Oster 10-Cup Touch Screen Food Processor FPSTFPMP-TS
The Oster 10-Cup Touch Screen Food Processor FPSTFPMP-TS chops, mixes, blends and purees with a multipurpose blade, kneads dough and mixes batters with a dough blade, and slices or shreds with a reversible disc. A touch-screen control panel provides ON/OFF, LOW, HIGH and PULSE controls. The bowl holds up to 10 cups of dry ingredients or 2 cups of liquid. An interlock system keeps the motor from running unless the bowl and cover are properly locked in place.
Parts and Controls
Parts of the food processor
| Letter | Part |
|---|---|
| a | Food Pusher |
| b | Food Chute Lid |
| c | Reversible Slice/Shred Disc |
| d | Disc Stem |
| e | Multi-purpose Blade |
| f | Dough Blade |
| g | Bowl |
| h | Base |
| i | Control panel |
Control panel
The control panel has four touch controls: an ON/OFF button, LOW, HIGH and PULSE.
| Control | What it does |
|---|---|
| ON/OFF | Powers the unit on after assembly. Press OFF between jobs to stop the food processor. |
| LOW / HIGH | Starts continuous processing at the selected speed. Press the same button again when finished. |
| PULSE | Press and release to turn the food processor on and off quickly. Keep pressing for longer processing. |
The touch-screen display is sensitive to accidental contact with food and with your body. The food processor will not operate unless it is completely assembled, and you can select a function after the unit is powered on.
Important Safeguards
Read all instructions before using this product. These points are the ones that matter most for everyday use. The full list is in the original guide.
- Household use only. Do not use the appliance outdoors or for commercial purposes. Use it only for its intended purpose, on a dry, stable, level surface.
- Keep the base and cord dry. To protect against electric shock, do not place or immerse the cord, plugs or appliance in water or other liquid.
- Unplug when not in use, before putting on or taking off parts, and before cleaning. Let the unit cool before putting on or taking off parts and before cleaning. Do not disconnect by pulling on the cord.
- Blades and discs are sharp. Handle them carefully when removing them from the bowl, emptying the bowl and cleaning.
- Keep hands and utensils away from moving blades or discs. A scraper may be used, but only when the food processor is not running.
- Never feed food by hand. Always use the food pusher.
- Place the bowl first. Never place the cutting blade or discs on the base without first putting the bowl properly in place.
- Lock the cover securely before operating. Wait until all moving parts have stopped before removing any lid or cover. Do not try to defeat the cover interlock mechanism.
- Do not fill the bowl above the marked maximum fill line (or rated capacity). Overfilling risks injury from damage to the cover or bowl.
- Do not use a damaged cord or plug, or operate the appliance after it malfunctions or is damaged in any way. Do not try to replace or splice a damaged cord. Return the appliance to the manufacturer (see warranty) for examination, repair or adjustment.
- Use only recommended accessories. Accessory attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
- Keep the cord safe. Do not let it hang over the edge of a table or counter or touch hot surfaces, including the stove.
- Children. The appliance is not intended for use by children or by people with reduced physical, sensory or mental capabilities, or a lack of experience and knowledge. Supervise children closely, keep the appliance and cord out of their reach, and make sure they do not play with it.
- Polarized plug (North American models). One blade is wider than the other, and the plug fits a polarized outlet only one way. If it does not fit fully, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug. If the plug fits loosely or the outlet feels warm, do not use that outlet.
Before First Use
When unpacking and removing packing material, handle the chopping blade and slice/shred discs carefully because they are very sharp. Wash all parts except the base in hot, soapy water before using them. These parts can also go in the dishwasher. See Care and Cleaning below for the correct way to take the unit apart and clean it.
Set the base on a flat, dry and clean surface before you begin processing.
What this food processor will not do
Do not try to chop ice in this food processor. It will damage the bowl and dull the blade. The unit will not whip cream, beat egg whites, or grind coffee beans, spices or other items with high oil content. It will not slice or shred hard-cooked eggs, marshmallows or soft cheeses. A food processor is also not recommended for Italian meringue, which is made with hot sugar syrup.
