Philips Portable DVD Player PET805

Portable DVD Player PET805

Read the Philips PET805 portable DVD player manual: setup, battery charging, playback controls, SETUP menu options, specifications, and troubleshooting.
Document type
User Manual
Model number(s)
PET805
Language
English

Read the User Manual (PDF)

Follow the manufacturer’s safety warnings and check your exact model before using these instructions.

The Philips PET805 is a portable DVD player with a built-in LCD screen. It plays DVD-Video discs, Video CDs, audio CDs (including CD-R, CD-RW, DVD+R and DVD+RW), MP3 CDs, and CDs with JPEG photos. You can run it from the AC adapter, the car adapter, or the rechargeable battery pack. It also connects to a TV or amplifier through audio/video and coaxial digital outputs. The remote control and on-screen menus cover disc features such as subtitles, camera angles, audio language selection, and a parental lock.

What’s in the Box

The package should contain:

  • Portable DVD player
  • Remote control
  • 12V car adaptor
  • AC power adaptor
  • Rechargeable battery pack
  • Audio/video cable
  • User manual and warranty
  • Travel bag (depending on region)

Product Specifications

ItemSpecification
Dimensions19.3 x 16.1 x 3.0 cm (7.72 x 6.44 x 1.2 in)
Weight1.12 kg (2.6 lb)
Power supplyDC 9V, 2.2A
Power consumption30W or less
Operating temperature0–50°C (32–122°F)
Laser wavelength650 nm
Video systemNTSC / PAL / AUTO
Frequency response20 Hz–20 kHz ± 1 dB
Signal-to-noise ratio85 dB or higher
Dynamic range80 dB or higher
Channel separation85 dB or higher
Analog audio output2V ± 10%, 10 kΩ load
Video output1 Vp-p ± 20%, 75 Ω load

Philips reserves the right to change specifications without notice (p. 26).

Parts and Controls

The main unit has a compact set of keys: previous/next, search backward/forward, SETUP, MENU, MONITOR, OSD, SOUND, cursor keys with OK, play, pause, stop, and OPEN for the disc door. The POWER/CHG indicator and the IR sensor for the remote are on the front. A slide switch turns the player on and off.

Connections include two headphone jacks (PHONES 1 and 2), AUDIO OUT, VIDEO OUT, a COAXIAL digital audio jack, and the DC IN 9V socket. Volume is adjusted with the rotary control on the right side of the unit.

The remote control duplicates most of these keys. It adds a numeric keypad, AUDIO, SUBTITLE, LANGUAGE, ANGLE, ZOOM, A>B, PLAY-MODE, REPEAT, MUTE, slow motion, and RETURN (used for VCD menu pages).

Power and Battery Setup

AC and car power

Connect the supplied AC adapter to the player and a wall outlet. Check that the adapter’s input voltage matches your local voltage, or you may damage both the adapter and the player. For car use, plug the car adapter into the cigarette lighter outlet, and make sure its input voltage matches the vehicle’s. Switch the player off before unplugging an adapter. Hold the plug, not the cord, when disconnecting (p. 2, p. 10).

Charging the battery pack

  1. Switch the player off and attach the battery pack.
  2. Connect the AC adapter to the player and the outlet.
  3. Charge until the red indicator turns off. This takes about 4.5 to 6.5 hours when charging from power off.

The pack may get warm while charging, which is normal. A low-battery icon appears on screen when power is running out.

To remove the pack, switch off the player, unplug the adapter, turn the player upside down, press down the battery lock switch, and slide the pack off (p. 11).

Remote control battery

The remote uses one 3V CR2025 lithium battery. Pull out the protective plastic tab the first time you use it. Remove the battery if the remote won’t be used for a long time (p. 10).

Connecting Headphones, a TV, or an Amplifier

Plug headphones into either PHONES jack. To connect a TV or amplifier, turn the player off first. Plug the cable’s output ends (yellow and black) into the player’s AUDIO/VIDEO jacks. Then connect the input ends to the other device: yellow for video, white for left audio, red for right audio. The COAXIAL jack can carry digital audio instead. The player works with NTSC, PAL, and AUTO television sets (p. 12).

Playing Discs

Loading a disc

  1. Press OPEN to release the disc door.
  2. Place the disc label side up, even for double-sided DVDs, and make sure it sits in the recess.
  3. Close the door gently.
  4. Slide the POWER switch to ON.

A DVD starts automatically. For an audio or video CD, press play once the screen shows the disc type. For MP3 and JPEG discs, use the cursor keys to pick a folder and press OK. JPEG folders start a slide show automatically (p. 14–15).

DVDs carry region codes. If the disc’s region doesn’t match the player, a notice appears and the disc won’t play, so remove it.

Setting the on-screen language

English is the default. Slide the player on, press SETUP, choose GENERAL SETUP, select OSD LANG, and pick a language. American models offer English, French, and Spanish (p. 14).

Playback controls

  • Skip: Press next or previous briefly, or key in a title, track, or chapter number.
  • Pause and step: Press pause once for a still picture. Press it again, then repeatedly, to step frame by frame. OK resumes play.
  • Search: Press the search keys repeatedly for 2x, 4x, 8x, 16x, and 32x in either direction.
  • Slow motion: Four forward speeds from 1/2x to 1/16x. Backward slow motion is for DVDs only.
  • Zoom: Cycles through 2x, 3x, 4x, then 1/2, 1/3, 1/4, and back to normal.
  • Audio output: AUDIO cycles through mono left, mono right, mixed mono, and stereo.
  • Repeat: On DVDs, repeats chapter, title, or all. On VCDs, repeats track or all.
  • A>B loop: Press A>B at the start point, again at the end point, and a third time to exit.
  • Play modes: PLAY-MODE selects shuffle, random, or program.
  • Mute: Press MUTE to silence the player and press it again to restore sound.

