ThinkPad Z13 Gen 1

Lenovo ThinkPad Z13 Gen 1

The Lenovo ThinkPad Z13 Gen 1 is a notebook computer featuring an AMD-based platform, a 16:10 display, TrackPoint pointing stick, haptic touchpad, fingerprint reader, infrared camera, and USB4 Type-C connectivity. It supports Windows 10 and Windows 11, with selected configurations offering touchscreen input, cellular connectivity, and additional security features.

The laptop includes soldered LPDDR5 memory, M.2 solid-state storage, Dolby Atmos speaker technology, and Dolby Voice. It also offers intelligent cooling modes, biometric authentication, Lenovo Commercial Vantage, and UEFI BIOS configuration.

The ThinkPad Z13 Gen 1 supports wireless networking, Bluetooth accessories, external displays, USB-C charging, and optional 4G cellular connectivity. Its built-in security functions include fingerprint authentication, Windows Hello facial recognition, camera privacy control, and configurable firmware passwords.

Product Overview

The ThinkPad Z13 Gen 1 combines notebook computing functions with built-in pointing controls, biometric security, and power management settings.

The keyboard includes dedicated shortcuts for changing volume, adjusting display brightness, controlling the camera and microphone, and managing external displays.

The TrackPoint pointing device and haptic touchpad provide alternative ways to control the pointer. Selected configurations also support touchscreen gestures and compatible Lenovo digital pens.

Main Features

• 16:10 display with IPS or OLED technology, depending on configuration.
• Integrated infrared camera with privacy control.
• Fingerprint reader integrated into a keyboard key.
• TrackPoint pointing stick.
• Haptic touchpad.
• Optional multi-touch display.
• Dolby Atmos Speaker System.
• Dolby Voice.
• LPDDR5 onboard memory.
• M.2 solid-state storage.
• Two USB-C connections supporting USB4.
• Integrated wireless LAN and Bluetooth.
• Optional wireless WAN and nano-SIM support.
• Optional GPS on wireless WAN configurations.
• Windows Hello facial recognition.
• Lenovo Commercial Vantage.
• TrackPoint Quick Menu.
• Intelligent Cooling and Intelligent Cooling Boost.
• USB-C charging and rapid-charge support.
• UEFI BIOS security configuration.
• Optional Lenovo Mod Pen and Lenovo Precision Pen 2 support.
• User-replaceable M.2 SSD and selected other components.

Technical Specifications

Hardware Specifications

Display Specifications

The Z13 Gen 1 and Z16 Gen 1 product family includes IPS and selected OLED display configurations.

The combined guide identifies the following display resolutions across the two models:

Display resolution and available technologies depend on the specific model and configuration.

Storage Specifications

Power Specifications

USB Specifications

The ThinkPad Z13 Gen 1 has two USB-C connectors supporting USB4.

Higher refresh rates may limit maximum external display resolution.

Actual USB transfer performance varies with connected devices, system configuration, and operating conditions.

Operating Environment

Parts and Components

Front Components

Infrared Camera

The infrared camera supports Windows Hello facial recognition.

Press F9 to enable or disable the camera privacy function.

When the F9 privacy indicator is illuminated, the camera is disabled.

Fingerprint Reader

The fingerprint reader is built into a keyboard key.

It can be used for Windows sign-in and supported firmware authentication functions.

TrackPoint Pointing Stick

The TrackPoint is located between the keyboard keys.

It supports pointer movement, clicking, scrolling, and zooming.

Haptic Touchpad

The haptic touchpad provides conventional mouse controls through a pressure-sensitive surface.

Its lower areas support left- and right-click actions.

Microphones

The built-in microphones support voice input, communication, and audio recording.

Microphone settings can be adjusted through supported Lenovo software.

Side Ports and Connectors

The ThinkPad Z13 Gen 1 includes USB4, audio, power, and optional nano-SIM connections.

USB-C Power Connector

The USB-C power connector supports the computer’s compatible power adapter.

It can also connect supported USB-C accessories.

USB4 Connector

The USB4 connector supports compatible external devices and display adapters.

Audio Connector

The audio connector accepts a compatible headset or audio accessory.

Nano-SIM Card Tray

Selected configurations include a nano-SIM tray for cellular network access.

A compatible wireless WAN module and active carrier service are required.

