Razer Viper V3 Pro SE Gaming Mouse
The Razer Viper V3 Pro SE is a rechargeable gaming mouse built around the Razer™ Focus Pro 35K Optical Sensor Gen-2. It has five stock DPI stages (400, 800, 1600 by default, 3200 and 6400) and a single Power / DPI cycle button on the underside. It works in two ways. Wired mode uses the included USB Type A to Type C cable. Razer HyperSpeed Wireless (2.4 GHz) mode uses the included wireless dongle.
The mouse contains a Li-ion rechargeable battery. A depleted battery takes approximately 4 hours to charge fully, and the indicator LED shows charge level, low battery, and the active DPI stage. Razer Synapse (Windows 11 or higher) adds button remapping, stored profiles, sensitivity stages, polling rate, power settings, surface calibration, dynamic sensitivity curves, sensor rotation, macros, and game-linked profiles. This guide covers charging, both connection modes, daily use, every Synapse tab that applies to the mouse, and safety and care requirements.
What’s in the Box
Included items
- Razer Viper V3 Pro SE mouse
- Razer HyperSpeed Wireless dongle with a USB dongle adapter
- USB Type A to Type C cable
- Important product information guide
Mouse parts and controls
| Label | Part | Notes |
| A | Mouse indicator LED | Located on top, behind the scroll wheel area |
| B | Left mouse button | |
| C | Right mouse button | |
| D | Scroll wheel | |
| E | Mouse button 5 | Side button |
| F | Mouse button 4 | Side button |
| G | USB Type C port (mouse) | Used for charging and wired mode |
| H | PTFE mouse feet | Three pads on the underside |
| I | Power / DPI cycle button | Underside; the DPI stages can be customized in Razer Synapse |
| J | Razer™ Focus Pro 35K Optical Sensor Gen-2 | Underside |
Requirements and Registration
Product and software requirements
- Product: A USB Type A port.
- Razer Synapse: Windows® 11 (or higher), plus an internet connection for software installation.
Warranty registration and serial number
Register the product at razerid.razer.com/warranty. The serial number is on the underside of the mouse. The guide’s warranty badge shows a 2-year warranty. For the latest and current Limited Product Warranty terms, go to razer.com/warranty.
Charging and Connecting the Mouse
Charging the mouse
- Plug the USB Type A end of the cable into a USB port on your PC.
- Plug the USB Type C end into the Razer Viper V3 Pro SE.
- Let the mouse charge. For best results, fully charge it before first use. A depleted battery is fully charged in approximately 4 hours.
The indicator LED shows charging status. The color breathes while charging and turns static green at full charge.
| LED color | Meaning |
| Red (breathing) | Charging, at the low end (0%) |
| Orange (breathing) | Charging, mid-range |
| Yellow (breathing) | Charging, mid-range |
| Green (static) | Fully charged (100%) |
When prompted, install Razer Synapse, or download the installer from razer.com/synapse. Use it to personalize DPI settings, button configurations, polling rate, and other features.
Using wired mode
Connect the mouse to any USB port on your PC with the charging cable. The same cable charges the mouse and carries the wired connection.
Using Razer HyperSpeed Wireless (2.4 GHz) mode
- Connect the Razer HyperPolling Wireless Dongle to your PC. Plug it directly into a USB Type A port, or attach it to the USB dongle adapter and connect the adapter to a USB Type A port with the USB cable.
- Press and hold the Power / DPI cycle button for 2 seconds to power on the mouse.
The mouse is now ready for use in Razer HyperSpeed Wireless (2.4 GHz) mode.
Everyday Use
Powering the mouse on and off
Press and hold the Power / DPI cycle button for 2 seconds to power the mouse on or off.
Low battery notification
When the battery’s power is below 5%, the mouse indicator LED blinks red twice at repeated intervals. This sequence repeats until the battery is drained or you connect the mouse to a PC with the charging cable.
Changing DPI with the Power / DPI cycle button
Press the Power / DPI cycle button to change DPI. The indicator LED briefly changes color to show the active stage.
| DPI | LED color |
| 400 | Red |
| 800 | Green |
| 1600 (default) | Blue |
| 3200 | Cyan |
| 6400 | Yellow |
You can also set your own sensitivity values in Razer Synapse (see Performance Settings below).
Razer Synapse Overview
Razer Synapse is the software used to configure the mouse. The guide covers the new Razer Synapse app and notes that it may only partially cover some features. Razer Synapse needs an internet connection to install, update, access, and save cloud-based features. A Razer ID account is recommended but optional. Features are subject to change based on the current version, connected devices, and supported add-ons.