On the main unit, press MONITOR repeatedly and use left/right to adjust brightness, color, and display mode (normal or full screen). Press SOUND to adjust the virtual surround effect (p. 16–18).

If a prohibited-operation icon appears, the player or the disc doesn’t allow that action. Some discs limit what you can do during playback, so check the disc inlay (p. 13).

DVD features

MENU opens the disc menu. ANGLE steps through camera angles when the disc offers them. LANGUAGE and SUBTITLE cycle through the available audio and subtitle options. You can also reach most of these through the OSD key, which lists title, chapter, audio, subtitle, angle, time search, repeat, and time display (p. 19–20).

SETUP Menu Options

Press SETUP and use the cursor keys and OK (p. 21–23).

  • General Setup: TV display ratio, TV type (NTSC/PAL), OSD language, SPDIF digital audio, captions, and screen saver.
  • Audio Setup: Speaker setup, Dolby Digital, channel equalizer, and 3D processing.
  • Preferences: Default audio, subtitle, and disc menu languages, parental controls, and a DEFAULT option to restore factory settings.
  • Password Setup: Turns the password mode on or off and changes the password. The default password is 99999.

Parental options can only be changed while password mode is switched off.

Safety Instructions

  • Don’t open the player. The laser can harm your eyes, and servicing belongs to qualified personnel. Don’t touch the lens.
  • The player isn’t waterproof. Keep it away from dripping or splashing liquid and don’t place vases or candles on it. If liquid or objects get inside, unplug the adapter.
  • Keep it away from heaters and direct sunlight.
  • Don’t use cleaners containing alcohol, ammonia, benzene, or abrasives.
  • Listen at a moderate volume. High-volume headphone use can damage hearing.
  • Don’t use the player while driving or cycling.
  • Don’t touch the adapter with wet hands, and don’t pull on the cord.
  • Install batteries with correct polarity, never mix old and new or different types, and remove them during long storage (p. 2–3).

The player’s surface can warm up during long use, which is normal.

Cleaning and Maintenance

Wipe discs from the center outward with a soft, lint-free cloth. Don’t attach paper or tape to a disc, keep discs out of sunlight, and store them in cases after playback. Keep the disc door closed so dust stays off the lens. If discs read poorly, try a commercially available lens-cleaning disc before seeking repair, because other methods can damage the lens (p. 3, p. 9).

Moving the player from cold to warm surroundings can fog the lens and prevent playback. Leave it in a warm room until the moisture evaporates. A few tiny black or colored dots on the LCD are a normal result of manufacturing and don’t indicate a fault (p. 3).

Troubleshooting

ProblemWhat to try
No powerCheck both ends of the mains cord, test the outlet with another appliance, and confirm the battery pack and car adaptor are seated properly.
Distorted pictureClean fingerprints from the disc. Minor distortion occasionally appears and isn’t a malfunction.
Completely distorted picture or no colorMatch the player’s NTSC/PAL setting to your TV.
Black-and-white or distorted pictureUse discs that match your TV system (PAL or NTSC).
No soundCheck audio connections. With an amplifier, try another source.
No digital audio outputCheck the digital connections and confirm digital output is on in SETUP.
Disc won’t playMake sure the label faces up, clean the disc, and test another disc.
Remote doesn’t respondAim it at the front sensor, clear obstructions, and check or replace the battery.
Some commands don’t workThe disc may not permit them. Check the disc inlay.

Don’t attempt repairs yourself, since that voids the guarantee. If these steps fail, contact your dealer or a service center (p. 24–25).

Frequently Asked Questions

How long does the PET805 battery take to charge?

With the player switched off, the battery pack charges in roughly 4.5 to 6.5 hours. The red POWER/CHG indicator goes out when charging is finished.

Why won’t my DVD play even though the disc is fine?

Region codes are the usual reason. If the disc’s region differs from the player’s, a notice appears and the disc won’t play. Also check that the label side is up and that the lens hasn’t fogged after a move from cold to warm air.

Can I connect the PET805 to a TV?

Yes. Use the supplied audio/video cable: yellow carries video, white and red carry left and right audio. A coaxial jack is also available for digital audio. Set the player’s TV type to match your TV’s NTSC or PAL system.

What is the default password, and how do I change it?

The default is 99999. Open SETUP, go to PASSWORD SETUP, and choose PASSWORD. Parental settings can only be adjusted while password mode is off.

Which discs and file types can the PET805 play?

It plays DVD-Video, Video CDs, and audio CDs, including CD-R, CD-RW, DVD+R and DVD+RW. It also plays MP3 CDs and CDs with JPEG photos. The manual doesn’t list other file formats.

Why does the player get warm?

The surface heats up during long use, which is normal. The battery pack can also become warm while charging.

Why does the remote control not work?

Point it directly at the IR sensor on the front of the player with nothing blocking the path. Check the CR2025 battery and make sure the protective plastic tab has been removed.

What does the warranty cover?

The warranty offers a free exchange for defects within 90 days of purchase. From day 91 to one year, you can exchange for a preset fee. Proof of purchase is required. Commercial or rental use and unauthorized repairs are excluded (p. 4).

Follow the manufacturer’s safety warnings and check your exact model before using these instructions. Report an error.

Document information and editorial sourcing

The product instructions/information above in this page are based on the original manufacturer document.

Last updated: November 22, 2026

Find more product manuals in:

Related Philips Manuals