Razer DeathAdder V4 Pro RZ01-0533

DeathAdder V4 Pro

Razer DeathAdder V4 Pro master guide: charging, HyperSpeed wireless setup, DPI stages, indicator colors, Synapse settings, safety and care.
Document type
Master Guide
Model number(s)
RZ01-0533
Language
English

Read the Master Guide (PDF)

Follow the manufacturer’s safety warnings and check your exact model before using these instructions.

Razer DeathAdder V4 Pro

The Razer DeathAdder V4 Pro is a wireless gaming mouse that connects to a computer through the included Razer HyperSpeed Wireless Gen-2 dongle or through a USB Type A to USB Type C cable. It uses Razer Optical Mouse Switches Gen-4, a Razer Optical Scroll Wheel and the Razer Focus Pro 45K Optical Sensor Gen-2. A single Power / DPI stage cycle button on the underside switches between five DPI stages (400, 800, 1600, 3200 and 6400), while a mouse status indicator and three dongle indicators report battery level, connection quality and polling rate. The Razer Synapse app adds button remapping, profiles, macros, sensor calibration and polling rate selection.

Parts and Controls

Mouse Components

LabelComponent
AMouse status indicator
BRazer Optical Mouse Switches Gen-4 (left mouse button and right mouse button)
CRazer Optical Scroll Wheel
DMouse button 5
EMouse button 4
FUSB Type C port
GPTFE mouse feet
HPower / DPI stage cycle button
IRazer Focus Pro 45K Optical Sensor Gen-2

Razer HyperSpeed Wireless Gen-2 Dongle

The dongle has a USB Type C port (J) and a dongle status indicator (K). The dongle status indicator reports connection quality, battery level and polling rate. Its LED colors can be customized in Razer Synapse.

What Is in the Box

  • Razer DeathAdder V4 Pro mouse
  • Razer HyperSpeed Wireless Gen-2 dongle
  • USB Type A to USB Type C cable
  • Razer mouse grip tape
  • Important Product Information Guide

Requirements

Product Requirements

A USB Type A port is required.

Razer Synapse Requirements

  • Windows 10 64-bit (or higher) or macOS 15 with Apple Silicon “M” series (or higher)
  • Internet connection for software installation

Charging and Battery Status

Charge the Mouse

  1. Connect the USB Type C end of the provided USB Type A to USB Type C cable to the mouse.
  2. Connect the USB Type A end to a USB Type A port on your computer.

For best results, connect the mouse directly to your computer’s USB port using the provided cable.

Battery Status Colors on the Mouse

The mouse status indicator shows the battery state with the following colors.

Charging Battery LevelStatus Indicator
FullStatic Green
HighBreathing Green
MidBreathing Yellow
LowBreathing Red
CriticalBlinking Red

Connecting to Your Computer

Wired Mode

Connect the mouse to a USB Type A port on your computer with the provided USB Type A to USB Type C cable.

Razer HyperSpeed Wireless Mode

  1. Connect the HyperSpeed Wireless Gen-2 dongle to a USB Type A port on your computer using the provided USB Type A to USB Type C cable.
  2. Press and hold the Power / DPI stage cycle button on the underside of the mouse for 2 seconds to power the mouse on.
  3. Watch the mouse status indicator. Blinking white means the mouse is connecting. Static white for 3 seconds means the mouse is connected.

Power and Dongle Indicators

Powering On

Press and hold the Power / DPI stage cycle button on the underside of the mouse for 2 seconds to power it on.

Dongle Status Indicator

The dongle has three small indicator LEDs. Reading left to right, they show connection quality, mouse battery level and polling rate.

Connection quality

Connection QualityStatus Indicator
ExcellentGreen
GoodYellow
WeakOrange
CriticalRed
DisconnectedOff

Mouse battery level

Mouse Battery LevelStatus Indicator
HighGreen
MidYellow
LowOrange
CriticalRed

Polling rate

Polling RateStatus Indicator
125HzViolet
500HzBlue
1000HzGreen
2000HzYellow
4000HzOrange
8000HzRed

DPI Stages

Press the Power / DPI stage cycle button to change the mouse’s DPI, or fine-tune your own sensitivity setting in the Razer Synapse app. The mouse status indicator briefly changes color to show which DPI stage is active.

