The Philips BDP5110 is a Blu-ray Disc player that outputs up to 1080p video over HDMI and upscales standard DVDs to as high as 1080p. It plays audio CDs and Kodak Picture CDs, DivX video from discs, and MP3, Windows Media Audio, and JPEG files from discs or SD cards. A LAN port adds BD-Live, Netflix (U.S. only), vTuner Internet radio, and firmware updates. The cover lists BDP5010, BDP5110/F7 (U.S. and Canada), and BDP5110/F8 (Mexico). Region details are given only for the F7 and F8.
Product Specifications
| Item | Specification |
| Power | 120 V AC, 60 Hz |
| Power consumption | 20 W (standby 0.5 W) |
| Dimensions (W x H x D) | 14.2 x 2.0 x 8.5 in (360 x 50 x 215 mm) |
| Weight | 4.4 lb (2.0 kg) |
| Operating temperature | 41°F to 104°F (5°C to 40°C) |
| Operating humidity | Less than 80% (no condensation) |
| Signal system | NTSC color |
| HDMI output | 480p, 720p, 1080i, 1080p |
| Component video out | Y: 1 Vp-p; PB/CB and PR/CR: 700 mVp-p (75 Ω) |
| Composite video out | 1 Vp-p (75 Ω) |
| Analog audio out | L/R, 2 Vrms |
| Digital audio out | Coaxial, 500 mVp-p (75 Ω) |
| Network | LAN, 10BASE-T / 100BASE-TX |
What’s in the Box
The package includes the remote control, two AAA (1.5 V) batteries, the user manual, a quick start guide, a registration card, a Netflix box insert, and RCA audio/video cables (p. 4). An HDMI cable is not included.
Playable Discs and Cards
The player handles BD-video, finalized DVD-video, finalized DVD-RW/-R, audio CD, CD-RW/-R, Kodak Picture CD, DTS-CD, and BD-RE/-R recorded in BDMV format (p. 20). Unfinalized discs, DVD-RAM, DVD-audio, HD DVD, video CD, and SVCD will not play (p. 21).
The player reads NTSC discs only. BD-video must be region “A.” DVDs must be “ALL” or “1” for the BDP5110/F7, or “ALL” or “4” for the BDP5110/F8 (p. 21).
Supported cards are SD (8 MB to 2 GB) and SDHC (4 GB to 8 GB), plus miniSD and microSD with an adapter. Cards formatted on a computer may not be read. If that happens, reformat the card in the player (p. 20).
Parts and Controls
The front panel has the disc tray, open/close, stop, play, standby-on, an infrared sensor, a display, and the SD slot. The rear panel has the AC cord, LAN terminal, HDMI OUT, analog AUDIO OUT, component and composite VIDEO OUT, and a coaxial DIGITAL OUT (p. 9). There is no RF modulator. Don’t touch the inner pins of the rear jacks, because static discharge can permanently damage the unit.
On the remote, the home button opens the home menu, [HDMI] cycles the output resolution, and the colored buttons act as shortcuts on some discs and menus. The remote works up to about 23 feet (7 m) in a straight line, with less range off to the side (p. 11). Match the battery polarity, never mix old and new batteries, and remove them if the remote will sit unused for a month or more.
Connecting the Player
Turn off all devices before changing connections. Choose one video connection (p. 14):
- HDMI (best): Supports up to 1080p and 1080p/24. A High Speed HDMI cable is recommended, and no separate audio cable is needed.
- Component (better): Supports up to 1080i. Add the RCA audio cable.
- Composite (basic): 480i only. Connect directly to the TV, not through a VCR, or copy protection may distort the picture.
HDMI playback requires an HDCP-compatible display (p. 16). For audio, use the analog L/R jacks for a stereo system, the coaxial jack for a receiver or decoder, or HDMI to a receiver with an HDMI input (pp. 17-18).
To go online, connect a LAN cable to a broadband router or hub. Use only a LAN cable in that port, and don’t connect a PC directly to the player (p. 18). Then run Connection Test under Settings > Advanced Setup > Others > Network Connection (p. 48).
Setup and Basic Playback
- Connect everything, then press the standby-on button.
- Turn on your TV and select the input the player is connected to (often labeled SOURCE, AV, or SELECT).
- Press the open/close button, place the disc label side up, and press the button again to close the tray.
- If playback doesn’t start by itself, press Play. Use [TOP MENU] or [DISC MENU / POP-UP MENU] for disc menus.
Pressing Stop saves the stopping point (Resume-On-Stop). Pressing Play continues from there, while pressing OK restarts from the beginning (p. 23). For music, video, or photo files, choose Disc Tray, then Video, Music, or Pictures.