Bottom Components

Stereo Speakers

The ThinkPad Z13 Gen 1 has speakers positioned along the underside of the computer.

The speakers are part of the Dolby Atmos audio system.

Emergency-Reset Hole

The emergency-reset hole is located on the underside of the laptop.

It allows the power supply to be temporarily disconnected when the computer becomes unresponsive.

Using the Emergency-Reset Hole

1. Disconnect the laptop from AC power.
2. Insert a straightened paper clip into the emergency-reset hole.
3. This temporarily disconnects the power supply.
4. Reconnect the AC adapter.
5. Press the Power button to start the computer.

Use this procedure when normal shutdown is unsuccessful.

Safety Instructions

Heat and Ventilation Safety

Place the computer on a hard, flat surface during operation.

Warning: Avoid prolonged direct skin contact with the bottom of the laptop.

The underside can become warm enough to cause discomfort or injury when held against bare skin for more than one minute.

Keep ventilation openings unobstructed.

Electrical Safety

• Use appropriate Lenovo-certified power adapters and power cords.
• Connect the computer to a compatible electrical supply.
• Disconnect power before supported internal component replacement.
• Follow the Lenovo Safety and Warranty Guide and Generic Safety and Compliance Notices.

Battery Safety

The ThinkPad Z13 Gen 1 contains a built-in rechargeable battery.

Important: Battery replacement must be performed by a Lenovo-authorized repair facility or technician.

Do not attempt to replace the built-in battery as a customer-replaceable component.

Liquid Spill Safety

If liquid is spilled on the laptop:

1. Disconnect the AC power adapter immediately.
2. Turn off the computer.
3. Do not attempt to drain the liquid by turning the laptop upside down.
4. Allow the computer to dry completely before turning it on.

Turning the computer off promptly helps reduce the risk of electrical damage.

Touchscreen Safety

For touchscreen configurations:

• Avoid applying excessive pressure.
• Do not use metallic objects on the display.
• Do not use fingernails, gloved fingers, or objects not intended for touchscreen input.
• Do not apply solvents when cleaning.
• Turn off the computer before cleaning the screen.

Internal Hardware Safety

Before replacing supported internal components:

1. Disable Windows Fast Startup.
2. Disable the built-in battery through UEFI BIOS.
3. Shut down and disconnect the computer from external power.
4. Allow the computer to cool.
5. Follow the relevant replacement procedure.

Before First Use

Connecting the Power Adapter

1. Locate the USB-C power connector.
2. Connect the compatible power adapter.
3. Connect the power cord to an appropriate electrical outlet.
4. Allow the battery to charge if necessary.
5. Press the Power button.

The computer supports rapid charging through the specified 65 W power adapter.

Starting Windows

Follow the Windows setup instructions displayed when the computer starts.

The computer supports Windows 10 or Windows 11 configurations covered by this guide.

Keyboard Shortcuts and Function Keys

The ThinkPad Z13 Gen 1 includes dedicated function keys and Fn key combinations for frequently used controls.

Function Key Guide

Additional Keyboard Shortcuts

Using Fn Lock

Press Fn + Esc to change the Fn Lock setting.

• Fn Lock indicator on: The F1–F12 keys perform their standard function-key actions.
• Fn Lock indicator off: The F1–F12 keys perform the special functions shown on the keys.

Adjusting Display Brightness

Use the F5 and F6 special functions to decrease or increase screen brightness.

Muting the Microphone

Use the F4 special function to mute or unmute the built-in microphones.

Controlling Camera Privacy

Press F9 to disable or enable the camera.

The illuminated privacy indicator shows that the camera is disabled.

Entering Sleep Mode

Press Fn + 4.

To wake the laptop, press Fn or the Power button.

Using the TrackPoint

The TrackPoint pointing device allows pointer movement, mouse clicks, scrolling, and zooming without using the touchpad.

Moving the Pointer

1. Place a finger on the TrackPoint’s nonslip cap.
2. Apply gentle pressure in the desired direction.
3. The pointer moves accordingly.

Increasing pressure makes the pointer move faster.

Left-Click and Right-Click

The TrackPoint button areas provide the same functions as conventional mouse buttons.

Scrolling

1. Press and hold the dotted middle button.
2. Apply pressure to the TrackPoint in the vertical or horizontal direction.
3. Move through the document, website, or application.

