Razer Viper 8KHz
The Razer Viper 8KHz is a wired, ambidextrous esports gaming mouse with a true 8000Hz (0.125 ms) polling rate, a Razer Focus+ 20K DPI optical sensor and Razer Optical Mouse Switches rated for 70 million clicks. It has 7+1 programmable buttons, five on-the-fly DPI stages (400, 800, 1600, 2400 and 3200 by default), Razer Chroma RGB lighting, and on-board memory for storing profiles. A Razer Speedflex cable connects it directly to a PC, and Razer Synapse lets you remap buttons, tune sensitivity and polling rate, set lighting and calibrate tracking for your mouse mat.
What’s in the Box and What You Need
Package contents
The box contains the Razer Viper 8KHz and an Important Product Information Guide.
Requirements
- Product: a direct USB connection to a PC.
- Razer Synapse: Windows 8 (64-bit) or higher, plus an internet connection for software installation.
Internet access is also required for updates and cloud-based features. Registering for a Razer ID account is recommended but optional.
Parts and Controls
| Label | Part |
| A | Razer Speedflex cable |
| B | Left mouse button |
| C | Right mouse button |
| D | Scroll wheel |
| E | Mouse button 5 |
| F | Mouse button 4 |
| G | Mouse button 7 |
| H | Mouse button 6 |
| I | Ultraslick mouse feet |
| J | Razer Focus+ 20K DPI Optical Sensor |
| K | DPI indicator |
| L | DPI cycle button |
The DPI indicator (K) and DPI cycle button (L) are on the underside of the mouse, near the rear.
Serial number and registration
The serial number is on a label on the underside of the mouse, above the sensor. The mouse comes with a 2-year limited warranty. You can register it at razerid.razer.com to access Razer benefits. For the latest warranty terms, go to razer.com/warranty. For questions, contact the Razer Support Team at support.razer.com.
Technical Specifications
| Item | Specification |
| Sensor | True 20,000 DPI Focus+ optical sensor |
| Tracking | Up to 650 inches per second (IPS) / 50 G acceleration / 99.6% resolution accuracy |
| Polling rate | True 8000Hz (0.125 ms) |
| Switches | Razer Optical Mouse Switches rated for 70 million clicks |
| Design | True ambidextrous, with integrated rubber side grips |
| Mouse feet | 100% PTFE |
| Scroll wheel | Gaming-grade tactile scroll wheel |
| Sensitivity | On-The-Fly Sensitivity Adjustment (default stages: 400/800/1600/2400/3200) |
| Memory | Hybrid cloud storage and on-board memory (4+1 profiles) |
| Lighting | Razer Chroma RGB, 16.8 million customizable color options |
| Buttons | 7+1 programmable buttons |
| Lift-off/landing | Advanced lift-off/landing distance customization |
| Software | Razer Synapse 3 enabled |
| Cable | 1.8 m / 6 ft Speedflex cable |
| Length | 126.73 mm / 4.99 in |
| Width | 57.6 mm / 2.27 in |
| Weight | 71 g / 2.5 oz (excluding cable) |
Setting Up Your Mouse
Connect the mouse
- Plug the mouse into a USB port on your computer.
- For the best polling rate, connect it directly to a USB 2.0 or USB 3.0 port. A USB hub, switch or extender may affect performance.
Install Razer Synapse
Install Razer Synapse when prompted, or download the installer from razer.com/synapse. All listed features are subject to change based on the current software version, connected devices, and supported apps and software.
Change your DPI
Press the DPI cycle button to step through your sensitivity stages. You can also fine-tune your own sensitivity in Razer Synapse.
DPI Stages and Indicator Colors
You can create up to 5 sensitivity stages and cycle through them with the DPI cycle button. The DPI indicator color shows which stage is active.
| Default DPI stage | Indicator color |
| 400 | Red |
| 800 | Green |
| 1600 (default) | Blue |
| 2400 | Cyan |
| 3200 | Yellow |
In Razer Synapse, the stage fields run from 100 to 20000 DPI. By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity value. To set different values for each axis, select Enable X-Y Sensitivity.