Navigation buttons
The Synapse tab is the default tab when you first launch the app.
| Button | Function |
| Minimize | Minimizes the app to the taskbar while it keeps running in the background |
| Maximize | Expands the window to fill the screen; click again to restore the original size |
| Close | Closes all relevant tabs and terminates the application completely |
| Previous Tab | Returns to the last tab you visited |
| Next Tab | Moves to the next page if you recently used Previous Tab |
| Refresh Tab | Reloads the current page, useful if a page isn’t displaying correctly or you want the latest content |
| Download Update | Appears when there are changes to the app |
| More | Opens a pop-up for the Devices, Modules, and Other Installed Apps tabs |
| Settings | Opens the Settings tab |
| Profile | Opens a pop-up with Log In, Feedback, Rate This Software, Add WiFi Device, and Exit |
| Info | Hover to see extra information about a feature or function |
Dashboard
The Dashboard subtab is an overview of Razer Synapse, with access to all your Razer devices, modules, and online services.
Gamer Room
The Gamer Room subtab shows all devices with the Razer Aether Light feature, where you can view and manage Gamer Room-supported devices. Synapse Override lets you select and customize a device’s lighting and make it react to Chroma-enabled games and Chroma Connect apps. Controlled By Gamer Room App lists supported devices controlled remotely by the Gamer Room app.
Devices & Modules
This subtab displays all installed modules and the modules available for installation.
Global Shortcuts
Global Shortcuts bind operations or Razer Synapse functions to custom key combinations from any Razer Synapse-enabled device input. They apply across all device profiles. Only Razer Synapse-enabled device inputs are recognized.
Customizing Buttons and Profiles
The Viper V3 Pro SE tab is the main tab for the mouse. From here you can change button assignments, stored profiles, DPI sensitivity, and polling rate. Changes under this tab are saved automatically to your local system and cloud storage.
Managing profiles
A profile is a data storage system that keeps all your Razer device settings. By default, the profile name is based on your system’s name.
- Click the Profiles dropdown bar to see all profiles for this device and switch between them.
- To add, import, rename, duplicate, export, or delete a profile, click the profile’s Miscellaneous button.
Standard and Hypershift modes
Hypershift mode is a secondary set of button assignments that activates while the Hypershift key is held down. By default, the Hypershift key is assigned to the fn key of a Razer Synapse-supported keyboard. You can also set any mouse button as a Hypershift key.
Dongle status indicator
Under Status Indicator, you can set the Razer HyperPolling Wireless Dongle to show either the mouse’s connection or battery status, or to show only battery warnings when the mouse needs charging.
Remapping a button
- Open the Customize subtab.
- Click the Remap Menu button to see all current assignments, or select a specific assignment directly on the Customize tab.
- Choose one of the functions described below.
Functions you can assign
| Function | What it does |
| Default | Returns the selected button to its original setting |
| Keyboard Function | Changes the button into a keyboard function; Turbo mode repeats the function while the button is held |
| Mouse Function | Substitutes another mouse function (listed below) |
| Sensitivity | Changes DPI with a button press (options below) |
| Macro | Runs a prerecorded sequence; visible only when the Macro module is installed |
| Inter-device | Changes the functions of other Razer Synapse-enabled devices, such as using a Razer keyboard to change the mouse’s sensitivity stage |
| Switch Profile | Loads a new set of button assignments; an on-screen notification appears when you switch |
| Switch Chroma Effect | Switches between Chroma Effect Profiles in Chroma Studio; visible only when the Chroma Studio module is installed |
| Razer Hypershift | Activates Hypershift mode while the button is held |
| Launch | Opens an app (search for it) or a website (type the address) |
| Multimedia | Assigns media and volume controls (listed below) |
| Windows Shortcuts | Assigns a Windows shortcut command; see support.microsoft.com/kb/126449 |
| Text Function | Types prewritten text when the button is pressed; supports full Unicode and special symbols from character maps |
| Disable | Makes the button unusable |
Mouse functions
Left Click, Right Click, Scroll Click (activates the universal scrolling function), Double Click (double left click), Scroll Up, Scroll Down, Mouse Button 4 (“Backward” in most internet browsers), Mouse Button 5 (“Forward” in most internet browsers), Scroll Left, and Scroll Right. Turbo mode, which repeatedly presses and releases the function while the button is held, is available for some mouse functions.
Sensitivity functions
| Option | Behavior |
| Sensitivity Clutch | Switches to a predefined DPI while the button is held; releasing returns to the previous sensitivity |
| Sensitivity Stage Up | Increases the sensitivity by one stage |
| Sensitivity Stage Down | Decreases the sensitivity by one stage |
| On-The-Fly Sensitivity | Press the designated button and move the scroll wheel up or down to raise or lower the current DPI |
| Cycle Up Sensitivity Stages | Raises the stage by one; after the highest stage, the next press returns to stage 1 |
| Cycle Down Sensitivity Stages | Lowers the stage by one; after stage 1, the next press goes to the highest stage |
Multimedia functions
Volume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All (microphone and audio output), Play / Pause, Previous Track, and Next Track.
