The Philips BDP1305 is a compact Blu-ray Disc and DVD player that sends picture and sound to your TV or AV receiver over a single HDMI cable. It plays Blu-ray Disc, DVD and audio CD media, along with AVCHD and JPEG files, and it upscales standard-definition DVDs to as high as 1080p. A USB port on the front accepts a memory stick for photos and for extra content some BD-ROM discs store. HDMI is the only output on the rear panel, and the player has no internet connection, so BD-Live is not supported. Software updates are installed from a disc or USB stick instead. The manual is split by serial number: if yours starts with DS, read pages 3–48 of the PDF; if it starts with 9C, read from page 49 on. Differences between the two editions are noted below.
Product Specifications
| Item | Detail |
| Signal system | NTSC color |
| Power requirements | 120 V AC, 60 Hz |
| Power consumption | 15 W (standby: 0.5 W) |
| Dimensions (W x H x D) | 11.1 x 1.7 x 8.3 inches (280 x 41 x 201 mm) |
| Weight | 2.21 lbs (1.0 kg) |
| Operating temperature | 41°F to 104°F (5°C to 40°C) |
| Operating humidity | Less than 80% (no condensation) |
| HDMI output | 480p, 720p, 1080i, 1080p, 1080p/24 |
| USB input | Type A |
To meet ENERGY STAR requirements, the player turns on its screen saver after 5 minutes of inactivity and enters standby after 25 minutes (PDF p. 9).
What’s in the Box
- Quick Start Guide
- Remote control (NC270MH on DS units, NC271UL on 9C units)
- Two AAA 1.5V batteries
An HDMI cable is not included. Use a certified cable; a high speed HDMI cable is recommended for better compatibility.
Parts and Controls
The front panel holds the disc tray, power-on indicator, infrared sensor window, Open/Close button, power button and USB input. The rear panel has only the AC power cord and the HDMI OUT jack. The power button is labeled Standby/On on DS units and Power on 9C units.
- Do not connect anything to the USB input except a USB memory stick or USB card reader. That rules out PCs, external hard drives, cameras, keyboards and mice. Plug the stick in directly, without an extension cable.
- Do not touch the inner pins of the rear jacks. Static discharge can permanently damage the player.
On the remote, Home opens the home menu (Play Disc, Browse USB, Setup), Options opens the play menu during playback, Disc Menu calls up a disc’s top or pop-up menu, and the colored buttons act as disc shortcuts. Insert two AAA batteries with matching polarity, and do not mix old and new ones. The remote works up to about 23 feet (7 m) straight ahead.
Connecting and Setting Up
Turn every device off before changing connections.
- Connect an HDMI cable from the player’s HDMI OUT jack to an HDMI IN jack on your TV. For an AV receiver, run HDMI from the player to the receiver, then from the receiver to the TV.
- Plug in the power cord and press the power button.
- Switch the TV to the matching HDMI input.
- Pick your menu language. DS units show a welcome screen first; select Next. On 9C units, a second screen asks whether to turn Voice Guide on or off. Voice Guide works only in English or Spanish.
If you picked the wrong language, press Home, open Setup, choose Preference Setup, then Menu Language.
Leave at least 5.9 inches (15 cm) of clear space around the player, and do not put it in a closed cabinet or cover its vents (PDF p. 5). After moving it from a cold place to a warm one, let it dry for a few hours before use.
Playing Discs and USB Files
The player handles BD-video, BD-RE (ver. 2.1) and BD-R (ver. 1.1/1.2/1.3) in BDMV format, DVD-video, finalized video-mode DVD-RW/-R, audio CD, CD-R/RW and DTS-CD. It also plays AVCHD files from DVD-RW/-R, and JPEG files from BD-RE/-R, DVD-RW/-R, CD-RW/-R or USB.
It cannot play CD-ROM, DVD-RAM, DVD-audio, HD DVD, video CD, SVCD, BDXL, DivX files, unfinalized discs or 3D Blu-ray discs. Blu-ray discs must be region A, and DVDs must be region 1 or ALL. USB sticks must be FAT16 or FAT32; NTFS is not supported.
Playing a Disc
- Press Open/Close and place the disc on the tray, label side up.
- Press Open/Close again to close the tray.
- Playback usually starts on its own. If not, press Play/Pause.
- For discs with photo or AVCHD files, choose the file type and press OK.
Press Stop once to stop with resume memory, so Play/Pause continues from that point. Press Stop again to clear it. To play from a USB stick, press Home and choose Browse USB.