DPIDesignated Color
400Red
800Green
1600 (default)Blue
3200Cyan
6400Yellow

The DPI stages, polling rate and dongle status indicator can be customized using Razer Synapse.

Configuring the Mouse with Razer Synapse

Install Razer Synapse when prompted, or download the installer from razer.com/synapse. Synapse requires an Internet connection to install, update, access and save cloud-based features, and registering for a Razer ID account is recommended but optional. Features depend on the current software version, connected devices and supported add-ons, so your screens may differ from the descriptions below.

Profiles, Hypershift and Dongle Lighting

On the DeathAdder V4 Pro tab you can change button assignments, stored profiles, DPI sensitivity, polling rate and lighting. Changes are saved automatically to your local system and cloud storage.

  • Profiles: A profile stores all of your Razer device settings. Use the profile’s Miscellaneous button to add, import, rename, duplicate, export or delete a profile. If your device supports on-board memory, the On-board Profiles button shows the remaining storage and lets you transfer or change the profiles saved on the device.
  • Hypershift mode: A secondary set of button assignments that is active while the Hypershift key is held down. By default the Hypershift key is the fn key of a Razer Synapse-supported keyboard, and you can also set any mouse button as the Hypershift key.
  • Dongle notifications: Customize the LED notifications on the HyperSpeed Wireless dongle while the mouse is in wireless mode.

Button Assignments

On the Customize subtab, select a button (or open the Remap Menu) and choose one of the following functions.

FunctionWhat it does
DefaultReturns the button to its original setting.
Keyboard FunctionChanges the button into a keyboard function. Turbo mode repeats the function while the button is held down.
Mouse FunctionSubstitutes another mouse function: Left Click, Right Click, Scroll Click, Double Click, Scroll Up, Scroll Down, Mouse Button 4 (“Backward” in most internet browsers), Mouse Button 5 (“Forward” in most internet browsers), Scroll Left or Scroll Right. Turbo mode is available on some of these functions.
SensitivitySensitivity Clutch, Sensitivity Stage Up, Sensitivity Stage Down, On-The-Fly Sensitivity, Cycle Up Sensitivity Stages and Cycle Down Sensitivity Stages.
MacroRuns a prerecorded sequence of keystrokes and button presses. Visible only when the Macro module is installed.
Inter-deviceChanges the functionality of other Razer Synapse-enabled devices, such as using a Razer gaming keyboard to change the sensitivity stage of the mouse.
Switch ProfileLoads another profile’s button assignments and shows an on-screen notification.
Switch Chroma EffectSwitches between Chroma Effect profiles in Chroma Studio. Visible only when the Chroma Studio module is installed.
Razer HypershiftActivates Hypershift mode while the button is held down.
Launch ProgramOpens an app or a website.
MultimediaVolume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All, Play / Pause, Previous Track and Next Track.
Windows ShortcutsAssigns a Windows shortcut command.
Text FunctionTypes prewritten text when the button is pressed, with full Unicode support.
DisableMakes the button unusable.

The Sensitivity Clutch changes sensitivity to a predefined DPI only while its button is held, then returns to the previous sensitivity on release. With On-The-Fly Sensitivity, you press the designated button and move the scroll wheel up or down to raise or lower the DPI.

Performance

  • Sensitivity: Create up to 5 sensitivity stages and cycle through them with the DPI cycle button or the DPI Stage Up and Down buttons. Hover over a stage to toggle it or to enable the Enable X-Y function for it.
  • Polling rate: Select a polling rate. A higher rate means the computer receives mouse status information more often, which reduces input latency and improves pointer responsiveness.
  • Sensitivity Matcher: Adjusts your mouse settings so it feels like a different mouse. A second mouse must be connected to use this feature.
  • Mouse Properties: Opens Windows Mouse Properties for operating system settings that affect the mouse.

Power

The Power subtab manages energy consumption while the mouse runs on its battery. You can also set the mouse to enter sleep mode after it has been idle for a certain amount of time.