Performance, Power, Calibration, and Advanced Settings
Sensitivity and sensitivity stages
The Performance subtab adjusts sensitivity, acceleration, and polling rate. Sensitivity is how far the cursor travels for a given mouse movement, so a higher DPI moves the cursor farther. A sensitivity stage is a preset sensitivity value. You can create up to 5 stages and cycle through them with the Power / DPI cycle button or with DPI Stage Up / Down buttons.
Sensitivity Matcher
Sensitivity Matcher calibrates the mouse to mimic the feel and movement of another mouse, for a seamless switch between mice. A second mouse is required.
Polling rate and Mouse Properties
Select your preferred polling rate. A higher polling rate means the computer receives information about the mouse’s status more often, which reduces input latency and improves pointer reaction time. The Mouse Properties link opens Windows Mouse Properties, where you can change operating system settings that affect the mouse.
Power settings
The Power subtab manages energy consumption while the mouse runs on its battery. You can also set the mouse to enter sleep mode after it has been idle for a certain amount of time.
Calibration and Smart Tracking
The Calibration subtab optimizes the sensor for your surface. Smart Tracking sets the distance at which the sensor stops tracking when the mouse is lifted, which prevents unwanted cursor movement. Use the Tracking Distance slider to set that vertical height. Selecting Enable Asymmetric Cut-Off lets you set different lift-off and landing distances. Test these distances thoroughly, because setting them too low may cause compatibility issues with the surface.
Dynamic Sensitivity
Dynamic Sensitivity adapts DPI and mouse input to your playstyle. Choose a curve preset or build your own.
| Preset | Behavior |
| Classic | Increases sensitivity with faster movements, like Windows mouse acceleration |
| Natural | Gradually boosts DPI for controlled, predictable actions in arena FPS games |
| Jump | Instantly shifts DPI from low to high during rapid swipes, suited to quick turns in tactical FPS games |
| Custom | Your own sensitivity curve |
Rotation
Rotation customizes the sensor angle to match your setup and grip style, for precise horizontal movement in-game.
Linking Games and Apps to Profiles
The Linked Games tab lets you add apps, view peripherals linked to apps, and search for listed apps.
Linking from the Games subtab
- Open the Games subtab. Apps appear here even if they aren’t linked to a Razer device. You can sort them alphabetically, by last played, or by most played.
- To add an app that isn’t listed, click the Add button to search manually, or the Scan button to search automatically. Use the Search button to find a specific game or program in the list.
- Click the app in the list and select a device and its profile.
The device switches to the selected profile whenever you launch the app.
Linking from the Devices subtab
- Open the Devices subtab and select your device to see its linked apps. You can filter them with the Views and Order dropdowns.
- To add an app, drag and drop its executable file into the box, or click the Add button to open the search window.
- In the search window, use Refresh to rescan installed apps, Search to find a specific game or program, or the Browse link to find the app manually.
- Click the tick box at the top left corner of the app.
The device then switches to the selected profile whenever you launch that app.
Creating and Assigning Macros
A macro is a set of recorded keystrokes, button presses, and cursor movements that you can bind to a device and run at any time.
My Macros
The My Macros subtab creates, edits, and organizes macros. The Macro Dropdown Bar lists the macros for the device. From it you can search, sort, create a new folder, and create a new macro. Selecting a macro enables options to rename, duplicate, or delete it. The Miscellaneous button opens options for the current macro, and the New Macro link creates and selects a new one quickly.
Recording a macro
- Create or select a macro.
- Optionally, click the dropdown menu button next to Record to set options before you start:
- Start Delay: a short delay of 1 to 5 seconds before recording starts.
- Shortcut Key: a key that starts a macro recording even when Razer Synapse is in the background.
- Delay Settings: the time between each command.
- Mouse Movement Tracking: turns on mouse movement recording and sets conditions for how it is recorded.
- Click Record and perform the keystrokes, button presses, and cursor movements.
- Click Stop, or press the Shortcut key, to end the session.
Editing a macro
Select any recorded command on the macro screen to edit it. Commands run in order from the top. The Insert menu on the left side adds delays, keystrokes and button presses, an entire macro group within the macro, app launches, commands, typed text, and loops of a set of commands.
Binding a macro to a button
The Key Binds subtab shows the Shortcut Keys for the selected macro. Click the Assign Macro To Your Devices button to bind the macro to a key or button without leaving the Macro tab. You can also assign a macro from the Customize subtab by setting a button’s function to Macro.
Synapse Settings and Feedback
Synapse settings
- Auto Launch: sets the app’s startup behavior.