Assembling the Bowl and Cover
Warning: Make sure the unit is unplugged before putting on or taking off any parts.
How to assemble the bowl
- Put the bowl on top of the food processor base with the work bowl handle to the right.
- Turn the bowl clockwise until it clicks into place. The handle should now be to the right of the control panel.
- Select the attachment you need and assemble it as directed in the chopping, kneading or slicing/shredding sections. Place food or dough in the bowl if you are using the multipurpose blade or the dough blade.
There is only one position in which the bowl locks onto the base. The unit will not operate if the bowl is not locked onto the base.
How to lock the cover
- Align the line on the lid with the unlock symbol on the work bowl.
- Turn the lid clockwise until the line aligns with the lock symbol.
Removing the bowl and cover
To remove the lid, twist it counter-clockwise. To remove the bowl, turn it counter-clockwise toward the UNLOCK mark and lift it off.
Basic Operation
The processor has an interlock system. It will not operate unless the bowl is properly locked onto the base and the cover is properly locked onto the bowl. Do not try to operate the unit without the bowl lid, bowl and food chute correctly in place.
- Turn it on. After assembly, press the ON/OFF button. Then select the function you want.
- Use PULSE for texture control. Press and release PULSE to quickly turn the processor on and off, check the results and control the consistency. For longer processing, keep pressing PULSE.
- Use LOW or HIGH with the pusher. Add ingredients through the feed tube. Remove the pusher and fill the tube as directed in the slicing and shredding section. Insert the pusher and press the speed you want, and the motor starts. Press the pusher firmly down until all ingredients have passed into the work bowl. Remove the pusher and refill as needed. Press LOW or HIGH again when finished.
- Turn it off. Press OFF between jobs to stop the food processor. When the appliance is not in use, always unplug it.
Process liquids at low speed. Do not operate on high when liquids are at the max fill line.
How to Chop
Caution: Make sure the unit is turned OFF and unplugged before use. Never use your hand to push food into the processor. Do not use the processor continuously for more than 3 minutes at a time.
The multipurpose blade is for chopping, mixing, blending, pureeing and preparing puff pastry, crumbs and short crust pastry. The chopping blade is very sharp, so use caution when handling it.
- Lock the bowl onto the base.
- Slide the disc stem onto the center post. Then hold the multipurpose blade by its stem and slide it over the disc stem.
- Place food into the bowl.
- Lock the cover onto the bowl.
- Place the food pusher into the feed tube.
- Plug the cord into an electric outlet. Use the Chopping Guide below to prepare food for chopping.
- Press the ON/OFF button.
- Press HIGH, LOW or PULSE. When using PULSE, hold the button down for about 2–3 seconds at a time, check the results and repeat if desired.
- When finished, press LOW or HIGH again and let the chopping blade stop rotating.
- Twist the cover counter-clockwise to remove the lid.
- Hold the disc stem with the multipurpose blade attached by its stem and remove them. Unlock the bowl by turning it counter-clockwise toward the UNLOCK mark, and lift it off. Empty the processed food.
How to Knead Dough
Note: Never try to process dough that is too stiff to knead comfortably by hand.
Caution: Make sure the unit is turned OFF and unplugged before use. Never use your hand to push food into the processor. Mix no more than 3¼ cups of flour and 225 ml of water in one batch. Do not use the processor continuously for more than 3 minutes at a time, and let it rest before continuing.
The dough blade is for kneading bread dough and mixing batters and cake mixtures. It is sharp, so handle it with care.
- Lock the bowl onto the base.
- Slide the disc stem onto the center post. Then hold the dough blade by its stem and slide it over the disc stem.
- Place all the dry ingredients into the bowl.
- Lock the cover onto the bowl.
- Plug the cord into an electric outlet.
- Press the ON/OFF button.
- Press LOW or HIGH for continuous processing, or PULSE for short processing tasks. When using PULSE, hold the button down for about 2–3 seconds at a time, check the results and repeat if desired.
- When finished, press LOW or HIGH again and let the dough blade stop rotating.
- Twist the cover counter-clockwise to remove the lid.