Zooming

Press and hold Ctrl + Middle Button while moving the TrackPoint pointing stick.

Disabling TrackPoint

1. Open the Start menu.
2. Select Settings > Devices > Mouse.
3. Follow the on-screen instructions to disable the TrackPoint.

Using the Haptic Touchpad

The haptic touchpad provides pointer movement, clicking, scrolling, and supported gestures.

Touchpad Controls

Some gestures depend on the application and the previous pointing-device action.

Disabling the Haptic Touchpad

1. Open the Start menu.
2. Select Settings > Devices > Touchpad.
3. Turn off the Touchpad setting.

Cleaning the Haptic Touchpad

If the touchpad becomes stained with oil:

1. Turn off the computer.
2. Use a soft, lint-free cloth.
3. Lightly moisten the cloth with lukewarm water or suitable computer cleaner.
4. Gently clean the surface.

Touchscreen Instructions

Selected ThinkPad Z13 Gen 1 configurations include multi-touch support.

Touchscreen Gestures

Cleaning the Touchscreen

1. Turn off the computer.
2. Use a dry, soft, lint-free cloth or absorbent cotton.
3. Gently remove dust and fingerprints.
4. Avoid solvents and excessive pressure.

Calibrate touch input periodically if necessary to maintain accuracy.

Connecting to Wi-Fi

The ThinkPad Z13 Gen 1 supports wireless LAN connections.

Wi-Fi Setup

1. Click the network icon in the Windows notification area.
2. Select the required wireless network.
3. Click Connect.
4. Enter the network credentials when requested.
5. Complete the connection.

The connection interface depends on whether Windows 10 or Windows 11 is installed.

Connecting to Wired Ethernet

A wired Ethernet connection requires a compatible Lenovo USB-C to Ethernet Adapter.

Ethernet Setup

1. Connect the USB-C Ethernet adapter to the laptop.
2. Connect the Ethernet cable to the adapter.
3. Connect the other end to the network.
4. Complete any required network configuration.

The adapter is included with selected configurations or available as an accessory.

Connecting to a Cellular Network

Selected ThinkPad Z13 Gen 1 models support 4G cellular connections.

Cellular connectivity requires:

• A compatible wireless WAN card.
• A nano-SIM card.
• An active cellular data plan.
• Supported carrier service.

Installing a Nano-SIM Card

1. Turn off the computer.
2. Locate the nano-SIM tray.
3. Insert a straightened paper clip into the tray release hole.
4. Remove the tray.
5. Insert the nano-SIM card in the correct orientation.
6. Reinsert the tray.
7. Turn on the computer.
8. Open the Windows network menu.
9. Select the cellular network.
10. Enter the required connection details.

Network availability and data speeds depend on the carrier, location, and signal conditions.

Using Airplane Mode

Airplane Mode disables the computer’s wireless communication functions.

Enabling Airplane Mode

1. Type Airplane mode in Windows Search.
2. Press Enter.
3. Turn on Airplane Mode.

The F8 special function can also be used to control Airplane Mode.

Connecting Bluetooth Devices

The ThinkPad Z13 Gen 1 supports Bluetooth communication with compatible accessories.

Bluetooth Setup

1. Open Windows Search.
2. Type Bluetooth.
3. Press Enter.
4. Turn on Bluetooth.
5. Select the device to connect.
6. Follow the pairing instructions.

For connection, place Bluetooth devices within approximately 10 meters (33 feet) of the computer.

Supported accessories include keyboards, mice, smartphones, and speakers.

Connecting an External Display

The USB-C connectors support compatible external display adapters and display devices.

Wired Display Connection

1. Connect the appropriate USB-C display adapter or cable.
2. Connect the external monitor or projector.
3. Turn on the display.
4. Use the external display keyboard shortcut to select the required display mode.

If Windows does not detect the monitor:

1. Right-click an empty area of the desktop.
2. Select Display Settings.
3. Follow the instructions to detect the display.

External Display Resolution

Higher refresh rates may require lower display resolutions.

Wireless Display Connection

A wireless display must support Miracast.

1. Press Windows + K.
2. Select the required wireless display.
3. Complete the connection.

Changing Display Settings

1. Right-click an empty area of the desktop.
2. Select Display Settings.
3. Choose the required display.
4. Adjust resolution, orientation, or main display settings.