Calibration

Calibration optimizes the sensor for your surface.

  • Smart Tracking: Sets the distance at which the sensor stops tracking when the mouse is lifted, which avoids unwanted cursor movement.
  • Enable Asymmetric Cut-Off: Lets you set different lift-off and landing distances. Test these distances thoroughly, because setting them too low may cause compatibility issues with the surface.
  • Tracking Distance: A slider that sets the vertical height at which the sensor stops tracking when the mouse is lifted.

Advanced

  • Dynamic sensitivity: Changes DPI automatically based on mouse speed. Presets are Classic (increases continuously with speed), Natural (increases gradually until it reaches a threshold), Jump (increases significantly during rapid movements) and Custom (a curve you create).
  • Rotation: Virtually tilts the sensor to compensate for the natural angle of your grip. Using the Mouse Rotation Calibration tool to find the best angle is recommended.

Macros, Exchange and Linked Games

  • Macro tab: Record keystrokes, button presses and cursor movements with the Record button, and end the session with the Stop button or the Shortcut Key. Recording options are Start Delay (1 to 5 seconds), Shortcut Key, Delay Settings and Mouse Movement Tracking. The Insert menu adds delays, keystrokes, button presses, macro groups, apps, commands, text and loops. The Key Binds subtab shows each macro’s shortcut keys and lets you assign a macro to a device button.
  • Exchange tab: Browse macros submitted through the Razer Workshop and other contributors, sorted by likes, downloads or most recent uploads. Downloaded macros appear under My Downloads.
  • Linked Games tab: Link an app to a peripheral and a profile, so the device switches to that profile automatically whenever the app launches. Add apps manually with the Add button or search for them with the Scan button.

Synapse Settings

The Settings tab includes Auto Launch (startup behavior), on-screen Notifications while full-screen apps run, Recommendations on the Dashboard, a Reset button that reactivates the tutorials, a transfer function for moving Profiles, Macros and Chroma Effects from Synapse 3 to the new Synapse, a choice of which app controls lighting effects, and the display language. The Feedback tab lets you send comments and report problems.

Safety Guidelines

  • If you have trouble operating the device and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com.
  • Do not take the device apart (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
  • Keep the device away from liquid, humidity or moisture.
  • Operate the device only within the temperature range of 0°C (32°F) to 40°C (104°F). If the temperature exceeds this range, unplug and/or switch off the device to let the temperature stabilize to an optimal level.
  • Avoid looking directly at the tracking beam or pointing it into anyone else’s eye. The beam is not visible to the naked human eye and is set to an Always-On mode.

Comfort

Long periods of repetitive motion, improper positioning of computer peripherals, incorrect body position and poor habits may be associated with physical discomfort and injury to nerves, tendons and muscles. Razer suggests the following.

  • Position your keyboard and monitor directly in front of you with the mouse next to the keyboard. Keep your elbows at your sides, not too far away, and the keyboard within easy reach.
  • Adjust the height of your chair and table so the keyboard and mouse are at or below elbow height.
  • Keep your feet well supported, posture straight and shoulders relaxed.
  • During gameplay, relax your wrist and keep it straight. If you repeat the same tasks, try not to bend, extend or twist your hands for long periods.
  • Do not rest your wrists on hard surfaces for long periods. Use a wrist rest.
  • Customize keyboard keys to suit your gaming style and minimize repetitive or awkward motions.
  • Do not sit in the same position all day. Get up, step away from your desk and stretch your arms, shoulders, neck and legs.

If you experience physical discomfort while using the mouse, such as pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back, consult a qualified medical doctor immediately.

Cleaning, Maintenance and Surface Use

Once a month, unplug the device from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.

Razer recommends a premium Razer mouse mat for the best movement and control. Some surfaces cause undue wear on the mouse feet, requiring constant care and eventual replacement. The sensor is tuned for Razer mouse mats and has been tested to read and track best on them.