- Hold the disc stem with the dough blade attached by its stem and remove them. Unlock the bowl by turning it counter-clockwise toward the UNLOCK mark, and lift it off. Empty the processed food.
Add all liquid ingredients through the food chute while the unit is processing, in a slow, steady stream for even distribution. Add enough liquid to make the dough soft enough to knead. Kneading dough that is too stiff can strain the machine.
How to Slice or Shred
The reversible slicing and shredding disc is for slicing and shredding meats, fruits, vegetables, cheeses and more. The disc blades are extremely sharp.
- Lock the bowl onto the base.
- Slide the disc stem onto the center post of the base. With the side you want facing up (slicing or shredding), push the slice/shred disc onto the disc stem.
- Lock the cover onto the bowl.
- Plug the cord into an electric outlet. Turn the machine on by pressing the ON/OFF button, then press LOW or HIGH to start.
- Put ingredients in the feed tube and press the food pusher lightly onto the ingredients.
- When finished, press LOW or HIGH again and let the disc stop rotating. Twist the cover counter-clockwise to remove the lid.
- Carefully remove the shredding disc. Unlock the bowl by turning it counter-clockwise toward the UNLOCK mark and lift it off. Empty the processed food.
Use gentle force on the food pusher. Excessive force could damage the disc.
- Press the ingredients down slowly and steadily with the pusher.
- When necessary, precut large chunks of food to fit the size of the feed tube.
- For best results, fill the feed tube evenly.
- When processing large quantities, process small batches at a time and empty the bowl between batches.
Capacity, Timing and Helpful Hints
Capacity and liquids
- Do not overfill the bowl. Fill it no more than 1/3 to 1/2 full when chopping. The bowl can hold up to 10 cups of dry ingredients or 2 cups of liquid.
- Process small amounts of liquid, 2 cups or less at a time. Larger amounts may leak from the bowl.
- Hot liquids (less than 176°F) and hot foods can be processed in the bowl.
Timing and rest
- Most foods can be processed in 10 to 30 seconds, depending on the quantity.
- For large quantities, process in several batches and let the processor rest about 1 minute between batches.
Food preparation tips
- Never try to process any food that cannot be cut with a sharp knife.
- To mince garlic, fresh herbs or small quantities of food, add them to the feed tube with the multipurpose blade in place and the processor running. Make sure the bowl and all parts are very dry before processing garlic or fresh herbs.
- To chop nuts, use the multipurpose blade and the pulse setting with short pulses. Process smaller batches for a coarser texture.
- Let hard cheeses, such as Parmesan and Romano, come to room temperature before processing. Freeze soft cheeses, such as cheddar and mozzarella, for 10 to 15 minutes before processing.
- Make sure uncooked meats and poultry are very cold before processing.
- Position the slicing and shredding discs so the cutting surfaces are to the right of the feed tube. This allows one full rotation of the blade before it contacts food.
- When processing several slices or pieces of food, put as many pieces as will fit in the feed tube together so they hold each other in place.
- This food processor is not designed to grind coffee beans or spices or crush ice.