Using Razer Synapse
Razer Synapse has these main areas:
- Synapse tab: The default tab at launch. Its Dashboard subtab gives an overview of your Razer devices, modules and online services. The Modules subtab lists installed and available modules, such as Chroma Studio, Chroma Connect and Macro.
- Mouse tab: The main tab for this mouse, with Customize, Performance, Lighting and Calibration subtabs. Changes made here are saved automatically to your system and cloud storage.
- Profiles tab: Manages your profiles and links them to games and applications.
- Settings window: Opened with the gear button in Synapse.
Global Shortcuts
In the Synapse tab, Global Shortcuts lets you bind operations or Razer Synapse functions to custom key combinations. They apply across all device profiles. Only Razer Synapse-enabled device inputs are recognized.
Customizing Buttons
The Customize subtab is where you change button assignments. A profile stores all of your Razer peripheral’s settings. By default, the profile name is based on your system’s name. To add, rename, duplicate or delete a profile, press the Miscellaneous button. The Sidebar button shows all current button assignments. The Mouse Use option on this screen offers Left-handed and Right-handed layouts.
Button functions
After you select a button, you can change it to one of these functions:
| Function | What it does |
| Default | Returns the button to its original setting. |
| Keyboard Function | Assigns a keyboard function. Turbo mode repeats the function while the button is held. |
| Mouse Function | Substitutes another mouse function: Left Click, Right Click, Scroll Click, Double Click, Mouse Button 4 (“Backward” in most browsers), Mouse Button 5 (“Forward” in most browsers), Scroll Up, Scroll Down, Scroll Left or Scroll Right. Turbo mode is available for some of these. |
| Sensitivity | Changes DPI with a button (see below). |
| Macro | Runs a prerecorded sequence of keystrokes and button presses with precise timing. Visible only when the Macro module is installed. |
| Inter-device | Changes the functionality of other Razer Synapse-enabled devices, such as using a Razer gaming keyboard to change this mouse’s sensitivity stage. |
| Switch Profile | Loads a new set of button assignments. An on-screen notification appears when you switch. |
| Switch Lighting | Switches between advanced lighting effects. Visible only when the Chroma Studio module is installed. |
| Razer Hypershift | Activates Hypershift mode while the button is held. |
| Launch Program | Opens an app or website from the assigned button. |
| Multimedia | Volume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All, Play/Pause, Previous Track, Next Track. |
| Windows Shortcuts | Assigns a Windows operating system shortcut command. |
| Text Function | Types prewritten text with one press, with full Unicode support. |
| Disable | Makes the assigned button unusable. |
Sensitivity functions
- Sensitivity Clutch: changes to a predefined DPI while the button is held. Releasing it returns to the previous sensitivity.
- Sensitivity Stage Up / Down: increases or decreases the current sensitivity by one stage.
- On-The-Fly Sensitivity: press the designated button and move the scroll wheel up or down to increase or decrease the current DPI.
- Cycle Up Sensitivity Stages: raises the stage by one. At the highest stage, the next press returns to stage 1.
- Cycle Down Sensitivity Stages: lowers the stage by one. At stage 1, the next press goes to the highest stage.
Hypershift
Hypershift mode is a secondary set of button assignments that is active while the Hypershift key is held down. By default, the Hypershift key is the fn key of a Razer Synapse-supported keyboard, but you can assign any mouse button as the Hypershift key.
Stored Profiles and On-Board Memory
The mouse can store up to 5 profiles from Razer Synapse, so you can use them on systems without the app installed.
- In the Customize subtab, click the On-board Profiles button.
- Drag the profile you want onto your preferred on-board memory slot.
When using this feature, assign the Cycle Up Profile function to the same mouse button across all profiles. That lets you keep switching between all on-board profiles even when Razer Synapse is not present.