Special Playback
Fast forward and reverse offer five speeds on Blu-ray, DVD and AVCHD discs. Slow forward has three speeds, and pausing then pressing the right skip button advances one frame at a time. Slow reverse and step reverse are not available. Press Options during playback to reach Search, Audio, Subtitle, Repeat, Angle, PiP, Noise Reduction and CLEAR+.
Key Settings
Open Setup from the home menu.
| Setting | Options |
| TV Display | 4:3 Normal, 4:3 Crop, 16:9 Widescreen, 16:9 Squeeze |
| HDMI Video | Auto, 480p, 720p, 1080i, 1080p, 1080p/24 |
| HDMI Deep Color | Auto, Off (DS units only) |
| HDMI Audio | Bitstream, LPCM |
| EasyLink | On or Off, with One Touch Play and One Touch Standby |
Auto resolution picks the highest your display supports. On 9C units, Voice Guide sits under Audio Setup, and while it is on, HDMI Audio is fixed to LPCM.
Parental Control
The first time, enter any four digits except 4737, which is the reset code. Then open Setup, Preference Setup, Parental Control and pick a level from 1 to 8. Reset Settings leaves parental control untouched.
Software Update
- Download the update from www.philips.com/support to a blank disc or USB stick, saved in the root directory.
- Go to Setup, Advanced Setup, Software update, then choose Disc or USB.
- Insert the disc or stick and confirm. The unit restarts and updates itself.
Do not unplug the power, eject the media or enter standby during an update (PDF p. 36).
Safety Instructions
- Keep the player away from water, rain, dripping liquids and heat sources, and never set a vase or other liquid-filled object on it.
- Do not open the cover. There are no user-serviceable parts, and the Class 1 laser can injure eyes if the unit is opened.
- Handle the power cord by the plug, never with wet hands.
- Do not place the unit on furniture a child could tip over, and never use a gas duster on it.
- Unplug it during lightning storms or long periods of non-use. Unplugging is the only way to turn it off completely.
Cleaning and Maintenance
Wipe the exterior with a soft cloth, never with solvent, thinner, benzene or alcohol. Clean discs by wiping from the center outward, not in circles, without detergents or abrasives. Heart-shaped or octagonal discs can damage the player. A dirty laser lens should be cleaned by an authorized service center. To test the remote, point a phone camera at it and press a button; infrared light should show on the screen.
Troubleshooting
| Problem | What to try |
| No power | Check the cord, try another outlet, or unplug for 5–10 seconds. |
| No picture or sound over HDMI | Confirm both devices are on, pick the right TV input, and use a certified cable. The player outputs no video unless the display supports HDCP. |
| Remote does not respond | Move closer, check battery polarity, and run the camera test. |
| Disc will not play | Check the region code, finalize DVD-RW/-R discs, and clean the disc. |
| Unit stops responding | Hold the power button for 10 seconds, or unplug for 5–10 seconds. |
| Stuck on “Loading…” | Unplug for 20 seconds, plug back in, and press Open/Close. |
| Blu-ray video will not play | Insert a USB stick with 256 MB or more free, formatted on this unit. |
Keep the model and serial number ready before calling 1-866-515-1124.
Frequently Asked Questions
Does the BDP1305 support BD-Live or 3D Blu-ray?
No. The player does not connect to the internet, so BD-Live is not supported, and 3D Blu-ray discs will not play.
How do I tell which edition of the manual applies to me?
Check the serial number on the cabinet or packaging. A DS prefix means the first edition applies; 9C means the second. The editions differ in remote model, HDMI Deep Color and Voice Guide.
What if I forget the parental control password?
Enter 4737 at the password prompt. This clears the password and sets the rating level to Off. You can then set a new one under Change Password.
What if a software update keeps failing?
The update screen returns at startup until an update completes. Try a USB stick with the file in its root directory, renamed to UPDATE10000PA1.BIN. The original name is ECM21UH10000PA1.bin on DS units and ECS21UL10000PA1.bin on 9C units. The name is case sensitive.
Why won’t my USB stick or SD card work?
The player reads FAT16 and FAT32 only, and some sticks are simply incompatible. Reformatting on the player may help, but it erases everything on the stick. SD cards need a USB card reader, and SDXC and microSDXC cards are not supported.
What warranty comes with the player?
A 90-day limited warranty covers defects in materials and workmanship for the original purchaser, with proof of purchase from an authorized retailer. In the U.S., Canada, Puerto Rico and the U.S. Virgin Islands, call Philips customer care at 1-866-515-1124.