Registration, Warranty and Support

The product carries a 2-year warranty badge in the guide. Register the product at razerid.razer.com/warranty. The latest Limited Product Warranty terms are at razer.com/warranty, and warranty is not valid outside the product’s intended region. The serial number location is shown on the underside of the mouse, near the rear PTFE foot. Support is available at support.razer.com.

Frequently Asked Questions

How do I charge the DeathAdder V4 Pro?

Plug the USB Type C end of the included USB Type A to USB Type C cable into the mouse and the USB Type A end into a USB Type A port on your computer. For best results, connect the mouse directly to the computer’s USB port instead of going through another device. The mouse status indicator turns static green when the battery is full.

What do the mouse status indicator colors mean for the battery?

While charging, static green means full, breathing green means high, breathing yellow means mid, breathing red means low, and blinking red means critical. On the dongle, the battery LED reports the mouse’s level as green for high, yellow for mid, orange for low and red for critical.

How do I turn the DeathAdder V4 Pro on?

Press and hold the Power / DPI stage cycle button on the underside of the mouse for 2 seconds. Steps for turning the mouse off are not documented in the Master Guide, so check support.razer.com if you need them.

How do I connect the mouse wirelessly with the HyperSpeed dongle?

Connect the dongle to a USB Type A port on your computer using the included cable, then hold the Power / DPI stage cycle button on the mouse for 2 seconds. While the mouse is connecting, the mouse status indicator blinks white. Once connected, it stays static white for 3 seconds.

How do I change the DPI?

Press the Power / DPI stage cycle button on the underside of the mouse to step through the stages. The status indicator briefly shows the active stage: red for 400, green for 800, blue for 1600 (the default), cyan for 3200 and yellow for 6400. For a custom value, set up to 5 sensitivity stages in the Performance subtab of Razer Synapse.

What do the three LEDs on the dongle show?

Reading left to right, they report connection quality, the mouse’s battery level and the polling rate. For connection quality, green is excellent, yellow is good, orange is weak, red is critical and off means disconnected. The dongle LED colors can be customized in Razer Synapse.

What polling rates does the mouse support, and how can I see the current one?

The dongle’s polling rate LED shows violet for 125Hz, blue for 500Hz, green for 1000Hz, yellow for 2000Hz, orange for 4000Hz and red for 8000Hz. You can select a polling rate in the Performance subtab of Razer Synapse. A higher rate sends mouse status to the computer more often, which reduces input latency and improves pointer responsiveness.

What do I need to run Razer Synapse?

You need Windows 10 64-bit (or higher) or macOS 15 with Apple Silicon “M” series (or higher), plus an Internet connection for installation. Install Synapse when prompted or download the installer from razer.com/synapse. A Razer ID account is recommended but optional.

How do I remap a button or set up Hypershift?

Open the DeathAdder V4 Pro tab in Razer Synapse, go to Customize, and select the button to change. Choose a function such as Keyboard Function, Mouse Function, Sensitivity, Multimedia or Disable. For Hypershift, assign Razer Hypershift to a mouse button, or use the keyboard’s fn key if it is a Synapse-supported Razer keyboard. Then set the secondary assignments, which stay active while the Hypershift key is held down.

How do I stop the cursor from moving when I lift the mouse?

In Razer Synapse, open the Calibration subtab and use Smart Tracking to set the Tracking Distance, which is the height at which the sensor stops tracking. Enable Asymmetric Cut-Off if you want separate lift-off and landing distances. Test these distances thoroughly, since setting them too low may cause compatibility issues with the surface.

How should I clean the DeathAdder V4 Pro?

Once a month, unplug the mouse from the computer and wipe it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents, and keep the mouse away from liquid, humidity and moisture.

Where is the serial number and how do I register for the warranty?

The serial number is on the underside of the mouse, near the rear PTFE foot. Register the product at razerid.razer.com/warranty. The latest warranty terms are available at razer.com/warranty, and the warranty is not valid outside the product’s intended region.

Follow the manufacturer’s safety warnings and check your exact model before using these instructions. Report an error.

Document information and editorial sourcing

The product instructions/information above in this page are based on the original manufacturer document.

Last updated: November 17, 2026

Find more product manuals in:

Related Razer Manuals