Performance Settings
The Performance subtab lets you adjust sensitivity, acceleration and polling rate.
- Sensitivity Stages: turn stages on, choose the number of stages, and set each stage’s DPI. Higher DPI makes the cursor travel farther for the same mouse movement.
- Polling Rate: a higher polling rate means the computer receives mouse status updates more often, which increases pointer reaction time. Choose from the available rates in the dropdown menu.
- Mouse Properties: opens Windows Mouse Properties, where operating system settings can directly affect this mouse.
Lighting
The Lighting subtab controls the mouse’s light settings.
Brightness and power saving
Toggle Brightness to turn lighting off, or use the slider to raise or lower brightness. Switch Off Lighting is a power-saving tool. It can turn off lighting when your display turns off, and/or after the mouse has been idle for a set number of minutes.
Quick effects
| Effect | Description | Setup |
| Audio meter | LEDs light up according to the audio level, with a default spectrum of colors. | Select a Color Boost level. |
| Breathing | Lighting fades in and out of the selected color(s). | Select up to 2 colors, or randomize colors. |
| Reactive | LEDs light up when you click any mouse button. | Select a color and a duration. |
| Spectrum cycling | Lighting cycles through 16.8 million colors indefinitely. | No further customization needed. |
| Static | LEDs stay lit in the selected color. | Select a color. |
If you have other supported Razer Chroma-enabled devices, click the Chroma Sync button to synchronize quick effects. Only devices that support the selected effect will synchronize. For advanced effects, press the Chroma Studio button to build your own Chroma Effect.
Calibration and Smart Tracking
The Calibration subtab optimizes the Razer Precision Sensor for your surface.
Smart Tracking
Smart Tracking sets the distance at which the sensor stops tracking when lifted from its surface, to avoid unwanted cursor movement. The Tracking Distance slider spans 1 mm to 3 mm. To set different lift-off and landing distances, select Enable Asymmetric Cut-Off.
Mouse mat surface calibration
To use surface calibration, click Add A Surface. You can choose from a list of Razer mouse mats or add your own.
Profiles Tab and Linked Games
In the Devices subtab, you can import profiles from your computer or the cloud with the import button, or create a new profile with the add button. To rename, duplicate, export or delete a profile, press the Miscellaneous button. Each profile can activate automatically when you run an application, using the Linked Games option.
The Linked Games subtab lets you add games, see which devices are linked to them, search for added games, and sort by alphabetical order, last played or most played. To link a game, click it in the list, then click Select a device and its profile to launch automatically during gameplay. Added games stay listed even if they are not linked to a Razer device.
Synapse Settings and Reset
The Settings window (gear button) has these tabs:
- General: change display language, start-up behavior, display theme and on-screen notifications. You can manually sync profiles to the cloud and view the master guides of connected Razer devices and installed modules.
- Reset: perform a factory reset on all connected Razer devices with on-board memory and/or reset Razer Synapse tutorials.
- About: shows software information, copyright and terms-of-use links, and checks for software updates.
Warning: Resetting a Razer device erases all profiles stored in that device’s on-board memory.
Safety and Maintenance
Safety guidelines
- If you have trouble operating the device and troubleshooting does not work, unplug it and contact the Razer hotline or go to support.razer.com.
- Do not take the device apart, and do not operate it under abnormal current loads. Doing so will void your warranty.
- Keep the device away from liquid, humidity and moisture.
- Operate it only between 0°C (32°F) and 40°C (104°F). If the temperature exceeds this range, unplug and/or switch off the device and let the temperature stabilize.
Cleaning and use
Once a month, unplug the mouse from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Some surfaces cause undue wear on the mouse feet, requiring constant care and eventual replacement. The sensor is tuned for Razer mouse mats, and Razer recommends a premium Razer mouse mat for the best movement and control.
Comfort
- Position your keyboard and monitor directly in front of you, with the mouse next to the keyboard.
