Razer Cobra HyperSpeed RZ01-0557

Cobra HyperSpeed

Learn to charge, connect by wired, 2.4 GHz or Bluetooth, switch profiles, set DPI stages and care for the Razer Cobra HyperSpeed mouse.
Document type
Master Guide
Model number(s)
RZ01-0557
Language
English

Read the Master Guide (PDF)

Follow the manufacturer’s safety warnings and check your exact model before using these instructions.

Razer Cobra HyperSpeed

The Razer Cobra HyperSpeed is a mouse that connects three ways: by USB cable, through the included Razer HyperSpeed Wireless (2.4 GHz) dongle, or over Bluetooth. A slider switch on the underside selects between Bluetooth, power off and 2.4 GHz modes. It has Razer Optical Mouse Switches Gen-4, a Razer Focus X 26K Optical Sensor, five default DPI stages (400 to 6400) and 3-Zone Chroma underglow lighting. The mouse stores up to 5 profiles on board, so those profiles stay available on computers without Razer Synapse installed. Razer Synapse handles lighting, button assignments, macros, DPI stages and other settings.

Parts and Controls

The underside holds the slider switch, profile button, profile indicator and sensor. The top and side carry the buttons listed below.

LabelPartNotes
ARazer Optical Mouse Switches Gen-4Left and right mouse buttons
BRazer Optical Scroll Wheel
CMultifunction buttonPress: DPI Cycle Up. Hold: Invoke AI Prompt Master
DMouse button 5
EMouse button 4
FUSB Type C port
GUltraslick mouse feet
HProfile indicator
IRazer Focus X 26K Optical Sensor
JSlider switchBluetooth mode, Power off mode, or Razer HyperSpeed Wireless (2.4 GHz) mode
KProfile button
LWireless USB dongle compartment/cover puckThe cover puck can be swapped for the Razer Wireless Charging Puck for wireless charging via Razer Mouse Dock Pro (each sold separately)
M3-Zone Chroma underglow lighting

DPI Stages

The DPI stages are 400, 800, 1600 (default), 3200 and 6400. You can customize them in Razer Synapse.

What Is in the Box

  • Razer Cobra HyperSpeed mouse
  • Razer HyperSpeed Wireless dongle and USB dongle adapter
  • USB Type A to USB Type C cable
  • Important Product Information Guide

Requirements and Warranty

To use the mouse you need a USB Type A port or Bluetooth connectivity. Razer Synapse requires Windows 10 64-bit (or higher) and an internet connection for software installation.

The product carries a 2 year warranty. Register at razerid.razer.com/warranty. The serial number is on the underside of the mouse, at the location marked in the manual’s illustration. Current warranty terms are at razer.com/warranty.

Charging and Battery Notification

Charge the mouse by connecting the USB Type A to USB Type C cable between your computer’s USB port and the mouse’s USB Type C port. For best results, connect the mouse directly to a USB port on the computer with the provided cable. The charging illustration is marked 4H.

When the battery level is Critical, the Razer logo lighting blinks red.

Connecting the Mouse

Wired Mode

  1. Connect the USB Type A end of the cable to a USB port on your computer.
  2. Connect the USB Type C end to the mouse’s USB Type C port.

Razer HyperSpeed Wireless (2.4 GHz) Mode

  1. Connect the wireless USB dongle to a USB Type A port on your computer. The manual’s illustration also shows an alternative: put the dongle in the USB dongle adapter and connect the adapter to the computer with the USB cable.
  2. Slide the switch on the underside of the mouse to the 2.4 position.
  3. Wait for pairing. The logo lighting blinks while pairing and shows a Chroma effect once paired.

Bluetooth Mode

  1. Slide the switch on the underside of the mouse to the BT position.
  2. On your computer, open the Bluetooth settings and select Razer Cobra HyperSpeed.
  3. The logo lighting blinks blue while pairing and turns static blue when paired.

Reactivating Bluetooth Pairing Mode

  1. Slide the switch to the BT position.
  2. Press and hold the right mouse button, the middle mouse button and mouse button 5 for 3 seconds.
  3. On your computer, open the Bluetooth settings and select Razer Cobra HyperSpeed.
  4. The logo lighting blinks blue while pairing and turns static blue when paired.

Profiles and Profile Indicator Colors

The mouse stores up to 5 profiles from the Razer Synapse app. Each press of the profile button cycles to the next profile, and the profile indicator’s color shows which profile is selected.

ProfileDesignated color
Active ProfileWhite
Profile 1Red
Profile 2Green
Profile 3Blue
Profile 4Cyan

Install Razer Synapse when prompted, or download the installer from razer.com/synapse. Use it to customize lighting, configure the multifunction button and other buttons, and create profiles for different playstyles.