Special playback includes fast forward and reverse (five speeds for BD, DVD, and AVCHD), slow forward, step, zoom, repeat, A-B repeat, and slide shows. Zoom doesn’t work during BD-video playback (p. 29). Subtitles, audio tracks, and camera angles change with the [SUBTITLE], [AUDIO], and [ANGLE] buttons where the disc supports them.
Netflix, BD-Live, and Internet Radio
Netflix is available only in the United States, and you can’t create an account on the player. Sign up at netflix.com/Philips first. Then select NETFLIX on the home menu, choose “yes – activate instant streaming from Netflix,” and enter the on-screen code at netflix.com/activate on a computer (p. 34).
BD-Live requires an Internet connection and an SD card. A 1 GB card formatted in the player is recommended, and the card should stay in place during use (p. 31).
vTuner offers Internet radio. Only MP3 and WMA stations play, and a broadband connection is advised (p. 35).
Key Settings
Open Settings > Advanced Setup from the home menu (p. 37).
- HDMI Video Resolution: Auto, 480p, 720p, 1080i, or 1080p. If the screen stays blank after a change, press [HDMI] again or hold Play on the front panel for 5 seconds to restore the default (p. 43).
- TV Shape: 4:3 Normal, 4:3 Crop, 16:9 Widescreen, or 16:9 Squeeze, matched to your TV (p. 43).
- HDMI Audio and Digital Out: With an HDMI cable connected, set HDMI Audio to Off before changing Digital Out (p. 39).
- Ratings Lock: Sets a rating level from 1 (Kid Safe) to 8 (Adult) with a four-digit PIN. The PIN 4737 can’t be used (p. 47).
- Auto Standby: When on, the player switches to standby 25 minutes after the screen saver starts, or after 30 minutes of inactivity if the screen saver is off (p. 40).
Firmware can be updated from a disc or over the Internet. Don’t unplug the player during an update (p. 52). Factory Default resets settings but keeps Ratings Lock and Network Connection.
Safety Instructions
- Keep the player away from rain and moisture, and don’t place liquid-filled objects such as vases on it (p. 2).
- Don’t open the cover. There are no user-serviceable parts, and the laser can cause eye injury (p. 3).
- Don’t block the ventilation openings or install the player near radiators, stoves, or other heat sources.
- Use a stable, horizontal surface away from direct sunlight, dust, and strong vibration. Don’t put anything on top of the unit.
- Pull the plug, not the cord, and never handle the cord with wet hands. Unplug during lightning storms or long periods of non-use.
- After moving the unit from a cold place to a warm one, wait a few hours before use because of dew condensation (p. 3).
- Remove the disc and unplug the player before carrying it. Don’t play heart-shaped or octagonal discs.
Cleaning and Maintenance
Wipe the exterior with a soft cloth. Never use solvent, thinner, benzene, alcohol, or insecticide spray. Clean discs from the center outward, not in circles, and avoid solvents or antistatic sprays made for records. If the player still misbehaves, the laser lens may be dirty. Have a dealer or authorized service center clean it (p. 4).
Troubleshooting
| Problem | What to try |
| Remote does nothing | Check power, point at the sensor, check battery direction, or fit new batteries. |
| No picture | Turn on the TV, select the right input, press [HDMI] to change resolution, or hold Play for 5 seconds. |
| No sound from TV | Assign the TV’s audio input to the matching video input. |
| Disc won’t play | Check compatibility and region code, make sure DVD-R/RW discs are finalized, and clean the disc. |
| Buttons unresponsive | Hold standby-on for 10 seconds, or unplug the cord for 5 to 10 seconds. |
| Can’t connect to network | Check the LAN cable, turn on the modem or router, and review network and BD-Live settings. |
| BD-Live won’t work | Insert an SD card with 1 GB or more. |
Frequently Asked Questions
Why won’t my Blu-ray or DVD play?
The usual causes are an unsupported disc type, the wrong region code, or an unfinalized recordable disc. The player supports BD region “A” and the DVD regions listed above, and it plays only NTSC discs.
Does the player have Wi-Fi?
The network connection is described only through the LAN port. No wireless option is covered.
Why is my screen blank after changing the HDMI resolution?
The screen goes blank briefly after a change. If the picture doesn’t return, press [HDMI] repeatedly or hold Play on the front panel for 5 seconds to restore the default.
Can I use Netflix in Canada or Mexico?
No. The player’s Netflix feature is available only in the United States.
What do I need for BD-Live?
An Internet connection and an SD card of 1 GB or more formatted in the player. Some discs need this storage to play at all.
How do I reset the player if it freezes?
Hold the front standby-on button for 10 seconds, or unplug the power cord for 5 to 10 seconds.
I forgot my Ratings Lock PIN. What now?
Enter 4737 at the PIN prompt. This clears the current PIN and Ratings Lock settings, and you can then create a new PIN (p. 47).