- Notifications: lets the app show on-screen notifications even when you run full-screen apps.
- Recommendations: shows the latest products and features on your Dashboard based on your installed devices and linked games.
- Tutorials Reset: the Reset button reactivates all tutorials for Razer Synapse’s features.
- Synapse 3 Profile Migration: transfers your device’s Profiles, Macros, and Chroma Effects from Synapse 3 to the new Synapse.
- Device Lighting: chooses which app controls the lighting effects on your device.
General settings
The General subtab lets you change the display language of Razer Synapse. The About section shows the software version and copyright statement, links to Razer’s terms of use, and gives quick access to Razer’s social communities.
Feedback tab
Use the Feedback tab to send comments, suggestions, and problems with the software directly. You can also earn rewards for reporting bugs.
Safety, Comfort, and Care
Safety guidelines
- If you have trouble operating the device and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com.
- Keep the mouse’s accessories out of the reach of small children to avoid accidents and injuries.
- Don’t take apart the device, and don’t attempt to operate it under abnormal current loads. Doing so will void your warranty.
- Keep the device away from liquid, humidity, or moisture.
- Operate the device only within 0°C (32°F) to 40°C (104°F). If the temperature exceeds this range, unplug and/or switch off the device to bring the temperature back to an optimal level.
Comfort guidelines
Long periods of repetitive motion, improper positioning of peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. To help avoid injury:
- Place your keyboard and monitor directly in front of you with the mouse next to it. Keep your elbows at your sides, not too far away, and your keyboard within easy reach.
- Adjust your chair and table so the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, your posture straight, and your shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. If you repeat the same tasks with your hands, try not to bend, extend, or twist them for long periods.
- Don’t rest your wrists on hard surfaces for long periods. Use a wrist rest.
- Don’t sit in one position all day. Get up, step away from your desk, and stretch your arms, shoulders, neck, and legs.
If you feel pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck, or back, consult a qualified medical doctor immediately.
Cleaning and surface care
The mouse needs minimal maintenance. Once a month, unplug it from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Don’t use soap or harsh cleaning agents. Some surfaces cause undue wear on the feet, which then need constant care and eventual replacement. The sensor is tuned for Razer mouse mats and tracks best on them.
Battery warning
The mouse contains a Li-ion rechargeable battery, and battery life depends on usage. If you suspect the battery is drained, try charging it.
Caution: Don’t open, mutilate, or expose the battery to conducting materials (metal), moisture, liquid, fire, or heat. Doing so may cause batteries to leak or explode, resulting in personal injury.
Frequently Asked Questions
How do I turn the Razer Viper V3 Pro SE on or off?
Press and hold the Power / DPI cycle button on the underside for 2 seconds. The same 2-second hold powers the mouse on and off, so a quick press won’t do it. A quick press changes the DPI stage instead.
How long does it take to charge the mouse?
A depleted battery takes approximately 4 hours to charge fully. Plug the USB Type A to Type C cable into a PC USB port and the mouse. The LED breathes red, orange, and yellow as the charge builds and turns static green at 100%. Charge it fully before first use for best results.
How do I connect the mouse wirelessly?
Connect the Razer HyperPolling Wireless Dongle to your PC. Plug it into a USB Type A port directly, or use the USB dongle adapter with the cable. Then hold the Power / DPI cycle button for 2 seconds to power on the mouse. It is then ready in Razer HyperSpeed Wireless (2.4 GHz) mode.
How do I change the DPI?
Press the Power / DPI cycle button to step through the stock stages: 400 (Red), 800 (Green), 1600 (Blue, default), 3200 (Cyan), and 6400 (Yellow). The LED briefly shows the color of the active stage. To use other values, open the Performance subtab in Razer Synapse. You can create up to 5 sensitivity stages there.
What does the LED blinking red twice mean?
The battery is below 5%. The LED blinks red twice at repeated intervals until the battery drains or you connect the mouse to a PC with the charging cable. Plug in the cable to start charging.
Can I use the mouse while it’s plugged in?
Yes. Connecting the mouse to a PC USB port with the charging cable lets you use it in wired mode. The same cable charges the mouse.
What do I need to run Razer Synapse?
You need Windows® 11 (or higher) and an internet connection for the software installation. The app also needs an internet connection to update, access, and save cloud-based features. A Razer ID account is recommended but optional. Download the installer at razer.com/synapse.
How should I clean the mouse?
Unplug it from the computer once a month. Wipe it with a soft cloth or a cotton swab to prevent dirt buildup. Don’t use soap or harsh cleaning agents. Don’t take the mouse apart, because that voids the warranty. If troubleshooting doesn’t solve a problem, unplug the device and contact Razer through support.razer.com.