Configuring the Mouse in Razer Synapse

The manual describes the New Razer Synapse as an overview that may only partially cover your device’s features. The app needs an internet connection to install, update, access and save cloud-based features. A Razer ID account is recommended but optional. Features are subject to change with the software version, connected devices and supported add-ons.

Settings for this mouse are in the Cobra HyperSpeed tab. Changes made there are saved automatically to your local system and cloud storage. Its subtabs are Customize, Performance, Lighting, Power and Calibration.

Profiles and Hypershift

A profile stores all of your device settings. By default, the profile name is based on your system’s name. You can add, import, rename, duplicate, export or delete a profile from its Miscellaneous button.

Hypershift mode is a secondary set of button assignments that is active while the Hypershift key is held down. By default, the Hypershift key is the fn key of a Razer Synapse-supported keyboard, but you can set any mouse button as the Hypershift key.

Pairing Another Device to the Dongle

The mouse’s wireless USB dongle can support a keyboard and a mouse at the same time. To pair an additional HyperSpeed-compatible device with it, the Cobra HyperSpeed must be in HyperSpeed (2.4 GHz) wireless mode. Each peripheral can connect to only one dongle at a time.

Customizing Button Assignments

In the Customize subtab, select an assignment and change it to one of these functions:

  • Default: returns the button to its original setting.
  • Keyboard Function: assigns a keyboard function. You can enable Turbo mode to repeat it while the button is held.
  • Mouse Function: Left Click, Right Click, Scroll Click, Double Click, Scroll Up, Scroll Down, Mouse Button 4 (Backward in most browsers), Mouse Button 5 (Forward in most browsers), Scroll Left and Scroll Right. Turbo mode is available for some of these.
  • Sensitivity: Sensitivity Clutch, Sensitivity Stage Up, Sensitivity Stage Down, On-The-Fly Sensitivity, Cycle Up Sensitivity Stages and Cycle Down Sensitivity Stages.
  • Macro: runs a prerecorded sequence of keystrokes and button presses. It appears only when the Macro module is installed.
  • Inter-device: changes the functions of other Razer Synapse-enabled devices.
  • Switch Profile: switches profiles and shows an on-screen notification.
  • Switch Chroma Effect: switches between Chroma Effect Profiles in Chroma Studio. It appears only when the Chroma Studio module is installed.
  • Razer Hypershift: activates Hypershift mode while the button is held.
  • Launch: opens an app or website.
  • Multimedia: Volume Down, Volume Up, Mute Volume, Mic Volume Up, Mic Volume Down, Mute Mic, Mute All, Play / Pause, Previous Track and Next Track.
  • Windows Shortcuts: assigns a Windows shortcut command.
  • Text Function: types prewritten text, with full Unicode support.
  • Disable: makes the button unusable.

Performance Settings

  • Sensitivity stages: you can create up to 5 stages and cycle through them with the DPI cycle button or the DPI Stage Up/Down functions. You can toggle each stage or enable Enable X-Y for it.
  • Polling rate: select the rate you want. A higher polling rate means the computer receives mouse status updates more often, which reduces input latency.
  • Sensitivity Matcher: adjusts the mouse’s feel to match a different mouse. It requires a second mouse to be connected.
  • Windows Mouse Properties: a shortcut to the operating system settings that affect the mouse.

Lighting

You can turn the lighting off with the Brightness option or adjust brightness with the slider. A power-saving option can turn the lighting off when your display turns off, or power the device down after it has been idle for a set time. Indicator LEDs are not customizable.

Quick effectDescriptionSetup
Audio meterLights up according to the audio level with a default spectrum of colorsSelect a Color Boost level
BreathingFades the selected color(s) in and outSelect up to 2 colors or randomize
ReactiveLights up when you click any mouse buttonSelect a color and a duration
Spectrum cyclingCycles between 16.8 million colors indefinitelyNo further customization
StarlightEach LED has a chance of fading in and out at a random time and durationSelect up to 2 colors or randomize, and select a duration
StaticStays lit in the selected colorSelect a color
WaveScrolls in the selected directionSelect a wave direction

The Chroma Sync button synchronizes quick effects with other supported Razer Chroma-enabled devices. Advanced Effects lets you choose a Chroma Effect Profile, and the Launch Chroma Studio button lets you build your own. Some effects may not be available for your device.

Power and Calibration

The Power subtab manages energy use on battery and can set the mouse to enter sleep mode after it has been idle for a chosen number of minutes. It also has a Low Power Mode setting that applies when the mouse is wireless and the battery falls below a chosen percentage.

The Calibration subtab optimizes the sensor for your surface. Smart Tracking sets the vertical height at which the sensor stops tracking when you lift the mouse, which helps avoid unwanted cursor movement.

Linked Games and Macros

In the Linked Games tab, link an app to the mouse and a profile. The mouse then switches to that profile automatically whenever you launch the app. Add apps manually with the Add button or search for them automatically with the Scan button.

