area can cause connectivity problems and battery drain. The battery is a consumable part, so its useful charge gets shorter over time.

How do I insert a SIM card or set up an eSIM?

Use only a nano-SIM card. Insert the ejection pin into the hole on the tray to loosen it, then pull the tray out gently. Place the card with the gold-coloured contacts facing up and press it gently into the tray. Slide the tray back in fully. Keep the ejection pin perpendicular to the hole, or the phone may be damaged. Make sure the tray is dry, and push it in completely so liquid cannot get inside.

For an eSIM, open Settings, tap Connections, tap SIM manager, and tap Add eSIM, then follow the on-screen instructions. If your carrier gave you a QR code, tap Scan QR code and scan it. eSIM may not be available depending on the region, carrier or model. Using both a nano-SIM and an eSIM, or two eSIMs, may slow data speeds in some areas. On dual SIM models, SIM manager also lets you choose preferred SIMs for features such as voice calls and set up data switching, which may cost extra.

Can I use a microSD card, and how do I insert, format and remove it safely?

Only the Galaxy A55 5G and Galaxy A35 5G support a microSD card. The Galaxy A56 5G and Galaxy A36 5G have a SIM card tray only. The tray is loosened and removed the same way as the SIM tray, with the card’s gold-coloured contacts facing up. Use only a microSD card, because an incompatible card may damage the phone, the card or the data on it. Maximum supported capacity varies, so check the Samsung website.

The phone supports the FAT and exFAT file systems. A card formatted differently will need reformatting, and a card formatted on a computer may not work properly. To format on the phone, open Settings, tap Device care, tap Storage, swipe left to the SD card page, tap the More options icon, and tap Format. Back up your data first, because the warranty does not cover data lost through user actions.

To remove the card, unmount it first using the same path and tapping Unmount. Never remove it while data is being transferred or accessed. Removing the tray also disables the mobile data connection.

What should I do if my Galaxy phone gets hot?

Warmth while charging is normal and does not affect the phone’s lifespan or performance. It can be more noticeable with fast or wireless charging, where supported. If the phone gets hotter than that, disconnect the charger, close running apps, let it cool, and then charge again. If the lower part of the phone overheats, the USB cable may be damaged, so replace it, ideally with a Samsung-approved cable.

During normal use, the guide lists these steps:

  • Close apps you are not using and stop using the phone for a while.
  • Restart the phone.
  • Keep the software up to date.
  • Turn off Wi-Fi, GPS and Bluetooth when they are not needed.
  • Lower the screen brightness.
  • Delete unused apps and unnecessary files.

If the phone overheats or stays hot for a long time, stop using it for a while. If it keeps overheating, contact a Samsung Service Centre or an authorised service centre.

On supported models the phone protects itself when hot. Brightness, refresh rate and performance are limited, and charging may slow or stop. At a certain temperature a warning message appears, running apps close, and everything except emergency calls is limited. If the temperature keeps rising, a second message appears and the phone turns off. The recommended operating temperature is 0 °C to 35 °C.

Is the Galaxy A36 5G water resistant, and what should I do if it gets wet?

The phone is water and dust resistant with an IP67 rating. Samsung tested it under the IEC 60529 standard at 15–35 °C and 86–106 kPa, in 1 m of fresh water for 30 minutes without moving. The rating is not permanent and may diminish over time from normal wear and tear. An external shock or damage can also reduce water resistance.

Keep the phone out of swimming pool water and sea water. Avoid water moving with force and places with sudden temperature changes, such as a sauna or steam room. If it is exposed to unclean liquids such as soapy water, oil, perfume, sunscreen, hand cleaner, cosmetics or anything containing alcohol, clean it with still fresh water, wipe it with a soft clean cloth, and dry it thoroughly.

After any exposure, wipe and dry the phone thoroughly. A microphone or speaker that is not fully dry can make calls sound unclear. Do not connect the charger or accessories until the phone is completely dry, because a wet multipurpose jack can cause damage.

How do I take a screenshot or record my screen?

To take a screenshot, press the Side button and the Volume Down button at the same time. You can also swipe the edge of your hand left or right across the screen. If swiping does nothing, open Settings, tap Advanced features, tap Motions and gestures, and turn on Palm swipe to capture. Screenshots are saved in Gallery. Some apps and features do not allow capture.