Food Preparation Guides
Chopping guide (multipurpose blade)
| Food | Amount | Directions |
|---|---|---|
| Baby food | Up to 4 cups (1000 ml) | Add up to 4 cups (1000 ml) cooked vegetables and/or meat to the bowl with ¼ cup (60 ml) liquid per cup of solid food. Process continuously to the desired fineness. |
| Bread crumbs | Up to 5 slices | Cut fresh or dry bread slices into 1½–2 inch (3.75–5 cm) pieces. Add to the bowl and process to fine crumbs. |
| Cookie/cracker crumbs | Up to 5 cups (1250 ml) | For graham crackers, chocolate or vanilla wafers. Break larger crackers into 1½–2 inch (3.75–5 cm) pieces. Add to the bowl and process until fine. |
| Cranberries, minced | 3 cups (750 ml) | Pulse to chop to the desired fineness. Sugar can be added to make cranberry relish. |
| Eggs, chopped | Up to 12 | Peel, dry and halve hard-cooked eggs. Add to the bowl and pulse to chop, checking fineness after 4–5 pulses. |
| Garlic, minced | Up to 12 | Be sure the bowl is dry. Drop the clove(s) down the food chute while the unit is running. |
| Meat, chopped (raw or cooked) | Up to 2.5 cups (600 ml) | Cut the meat into 1 inch (2.54 cm) cubes. Add to the bowl and pulse to chop. |
| Mushrooms, chopped | Up to 12 medium | Halve large ones and add to the bowl. Pulse to the desired fineness. |
| Nuts, chopped | 2 cups | Add to the bowl and pulse to chop. |
| Onions, chopped | Up to 2 large | Quarter and add to the bowl. Pulse 1 or 2 times to chop coarsely. For green onions, use up to 2 cups (500 ml) cut into 1 inch pieces. |
| Parmesan or Romano cheese, grated | Up to 1½ cups (375 ml) | Allow the cheese to reach room temperature. Cut into 1 inch (2.54 cm) cubes. Add to the bowl and pulse to a coarse chop. Process continuously to grate finely. |
| Parsley, chopped | Up to 2 cups (500 ml) | Add to the bowl and pulse to the desired fineness, about 10–15 seconds. Process other herbs (basil, cilantro, mint and so on) the same way. |
| Pepper (green, red, yellow), chopped | Up to 1 pepper | Cut into 1 inch (2.54 cm) pieces. Add to the bowl and pulse to chop. |
| Soups, pureed or creamed | 2 cups (500 ml) | Add up to 2 cups of hot (less than 176°F) vegetable soup for pureeing or creaming. Process to the desired smoothness. |
| Squash (butternut), pumpkin or sweet potatoes, pureed | Up to 5 cups (1250 ml) of 1 inch (2.54 cm) cubes | Add ¼ cup (60 ml) of cooking liquid per cup of food. Pulse to chop finely, then process continuously to puree. |
| Strawberries, pureed | 2 cups (500 ml) | Hull and halve large berries. Add to the bowl and pulse to chop. Process continuously to puree. |
| Tomatoes, chopped | 4 medium | Quarter the tomatoes. Add up to 4 and pulse to the desired size. |
Shredding guide (shredding side of the disc)
| Food | Directions |
|---|---|
| Cabbage | Use the shredding disc for very fine cabbage or slaw. Cut into pieces to fit the chute. Shred using light pressure. Empty the bowl as cabbage reaches the disc. |
| Carrots | Position in the chute and shred. |
| Cheese, cheddar | Cheese must be well chilled. Cut to fit the chute and use light pressure. |
| Cheese, mozzarella | Cut to fit the chute. Chill in the freezer for 30 minutes before shredding. Use light pressure. |
| Potatoes | Cut to fit the chute. |
| Zucchini | Slice off the ends and cut to fit the chute, either lengthwise or horizontally. |
Slicing guide (slicing side of the disc)
| Food | Directions |
|---|---|
| Apple | Halve and stack horizontally in the chute. Use firm pressure. |
| Cabbage/lettuce | Halve the head and cut to fit the chute. |
| Carrots | Cut to fit the chute. |
| Celery | Remove the string and pack the chute for best results. |
| Cucumber | Cut to fit the chute if necessary. |
| Mushrooms | Stack the chute with mushrooms on their sides for lengthwise slices. |
| Onions | Halve and fill the chute, positioning onions upright for coarsely chopped results. |
| Peaches/pears | Halve and core. Position upright in the chute and slice using light pressure. |
| Peppers (green, yellow, red and so on) | Halve and seed. Fit the pepper up the bottom of the chute, squeezing slightly to fit if necessary. Cut large ones into quarters or strips, depending on the results you want. Slice using moderate pressure. |
| Pepperoni | Cut into 3 inch (8 cm) lengths. Remove the inedible casing. |
| Potatoes | Peel if desired. Cut large potatoes in halves and position them in the chute. |
| Strawberries | Hull. Arrange berries on their sides for lengthwise slices. |
| Tomatoes | Use small tomatoes for whole slices and halve if necessary. Use gentle but firm pressure. |
| Turnips | Peel and cut to fit the chute. |
| Zucchini | Slice off the ends. Use small squash for whole slices and halve larger ones to fit the chute. |
Kneading guide (dough blade)
| Food | Directions |
|---|---|
| Bread dough | 4 cups flour (32 ounces), yielding two 1-pound loaves |
| Pizza dough | 3 cups flour (26 ounces), yielding three 12-inch pizzas |
| Cake batter | 1 box 18.5 oz. cake mix, batter for three 8-inch layers |
| Cookie dough | Dough for about 50 cookies (2 pounds) |
The bread dough entry above lists 4 cups of flour. The kneading instructions recommend no more than 3¼ cups of flour and 225 ml of water in one batch, so stay within that batch limit when the two figures differ.