In the Macro tab, you can record keystrokes, button presses and cursor movements. Recording options include a Start Delay of 1 to 5 seconds, a Shortcut Key, Delay Settings and Mouse Movement Tracking. Assign a finished macro from the Key Binds subtab.

Safety, Comfort and Maintenance

Safety Guidelines

  • If the mouse does not operate properly and troubleshooting does not work, unplug it and contact the Razer hotline or go to support.razer.com.
  • Do not take the device apart, because this voids the warranty. Do not operate it under abnormal current loads.
  • Keep the device away from liquid, humidity and moisture.
  • Operate it only between 0°C (32°F) and 40°C (104°F). If the temperature goes outside this range, unplug and/or switch off the device so the temperature can stabilize.
  • Avoid looking directly at the tracking beam or pointing it at anyone’s eyes. The beam is not visible to the naked eye and is always on.

Comfort

Keep the keyboard and monitor directly in front of you with the mouse beside the keyboard, and keep the keyboard and mouse at or below elbow height. Keep your feet supported, posture straight and shoulders relaxed. Keep your wrist relaxed and straight during gameplay, avoid resting your wrists on hard surfaces for long periods, and take regular breaks. If you feel pain, numbness or tingling in your hands, wrists, elbows, shoulders, neck or back, consult a qualified medical doctor immediately.

Cleaning and Surface

Once a month, unplug the device from the computer and clean it with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Some surfaces wear the mouse feet and require constant care and eventual replacement. The sensor is tuned for Razer mouse mats, and a premium mouse mat is recommended.

Frequently Asked Questions

How do I charge the Razer Cobra HyperSpeed?

Connect the supplied USB Type A to USB Type C cable between the mouse’s USB Type C port and a USB port on your computer. For best results, plug it directly into the computer rather than into a hub or other intermediary. The charging illustration carries a 4H marking next to the charging symbol.

What does a blinking red logo mean?

A blinking red logo lighting indicates a Critical battery level. Connect the mouse to your computer with the USB cable to charge it.

How do I connect the mouse with the 2.4 GHz dongle?

Plug the wireless USB dongle into a USB Type A port on your computer, or into the supplied dongle adapter connected to the computer by the USB cable. Then slide the switch on the underside of the mouse to the 2.4 position. The logo lighting blinks while pairing and shows a Chroma effect when the mouse is paired.

How do I pair the mouse over Bluetooth?

Slide the underside switch to BT, then open the Bluetooth settings on your computer and select Razer Cobra HyperSpeed. Blinking blue lighting means the mouse is pairing, and static blue means it is paired.

How do I put the mouse back into Bluetooth pairing mode?

With the switch set to BT, press and hold the right mouse button, the middle mouse button and mouse button 5 together for 3 seconds. Then select Razer Cobra HyperSpeed in your computer’s Bluetooth settings. The logo blinks blue while pairing and turns static blue once paired.

What are the DPI stages, and which one is the default?

The default stages are 400, 800, 1600, 3200 and 6400, and 1600 is the default. Press the multifunction button on top of the mouse to cycle up through them. You can customize the stages in Razer Synapse, which allows up to 5 sensitivity stages.

How do I switch profiles, and what do the indicator colors mean?

Press the profile button on the underside of the mouse to cycle through your stored profiles. The profile indicator shows the selected profile: Profile 1 is red, Profile 2 is green, Profile 3 is blue and Profile 4 is cyan. The manual lists the active profile as white.

Can I use my profiles on a computer without Razer Synapse?

Yes. The mouse stores up to 5 profiles from Razer Synapse, so you can use them on systems that do not have the app installed. Create and edit the profiles in Synapse first, which requires Windows 10 64-bit (or higher) and an internet connection for installation. After that, the profile button switches between them on any computer.

What does the multifunction button do?

Pressing the multifunction button cycles the DPI up. Holding it invokes AI Prompt Master. You can also change how the button behaves in Razer Synapse.

Can I use one dongle for both a mouse and a keyboard?

Yes, the mouse’s wireless USB dongle can support a keyboard and a mouse at the same time, so you do not need a separate dongle for each. The extra device must be HyperSpeed-compatible, and the Cobra HyperSpeed must be in HyperSpeed (2.4 GHz) wireless mode when you pair it. A peripheral can connect to only one dongle at a time.

How should I clean the mouse?

Unplug the mouse from the computer once a month and wipe it with a soft cloth or a cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents. Keep it away from liquid, humidity and moisture.

What temperature range is safe for the mouse?

Operate the mouse only between 0°C (32°F) and 40°C (104°F). If the temperature goes outside that range, unplug or switch off the device and let it stabilize before you continue.

Follow the manufacturer’s safety warnings and check your exact model before using these instructions. Report an error.

Document information and editorial sourcing

The product instructions/information above in this page are based on the original manufacturer document.

Last updated: November 17, 2026

Find more product manuals in:

Related Razer Manuals