Using the Lenovo Mod Pen

Selected configurations support the Lenovo Mod Pen for writing and drawing.

The Mod Pen is rechargeable and includes two barrel buttons.

Pen Controls

Charging the Lenovo Mod Pen

1. Remove the pen cap.
2. Connect the pen to the appropriate charging connection using the computer’s AC power adapter.
3. Allow the pen to charge.
4. Replace the cap, aligning it correctly.

Pen Battery Indicators

Charging takes approximately two hours.

A fully charged pen supports up to 14 days of battery standby time under the stated conditions.

Pen Maintenance

• Keep the pen away from water.
• Avoid moisture exposure.
• Do not subject the pen to shocks.
• Avoid excessive writing pressure.
• Store the pen in a dry, ventilated location.
• Avoid direct sunlight and major temperature changes.

Using the Lenovo Precision Pen 2

Selected configurations also support the Lenovo Precision Pen 2.

Pen Controls

Charging the Precision Pen 2

1. Remove the pen cap.
2. Connect the pen to a charger using a USB-C cable.
3. Allow the pen to charge.
4. Reinstall the pen cap.

The LED shows blinking amber for low battery, solid amber while charging, and solid white when fully charged.

A full charge takes approximately two hours.

Barrel button functions can be customized through Lenovo Pen Settings.

Lenovo Commercial Vantage

Lenovo Commercial Vantage provides settings, maintenance functions, diagnostics, and support information.

Opening Lenovo Vantage

1. Open Windows Search.
2. Type Lenovo Commercial Vantage.
3. Open the application.

Available Functions

• View device information and status.
• Configure hardware settings.
• Download BIOS and firmware updates.
• Install device drivers.
• Monitor computer health.
• Run hardware diagnostics.
• Check warranty status.
• Access product documentation.
• Temporarily disable input devices for cleaning.

Available functions depend on the installed software version and computer configuration.

TrackPoint Quick Menu

The TrackPoint Quick Menu provides convenient access to camera, microphone, dictation, and pointing-device settings.

Opening the Quick Menu

Double-tap the TrackPoint pointing stick.

The menu is enabled by default.

Press Fn + G to enable or disable the double-tap shortcut.

Quick Menu Functions

Microphone Modes

Selecting either mode automatically enables AI noise suppression when supported.

Smart Privacy and Productivity Features

Selected configurations include Glance by Mirametrix.

Glance uses camera-based detection to provide privacy, productivity, and wellness features.

Opening Glance

1. Open Windows Search.
2. Type Glance.
3. Press Enter.

Privacy Features

Press Alt + F2 to cancel supported blur effects.

Productivity Features

These features operate when compatible external displays are connected.

Digital Wellness Features

• Posture Check: Reminds users to correct a hunched posture.
• 20/20/20 Alert: Reminds users to look away from the screen for 20 seconds every 20 minutes.

Intelligent Cooling

Intelligent Cooling controls power consumption, cooling fan behavior, operating temperature, and performance.

The ThinkPad Z13 Gen 1 supports automatic and manually selected cooling modes.

Cooling Modes

Intelligent Cooling in Windows 10

1. Click the battery icon in the Windows notification area.
2. Use the power slider to select a mode.
3. Press Fn + T to enable or disable Auto Mode.

Intelligent Cooling in Windows 11

1. Right-click the battery icon in the taskbar.
2. Open the power and sleep settings.
3. Locate the Power section.
4. Select the required power mode.

Windows 11 includes:

• Best Power Efficiency.
• Balanced.
• Best Performance.

Press Fn + T to change Auto Mode.

When Auto Mode is active, Balanced is the recommended Windows 11 power setting.

Intelligent Cooling Boost

Intelligent Cooling Boost dynamically adjusts performance according to the applications being used.

It can be useful for communication applications such as Microsoft Teams.

The function requires Auto Mode and Balanced Mode.

Enabling Intelligent Cooling Boost

1. Restart the computer.
2. Press F1 at the Lenovo logo to enter UEFI BIOS.
3. Select Config > Power.
4. Find Intelligent Cooling Boost.
5. Enable the function.
6. Press F10 to save changes and exit.