Care and Cleaning
Do not try to sharpen the cutting edges of the chopping blade or the reversible disc. They are permanently sharpened at the factory and will be ruined by attempted sharpening.
How to clean
- Before cleaning, make sure the unit is switched off and the cord is unplugged.
- Whenever possible, rinse parts right after processing for easy cleanup.
- Wipe the base, control panel and feet with a damp cloth and dry thoroughly. Stubborn spots can be removed by rubbing with a damp cloth and a mild, non-abrasive cleaner. Caution: Do not immerse the base in liquid.
- Wash all removable parts by hand or in a dishwasher, top rack only. Caution: Blades are sharp, so handle them carefully.
- By hand: wash in hot, sudsy water, rinse and dry thoroughly. If necessary, use a small nylon bristle brush to clean the bowl and the food chute/cover. This type of brush also helps keep you from cutting yourself on the sharp chopping blade and slice/shred disc.
- In a dishwasher: place removable parts on the top rack only, not in or near the utensil basket.
- Do not use rough scouring pads or cleansers on any plastic or metal parts.
- Do not fill the bowl with boiling water or place any of the parts in boiling water.
Removing stains
Some foods, such as carrots, may temporarily stain the bowl. To remove stains, make a paste of 2 tablespoons (30 ml) baking soda and 1 tablespoon (15 ml) warm water. Apply the paste to the stains and rub with a cloth. Rinse with sudsy water and dry.
Servicing
This appliance has no user-serviceable parts. Any servicing beyond the cleaning described above should be performed only by an Authorized Service Representative. See the warranty section.
Troubleshooting
These are the situations with a documented action.
| Situation | What to do |
|---|---|
| The unit will not run | Check that the bowl is locked onto the base, the cover is locked onto the bowl, and the bowl lid, bowl and food chute are correctly in place. Then press ON/OFF and select a function. |
| The food processor suddenly stops running | Turn the unit OFF and unplug it. Let it cool down for 15 minutes, then restart. |
| Liquid leaks from the bowl | Process 2 cups of liquid or less at a time. Larger amounts may leak. |
| Carrots or other foods stain the bowl | Use the baking soda paste described under Removing stains. |
Warranty and Support
Sunbeam Products, Inc. provides a 1 Year Limited Warranty. For one year from the date of purchase, the product is warranted to be free from defects in material and workmanship. Sunbeam will, at its option, repair or replace the product or any defective component during the warranty period. The warranty is valid for the original retail purchaser, is not transferable, and requires proof of purchase, so keep the original sales receipt.
It does not cover normal wear of parts or damage from negligent use or misuse, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an authorized Sunbeam service center, or acts of God such as fire, flood, hurricanes and tornadoes. Do not try to repair or adjust any electrical or mechanical functions on this product, because doing so will void the warranty.
In the U.S.A., call Sunbeam Consumer Service at 1.800.334.0759 with product questions or to obtain warranty service, and a convenient service center address will be provided. Product information is also listed at www.oster.com. Do not return the product to the Sunbeam address or to the place of purchase.
Frequently Asked Questions
Why won’t my Oster FPSTFPMP-TS food processor start?
The most common reason is that the interlock system has not detected a fully assembled unit. The processor will not run unless the bowl is locked onto the base, the cover is locked onto the bowl, and the bowl lid, bowl and food chute are correctly in place. Remove the cover and bowl, then reassemble them. The bowl locks in only one position, with its handle to the right of the control panel. Make sure the cord is plugged in, press the ON/OFF button, and then press LOW, HIGH or PULSE. Also keep food away from the touch panel, because it is sensitive to accidental food and body contact.