- Keep your elbows at your sides, with the keyboard within easy reach.
- Set chair and table height so the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, posture straight and shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. Avoid bending, extending or twisting your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest.
- Do not sit in one position all day. Get up and stretch your arms, shoulders, neck and legs.
If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back while using the mouse, consult a qualified medical doctor immediately.
Frequently Asked Questions
What are the default DPI stages and what do the indicator colors mean?
The five default stages are 400 (red), 800 (green), 1600 (blue, the default), 2400 (cyan) and 3200 (yellow). The DPI indicator on the underside of the mouse shows the color of the stage you are using. You can change these values in Razer Synapse.
How do I change the DPI on the Razer Viper 8KHz?
Press the DPI cycle button on the underside of the mouse to step through your sensitivity stages. For a custom value, open Razer Synapse, go to Mouse > Performance, and edit the stage values. You can also assign a button to Sensitivity functions such as Stage Up, Stage Down, Clutch or On-The-Fly Sensitivity.
Which USB port should I use to get the full polling rate?
Plug the mouse directly into a USB 2.0 or USB 3.0 port on your computer. A USB hub, switch or extender may affect performance.
How do I change the polling rate?
Open Razer Synapse, go to Mouse > Performance, and choose a rate from the Polling Rate dropdown. A higher rate means the computer receives updates on the mouse’s status more often, which increases pointer reaction time. The mouse supports a true 8000Hz (0.125 ms) polling rate.
What do I need to use Razer Synapse with this mouse?
You need the mouse connected directly to a PC over USB, Windows 8 (64-bit) or higher, and an internet connection to install the software. Internet access is also needed for updates and cloud-based features. A Razer ID is recommended but optional. The installer is available at razer.com/synapse.
Can I use my profiles on a computer that doesn’t have Razer Synapse?
Yes, up to 5 profiles can be stored in the mouse’s on-board memory. In Synapse, open the Customize subtab, click On-board Profiles, and drag a profile onto a memory slot. Assign Cycle Up Profile to the same button in every profile so you can switch between stored profiles without Synapse.
How do I reassign a mouse button?
Open Razer Synapse, go to Mouse > Customize, and select the button you want to change. Then choose a function, such as a keyboard function, another mouse function, a macro, a profile switch, a multimedia control or Disable. Choose Default to restore the button’s original setting. Macro appears only when the Macro module is installed.
What is Hypershift mode and how do I use it?
Hypershift is a second set of button assignments that is active only while the Hypershift key is held down. By default, that key is the fn key of a Razer Synapse-supported keyboard. To use a mouse button instead, set that button’s function to Razer Hypershift in the Customize subtab, then hold it while pressing other buttons.
How do I turn off or dim the mouse lighting?
In Razer Synapse, go to Mouse > Lighting. Toggle Brightness to turn lighting off, or move the slider to adjust brightness. To save power automatically, use Switch Off Lighting to turn lighting off when your display turns off, when the mouse has been idle for a set number of minutes, or both.
How do I stop the cursor from moving when I lift the mouse?
Use Smart Tracking in Razer Synapse under Mouse > Calibration. Set the tracking distance, which ranges from 1 mm to 3 mm, to the lift-off height where you want the sensor to stop tracking. To set different lift-off and landing distances, select Enable Asymmetric Cut-Off.
What happens if I factory reset the mouse?
A factory reset erases all profiles stored in the mouse’s on-board memory. It is available in the Razer Synapse Settings window on the Reset tab, which can reset all connected Razer devices that have on-board memory. Make sure any profiles you want to keep are saved or synced first, since profiles in on-board memory will be gone after the reset.
How should I clean the mouse, and what temperatures is it rated for?
Once a month, unplug the mouse and wipe it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Keep it away from liquid, humidity and moisture, and use it only between 0°C (32°F) and 40°C (104°F). If it gets hotter than that, unplug or switch it off and let the temperature stabilize.