Battery Charging and Power Management

Checking Battery Status

1. Open Windows Settings.
2. Select System.
3. View battery information.

Additional battery details are available in Lenovo Vantage.

Charging the Computer

Connect the specified USB-C power adapter when the battery charge becomes low.

The ThinkPad Z13 Gen 1 uses a 65 W power adapter.

The rapid-charge function can charge the battery to approximately 80% in one hour while the computer is turned off.

Charging time varies with operating conditions, battery temperature, and computer activity.

Charging Temperature

The recommended charging temperature is between 10°C and 35°C (50–95°F).

Battery Charging Behavior

The battery may not begin recharging immediately after a small decrease from a full charge.

Once fully charged, the battery must fall to approximately 94% or below before charging resumes.

Battery capacity behavior may also change after extended periods of limited use.

For battery maintenance, Lenovo provides additional guidance through the power section of Vantage.

USB-C Peer-to-Peer Charging

The Z13 Gen 1 supports Lenovo P-to-P 2.0 charging through its USB-C ports.

This feature allows supported computers to exchange power through compatible USB-C connections.

Enabling Charging in Battery Mode

1. Restart the computer.
2. Press F1 to enter UEFI BIOS.
3. Select Config > USB.
4. Enable Charge in Battery Mode.
5. Save the settings.

Charging can then operate in supported configurations even when the computer is turned off or hibernating.

Charging speed depends on battery levels, adapter power, and whether the computers are operating.

Power Settings

Default ENERGY STAR Power Plan

On applicable ENERGY STAR configurations:

Changing the Power Plan

1. Open Control Panel.
2. Select Large icons or Small icons.
3. Open Power Options.
4. Select or customize a power plan.

Changing Power Button Behavior

1. Open Control Panel.
2. Select Power Options.
3. Click Choose what the power buttons do.
4. Adjust the required settings.

Security Features

The ThinkPad Z13 Gen 1 provides biometric authentication, firmware protection, and supported storage security.

Security Features

Setting Up Fingerprint Authentication

1. Open Windows Search.
2. Type Sign-in options.
3. Press Enter.
4. Select Fingerprint Recognition.
5. Follow the instructions to register a fingerprint.
6. Use the fingerprint reader to sign in.

For more reliable recognition, place the finger near the center of the reader during registration.

Registering more than one fingerprint is recommended.

Fingerprint Reader Care

• Do not scratch the sensor.
• Avoid using dirty or wet fingers.
• Do not use an injured finger on the reader.

Setting Up Windows Hello Face Recognition

1. Confirm that the F9 camera privacy indicator is off.
2. Open Windows Search.
3. Type Sign-in options.
4. Select the face recognition setting.
5. Follow the instructions to register the face.

The infrared camera can then be used for Windows Hello sign-in.

UEFI BIOS Passwords

The ThinkPad Z13 Gen 1 supports several firmware password types.

Setting a BIOS Password

1. Restart the computer.
2. Press F1 at the Lenovo logo.
3. Select Security > Password.
4. Choose the password type.
5. Follow the on-screen instructions.

Store passwords securely.

Forgotten Power-On Password

If a supervisor password is known, the Power-On Password can be removed through UEFI BIOS.

Otherwise, contact a Lenovo-authorized service provider.

Forgotten Supervisor Password

A forgotten supervisor password cannot be removed through the normal service procedure.

System board replacement may be required.

Forgotten NVMe Password

If the required NVMe password cannot be recovered, Lenovo cannot reset the password or retrieve the protected data.

Storage replacement may be necessary.

Entering UEFI BIOS

UEFI BIOS performs the initial hardware checks and controls firmware-level settings.

Opening BIOS

1. Restart the computer.
2. Press F1 when the Lenovo logo appears.

BIOS Navigation Keys

Changing System Date and Time

1. Enter UEFI BIOS.
2. Select Date/Time.
3. Set the correct values.
4. Press F10 to save.

Changing the Boot Order

Permanent Startup Sequence

1. Enter UEFI BIOS using F1.
2. Select Startup > Boot.
3. Press Enter.
4. Arrange the startup devices in the required order.
5. Press F10 to save and exit.

Temporary Boot Menu

1. Restart the computer.
2. Press F12 when the logo appears.
3. Select the required startup device.
4. Press Enter.

Viewing BIOS Event Logs

The BIOS Event Log records firmware events and system startup information.