How do I assemble the bowl and lock the cover?
Unplug the unit first. Set the bowl on the base with the handle to the right and turn it clockwise until it clicks. Add the blade or disc you need, plus the food if you are using the multipurpose or dough blade. Then line up the mark on the lid with the unlock symbol on the bowl and turn the lid clockwise until the mark meets the lock symbol. To take it apart, twist the lid counter-clockwise, remove the blade or disc, and turn the bowl counter-clockwise toward the UNLOCK mark before lifting it off.
What do the ON/OFF, LOW, HIGH and PULSE buttons do?
ON/OFF powers the unit up once it is fully assembled, and pressing OFF between jobs stops the processor. LOW and HIGH run the motor continuously at the speed you choose, and you press the same button again to stop. PULSE runs the motor only while you hold it, which is useful for checking the texture as you go. When pulsing, hold the button for about 2–3 seconds at a time, look at the results and repeat if needed. Use LOW for liquids, and avoid HIGH when liquid is at the max fill line.
How long can I run the food processor at one time?
Do not run it continuously for more than 3 minutes at a time. For chopping and kneading, let the unit rest before you continue. Most foods are done in 10 to 30 seconds, depending on the amount. For large quantities, work in several batches and let the processor rest about 1 minute between them.
What should I do if my food processor suddenly stops running?
Turn the unit OFF and unplug it. Let it cool down for 15 minutes, then plug it in and restart. If the cord or plug is damaged, or the appliance malfunctions or is damaged in any way, stop using it and contact Sunbeam Consumer Service at 1.800.334.0759 rather than trying to repair it yourself.
How much dough can I knead in one batch?
Mix no more than 3¼ cups of flour and 225 ml of water in one batch. The dough also has to be soft enough to knead comfortably by hand, because dough that is too stiff can strain the machine. Add the dry ingredients to the bowl first. Then pour liquid through the food chute in a slow, steady stream while the unit is running. Stay within the 3-minute continuous-run limit and let the unit rest before continuing.
How full can I fill the bowl?
Never fill past the marked maximum fill line. When chopping, fill the bowl no more than 1/3 to 1/2 full. The bowl holds up to 10 cups of dry ingredients or 2 cups of liquid. For liquids, process 2 cups or less at a time, because larger amounts may leak from the bowl. Run liquids on LOW.
What can’t I do with this food processor?
Do not chop ice, because it will damage the bowl and dull the blade. The unit will not whip cream, beat egg whites, or grind coffee beans, spices or other items with high oil content. It also will not slice or shred hard-cooked eggs, marshmallows or soft cheeses. A food processor is not recommended for Italian meringue, and it should only be used for food that a sharp knife can cut.
Can I process hot foods or liquids?
Yes, hot liquids (less than 176°F) and hot foods can be processed in the bowl. Keep liquid amounts to 2 cups or less at a time so they do not leak. For pureeing or creaming soup, use up to 2 cups of hot vegetable soup that is below 176°F. Run liquids on LOW.
How do I slice or shred without damaging the disc?
Press down on the food pusher with gentle, slow, steady force, because excessive force could damage the disc. Position the disc with the side you want facing up, and set it so the cutting surfaces are to the right of the feed tube. Precut large pieces to fit the feed tube, fill the tube evenly, and pack several pieces together so they hold each other in place. For large quantities, work in small batches and empty the bowl between them.
Is the Oster FPSTFPMP-TS dishwasher safe, and how do I clean it?
All removable parts can be washed by hand or in a dishwasher, top rack only and not in or near the utensil basket. Never immerse the base in liquid. Wipe the base, control panel and feet with a damp cloth and dry them thoroughly. Do not use rough scouring pads or cleansers, and do not use boiling water on any part. Carrot stains on the bowl are usually temporary and can be removed with a paste of 2 tablespoons (30 ml) baking soda and 1 tablespoon (15 ml) warm water. Do not try to sharpen the chopping blade or disc, because they are permanently sharpened at the factory.