After capturing, the toolbar lets you scroll-capture a long page, such as a webpage, and write on, draw on, crop, tag or share the image. If the toolbar is missing, open Settings, tap Advanced features, tap Screenshots and screen recordings, and turn on Show toolbar after capturing.

To record the screen, open the quick settings panel, tap the Expand icon, and tap Screen recorder. Choose a sound setting and tap Start recording. After a countdown, recording begins. You can draw on the screen or add a selfie video overlay while recording. Tap the Stop icon to finish, and find the video in Gallery.

How do I set up fingerprint or face unlock, and why does the phone still ask for my PIN?

Both methods require a screen lock method first. For a fingerprint, open Settings, tap Security and privacy, tap Screen lock and biometrics, tap Fingerprints, and follow the instructions. Afterward, turn on the Fingerprint unlock switch. Turn on Fingerprint always on if you want recognition while the screen is off. For better results, keep your finger and the sensor area clean and dry, and press so your fingertip covers a wide part of the sensor. If you use a screen protector, make sure it is labelled as compatible with the fingerprint sensor.

For face unlock, open the same Screen lock and biometrics menu, tap Face recognition, read the instructions and tap Register. Register indoors and out of direct sunlight, with a clean camera lens. Afterward, turn on the Face unlock switch. You can add an alternative appearance to improve recognition. Samsung notes that someone who looks like you could unlock the phone and that face recognition is less secure than a pattern, PIN or password.

The first unlock after turning the phone on always requires the pattern, PIN or password you set when registering. Changing the screen lock to Swipe or None deletes all biometric data. If you forget your unlock code, you cannot use the phone without resetting it, and Samsung is not responsible for data loss from a forgotten code.

How do I move my data from an old phone or back up the Galaxy?

To move data from your previous device, open Settings, tap Accounts and backup, and tap Transfer data for device setup. Then follow the on-screen instructions. Smart Switch can transfer over a USB cable or wirelessly, and it can also use external storage or a computer. It may not be supported on some devices or computers, so check www.samsung.com/smartswitch for details. Samsung asks that you transfer only content you own or have the right to transfer. During first-time setup, some features may be unavailable if you are not connected to Wi-Fi.

To back up with Samsung Cloud, open Settings, tap Accounts and backup, and tap Back up data under Samsung Cloud. Turn on the items you want, tap Back up now, then tap Done. To restore, tap Restore data, choose a device, tick the items, and tap Restore. Some data is not backed up. The guide recommends backing up regularly to a safe place such as Samsung Cloud or a computer, because data lost to an unintended factory reset cannot be restored without a backup.

How do I change what the Side button does?

By default, pressing the Side button turns the screen on or locks it, and pressing and holding it while the phone is off turns the phone on. Pressing it twice or pressing and holding it opens the app or feature you set. To change this, open Settings, tap Advanced features, and tap Side button. Then choose what you want for double press and for press and hold.

Under Long press, you can pick Bixby, so that holding the Side button lets you speak a request, or Power off menu. If you want a long press to bring up the power menu, set Long press to Power off menu. A double press opens the Camera app unless you change it. The Side button is also part of other shortcuts, such as Side button plus Volume Down to take a screenshot or open the power menu. It also triggers Emergency SOS if you press it several times as set on that feature’s settings screen.

What can I do if Bluetooth will not connect to another device?

Start by confirming the other device is ready to be scanned or connected to, and that it is within the maximum Bluetooth range of 10 m. Obstacles between the devices can shorten the working distance. If the device is not in the list, put it into Bluetooth pairing mode, which is described in that device’s user guide. Your phone is visible to other devices only while the Bluetooth settings screen is open.

If it still fails, turn Bluetooth off and on again. Open Settings, tap Connections, and tap the Bluetooth switch. For a stronger step, open Settings, tap General management, tap Reset, tap Reset Wi-Fi and Bluetooth settings, and tap Reset settings. This may erase registered information, such as saved connections. To pair, tap the device in the list and accept the connection request on your phone and the other device. To unpair, tap the Settings icon next to the device name and tap Unpair. If none of this works, contact a Samsung Service Centre or an authorised service centre.

Follow the manufacturer’s safety warnings and check your exact model before using these instructions. Report an error.

Document information and editorial sourcing

The product instructions/information above in this page are based on the original manufacturer document.

Last updated: November 16, 2026

Find more product manuals in:

Related Samsung Manuals