Opening BIOS Event Logs

1. Enter UEFI BIOS.
2. Select Main > BIOS Event Log.
3. Press Enter.
4. Select an event to view its details.

Logged Events

Events can include:

• Computer power-on.
• Firmware password changes.
• Boot device changes.
• BIOS configuration changes.
• POST errors.
• Firmware updates.
• System restarts.
• Security-related events.

Security Chip Configuration

Selected configurations include Discrete TPM 2.0 or Microsoft Pluton TPM 2.0.

The Pluton TPM option is intended for Windows 11.

Changing the Security Chip

Warning: Changing the security chip clears stored security-chip information, potentially including BitLocker encryption keys.

Before making a change:

1. Disable BitLocker Drive Encryption if active.
2. Restart the computer.
3. Press F1 to enter UEFI BIOS.
4. Select Security > Security Chip.
5. Choose the required supported security-chip configuration.
6. Confirm the appropriate TPM 2.0 chip is Active.
7. Press F10 to save and exit.

Resetting UEFI BIOS to Factory Defaults

The UEFI BIOS includes a Reset System to Factory Defaults function.

This function resets firmware settings and related internal data.

Reset Procedure

1. Restart the computer.
2. Press F1 to enter UEFI BIOS.
3. Select Security > Reset System to Factory Defaults.
4. Follow the warning prompts.
5. Complete the required security preparations.
6. Confirm the reset.
7. Enter the applicable firmware password if requested.

The laptop restarts and performs initialization.

Important: The screen may remain blank during the process. Do not interrupt initialization.

UEFI BIOS Self-Recovery

The computer can recover UEFI BIOS from a previously stored secure firmware backup when applicable.

During recovery, the screen may be blank.

Progress is shown through keyboard indicator lights.

BIOS Recovery Indicators

Do not press the Power button during firmware self-recovery.

Wait until the Lenovo logo appears.

Updating UEFI BIOS

BIOS updates may be needed when installing new hardware, drivers, or software.

Updating Through Lenovo Vantage

1. Open Lenovo Commercial Vantage.
2. Check for updates.
3. Select the available UEFI BIOS update package.
4. Follow the installation instructions.

Updating Through Lenovo Support

1. Visit https://pcsupport.lenovo.com.
2. Select the ThinkPad Z13 Gen 1.
3. Find the applicable BIOS update.
4. Follow the installation instructions.

Memory Retraining During BIOS Updates

Some BIOS updates trigger memory retraining.

During this process, the screen may remain blank while the Esc, F1, and F4 LEDs blink.

Do not interrupt the computer.

Wait until the Lenovo logo appears.

FIDO Passwordless Authentication

The ThinkPad Z13 Gen 1 supports FIDO authentication using a compatible registered FIDO2 USB device.

This function requires a power-on password and a registered device.

Registering a FIDO2 USB Device

1. Turn on the computer.
2. Press F12 during startup.
3. Enter the power-on password if prompted.
4. Select App Menu > ThinkShield Passwordless Power-On Device Manager.
5. Connect the compatible FIDO2 USB device.
6. Select the device from Discovered Devices.
7. Confirm the selection.
8. Enter the power-on password when requested.
9. Press the button on the FIDO2 device when prompted.
10. Complete registration.
11. Press Esc and restart.

Using FIDO2 at Startup

1. Restart the computer.
2. Wait for the passwordless authentication screen.
3. Connect the registered FIDO2 device.
4. Follow the prompt to confirm authentication.
5. Allow startup to continue.

The device or password must be supplied within 60 seconds, or the computer shuts down.

Installing Windows

The ThinkPad Z13 Gen 1 supports Windows installation using compatible installation media.

Warning: Reinstalling an operating system can erase data from the internal storage drive.

Back up important files before proceeding.

Windows Installation Procedure

1. Check operating system compatibility.
2. Disable BitLocker encryption when required.
3. Confirm that the correct TPM is Active.
4. Connect the Windows installation drive.
5. Restart the computer.
6. Press F1 to enter UEFI BIOS.
7. Open Startup > Boot.
8. Select the installation device.
9. Confirm the required startup settings.
10. Save the changes.
11. Follow the Windows installation instructions.
12. Install required hardware drivers.
13. Apply Windows updates.

Installing Drivers

Drivers can be installed through Lenovo Vantage or Lenovo Support.

Through Vantage

1. Open Lenovo Commercial Vantage.
2. Check available updates.
3. Select the required driver packages.
4. Follow the installation instructions.

Through Lenovo Support

1. Visit https://pcsupport.lenovo.com.
2. Select the appropriate laptop model.
3. Find the required drivers.
4. Download and install the compatible packages.

Cleaning and Maintenance

Cleaning the Touchpad

Turn off the laptop and gently wipe the haptic touchpad with a soft, lint-free cloth lightly moistened with lukewarm water or appropriate computer cleaner.

Cleaning the Touchscreen

1. Turn off the computer.
2. Use a soft, dry, lint-free cloth.
3. Gently remove fingerprints and dust.
4. Avoid solvents and excessive pressure.

Cleaning Through Lenovo Vantage

Supported Vantage functions allow temporary disabling of the keyboard, display, touchpad, and TrackPoint for cleaning.

Maintenance Tasks

Customer-Replaceable Components

Lenovo identifies certain parts as customer-replaceable units (CRUs).

CRU List

The built-in rechargeable battery is not a customer-replaceable part.

Disabling Fast Startup

Before replacing an internal CRU, disable Windows Fast Startup.

Procedure

1. Open Control Panel.
2. Select Power Options.
3. Click Choose what the power buttons do.
4. Select Change settings that are currently unavailable.
5. Approve the prompt if requested.
6. Clear Turn on fast startup.
7. Save the changes.

Disabling the Built-In Battery

Procedure

1. Restart the computer.
2. Press F1 when the Lenovo logo appears.
3. Select Config > Power.
4. Select Disable Built-in Battery.
5. Press Enter.
6. Confirm Yes.
7. The computer turns off automatically.
8. Allow three to five minutes for cooling.

Removing the Base Cover Assembly

The base cover must be removed to access certain internal components.

Procedure

1. Disable Fast Startup and the built-in battery.
2. Shut down the computer.
3. Disconnect AC power and all cables.
4. Close the display.
5. Turn the laptop over.
6. Remove the base cover retaining screws.
7. Carefully release the cover as shown in the hardware removal diagram.
8. Lift off the base cover.

Reinstalling the Base Cover

1. Align the cover with the computer.
2. Reattach it using the documented installation sequence.
3. Tighten the retaining screws.
4. Reconnect AC power.

If the computer does not start after reinstallation, disconnect and reconnect the AC adapter.

Replacing the M.2 SSD

The Z13 Gen 1 uses an M.2 2242 solid-state drive.

Attention: The SSD contains sensitive electronic components. Incorrect handling can result in permanent data loss.

SSD Replacement Instructions

1. Back up important data.
2. Disable Fast Startup.
3. Disable the built-in battery.
4. Shut down the laptop and disconnect cables.
5. Remove the base cover.
6. Locate the M.2 SSD.
7. Carefully move any protective Mylar film without damaging it.
8. Remove the SSD retaining hardware.
9. Slide the SSD horizontally from its connector.
10. Install the compatible replacement SSD horizontally.
11. Reinstall the retaining hardware.
12. Reposition any protective film.
13. Reinstall the base cover.

SSD Handling Precautions

• Do not touch the electrical contacts.
• Do not apply pressure to the circuit board.
• Avoid shocks and vibration.
• Keep thermal pads in their original positions.
• Do not insert the SSD at an incorrect angle.

Replacing the Wireless WAN Card

Selected configurations support a user-installable wireless WAN module.

Use only a compatible Lenovo-authorized module.

Replacement Instructions

1. Disable Fast Startup and the built-in battery.
2. Turn off the computer.
3. Disconnect power and cables.
4. Remove the base cover.
5. Locate the wireless WAN card.
6. Carefully move the protective Mylar film if present.
7. Disconnect the antenna cables.
8. Remove the retaining screw and card.
9. Install the replacement module.
10. Reconnect the antenna cables.
11. Reinstall the retaining screw.
12. Reinstall the protective film and base cover.

Wireless WAN Antenna Connections

Only Lenovo-authorized wireless modules specifically tested for the model should be installed.

An unsupported module can trigger startup error beeps.

Troubleshooting Guide

Common Problems and Solutions

Computer Does Not Respond

Restart Procedure

1. Press and hold the Power button until the computer turns off.
2. Restart the laptop.

If the computer remains unresponsive:

1. Disconnect AC power.
2. Insert a straightened paper clip into the emergency-reset hole.
3. Reconnect the AC adapter.
4. Start the computer.

Black Screen During Startup

The ThinkPad Z13 Gen 1 includes an LCD Self-Test function.

Running the LCD Self-Test

1. Connect the AC adapter.
2. Press and hold Power for approximately seven seconds to shut down the computer.
3. Press Fn + Left Ctrl + Power simultaneously.
4. Observe the screen.

If the screen displays five solid colors in sequence, the LCD is operating normally.

The test runs for approximately 20 seconds and exits automatically.

Press Power to exit manually.

Error Messages

Error Code Guide

UEFI Variable Storage Nearly Full

This message indicates insufficient available space in the non-volatile UEFI variable storage.

Recovery Procedure

1. Press F1 when the error appears.
2. Open the UEFI BIOS prompt.
3. Review the storage cleanup confirmation.
4. Select the appropriate option.

Selecting Yes removes operating-system or application-created UEFI variable data except the protected global variables specified by UEFI.

Selecting No preserves existing data but may prevent applications from modifying that storage.

Beep Error Troubleshooting

The ThinkPad Z13 Gen 1 supports Lenovo SmartBeep diagnostic technology.

SmartBeep uses a compatible smartphone application to decode startup beep errors.

Using Lenovo SmartBeep

1. Visit https://support.lenovo.com/smartbeep.
2. Install the supported diagnostic application on a smartphone.
3. Run the application.
4. Hold the smartphone near the laptop.
5. Press Fn on the computer to repeat the beep sequence.
6. Review the decoded diagnostic information.

Do not attempt unsupported internal repairs.

Warranty Information

The ThinkPad Z13 Gen 1 is covered by the applicable Lenovo Limited Warranty.

Warranty coverage and service conditions depend on the individual product and its applicable service terms.

Warranty Resources

Warranty Services

Applicable warranty services can include:

• Problem diagnosis.
• Covered hardware repair.
• Authorized engineering changes.

Additional services may be purchased where available.

Customer Support Information

Lenovo Support Resources

Before Contacting Lenovo

Prepare the following:

• Product name.
• Machine type and serial number.
• Installed operating system.
• Exact error codes or messages.
• Description of the problem.
• Whether the problem is continuous or intermittent.
• Applications running when the issue occurred.
• Steps needed to reproduce the problem.

The machine type and serial number are printed on the computer’s identification label.

Frequently Asked Questions

1. How do I enter BIOS on the Lenovo ThinkPad Z13 Gen 1?

Restart the laptop and press F1 when the Lenovo logo appears. This opens the UEFI BIOS menu, where startup devices, passwords, security settings, and firmware configuration can be managed.

2. How do I charge the ThinkPad Z13 Gen 1?

Connect the compatible 65 W USB-C power adapter. The laptop supports rapid charging to approximately 80% in one hour when turned off, depending on the battery and operating conditions.

3. Can I upgrade the RAM on the ThinkPad Z13 Gen 1?

The laptop uses soldered LPDDR5 memory with configurations supporting up to 32 GB. The onboard memory is not a customer-replaceable upgrade component.

4. How do I replace the SSD in the ThinkPad Z13 Gen 1?

Disable Windows Fast Startup and the built-in battery, disconnect power, remove the base cover, and follow the M.2 SSD replacement procedure. The Z13 Gen 1 uses an M.2 2242 SSD.

5. How do I turn off the camera on the ThinkPad Z13 Gen 1?

Press F9 to activate the camera privacy function. When the F9 indicator is illuminated, the camera is disabled.

6. How do I reset an unresponsive ThinkPad Z13 Gen 1?

Press and hold Power to turn off the computer. If it remains unresponsive, disconnect AC power, use a straightened paper clip in the emergency-reset hole, reconnect power, and restart.

7. How do I connect an external monitor to the ThinkPad Z13 Gen 1?

Use a compatible USB-C display connection or adapter. The USB4 ports support external displays, and a compatible wireless monitor can be connected using Windows + K when Miracast is supported.